RSA
DESCRIPTION
An adjustable multi-lamp recessed fixture with available 0.75” (19mm)
trim flange, trimless for mud-in drywall and truly trimless for hard surface
and special ceiling installations. Combolight LED is offered in various LED
module configurations from One to Six (1-6) LED Modules.
Applicable for remodel, below the ceiling installation applications in non
IC conditions. For non-IC applications, insulation must be kept 3” (76mm)
from all sides and at least 1”(25mm) above the housing.
Catalog #
Type
Project
Comments
Date
Prepared by
SPECIFICATION FEATURES
Housing
LED Modules
Compliance
Housing and junction box are
constructed from CRS. Trim &
trimless meshplate assembly are
all steel construction
1, 2, 3, 4, 5 or 6 LED modules
mounted in adjustable double
gimbals with field changable
optics. 40° x 40° locking lamp
adjustment. Spacer rings are
available for additional media.
Passive cooling achieves L70 at
50,000 hours. Various lumen ranges
from 613-2432 lumens per module
as well as minimum CRI from 90-95
dependent on modules choice.
Type Non-IC inherently protected,
insulation must be kept 3”
(76mm) from all sides and at least
1”(25mm) above the housing.
cULus listed for damp locations.
Contains no mercury or lead and
RoHS compliant. Photometric
testing in accordance with IES
LM-79-08. Lumen maintenance
projections in accordance with
IES LM-80-08 and TM-21-11.
Trim / Trimless / Special Ceiling
Warranty
System Protection / Electrical
Thermal protection provided
to guard against overheating.
Junction Box is UL listed for
through branch wiring, 6 #12 90º
C conductors or 60º C for end of
run. Electrical accessible through
ceiling opening. Integral LED
drivers are mounted in a separate
metal enclosure box attached
to the housing with 18” flexible
conduit. Includes a separated
wiring compartment with
knockouts and a maintenance
door.
COMBOLIGHT®
Gen 3
Recessed
Multi-Lamp Fixture
One-Six (1-6) LED Modules
Remodel
Housing
w/ 0.75” (19mm) Trim Flange
5 year warranty
Trimmed housing utilizes a
removable trim sleeve to provide
a 0.75” flange around the ceiling
aperture. Trimless housing includes
Ceiling Cut-Out:
perforated meshplate for trimless
C1 = 6.55" x 6.55"
installation in drywall/ plaster
C2 = 6.94" x 12.47"
ceilings by allowing the ceiling’s
C3 = 6.94" x 18.16"
mudding compound to be applied
C4 = 6.94" x 23.85"
right up to the edge of the fixture
C5 = 6.94" x 29.54"
opening. Includes a beveled “knifeC6 = 6.94" x 35.23"
edge” lip to ensure a clean
CX = 12.47" x 12.47"
edge. Special Ceiling applications
feature a welded collar for hard
Trim Flange is 0.75”
surface applications.
Trimless Meshplate is 3.15”
**LED3X and LED4X gimbal adjust 30°x37°
Optical
Accessories
(Sold Separately)
CAT #
Nominal Lumens
Input Watts
LED1
613
7.26
LED2
1091
14.14
LED3
1508
25.83
LED1X
689
9.6
LNB-LVR
Hex Cell Louver
LED2X
1259
18.25
LNB-CB
Cross Baffle
LED3X
1777
26.12
LNB-SN
Snoot
LED4X
2432
40.74
LNC-
Use LNC- when using
Xicato Narrow Beam
LED5X
1146
16.83
Series
ORDERING INFORMATION
Housing
CCT
C1 = One Light
C2 = Two Light
C3 = Three Light
C4 = Four Light
C5 = Five Light
C6 = Six Light
CX = Four Square
R = Remodel
27 = 2700K
30 = 3000K
35 = 3500K
40 = 4000K
Part #
LNB-DSL Diffusion Spread Lens
LNB-LSL
Linear Spread Lens
LNB-PSL Prismatic Spread Lens
Lamp Type / Wattage
Label
Beam
Angle
Power Supply
/ Dimming
Input
Voltage
Lamp
Mechanism
Housing
Interior
Finish
Trim Finish
Accessories
LED1 = 613 Lumens 90+ CRI
LED2 = 1091 Lumens 90+ CRI
LED3 = 1508 Lumens 90+ CRI
LED1X = 689 Lumens Xicato
Artist 95+ CRI
LED2X = 1259 Lumens
Xicato Artist 95+ CRI
LED3X = 1777 Lumens
Xicato Artist 95+ CRI **
LED4X = 2432 Lumens
Xicato Artist 95+ CRI **
LED5X = 1146 Lumens Xicato
XIM Artist 95+ CRI
N = Narrow
M = Medium
W= Wide
E = ELV
Z = 0-10V
D = DALI
L = Lutron A-
U = 120-277V
G = Standard
Double Gimbal
R = Retractable
Double Gimbal
E= Regressed
Double Gimbal
W = White
B = Black
S = Silver
W = White
B = Black
S = Silver
N = Trimless
* Media ring required
for optical accessories
Eaton
18001 East Colfax Avenue
Aurora, CO 80011
United States
www.Eaton.com/lighting
Series
1= Media ring
for 1 media
2 = Media ring for 2
media
Specifications and dimensions
subject to change without notice
TD511001EN
2015-9-1