STEALTH
Recessed Square and Rectangular
Accent and Wall Wash Fixtures
STEALTH
It’s there. Look a little closer.
The architectural recessed lighting system
by RSA that illuminates an interior without
overwhelming it.
Clean lines, smooth surfaces, attention to detail.
Today’s architectural interiors say much more
with less. RSA’s Stealth recessed lighting fixtures
enable lighting designers and specifiers to bring
their interior designs to life without adding physical
clutter to the environment.
Illumination for illumination’s sake.
Stealth disappears into the ceiling and provides
unparalleled versatile aiming mechanics. With
both accent and wall wash mechanisms, most
architectural lighting challenges are accomplished
with ease. A selection of trim inserts and popular
architectural finishes help to blend Stealth into any
residential or commercial environment.
All of these features are built into a compact,
solidly constructed recessed lighting fixture that is
perfect for applications in high-end residential and
commercial environments.
New lamps
Stealth is now offered with a choice of low
voltage MR16 (50W max) or new ceramic
metal halide MR16 lamps in 20W or 39W.
2
Designed to perform
The design and construction of Stealth far exceeds
the standards of normal, everyday recessed lighting
equipment. Attention to the finest details are made
to deliver an architectural lighting product that does
exactly what it should... perform. From the solidly built
housings to the precision designed lamp mechanisms
to designer-friendly locking features, Stealth has
raised the bar for high-end recessed lighting.
3
STEALTH ACCENT
HOUSING
Heavy duty hanger bars for residential
installations.
Perforated mesh frame for drywall ceilings.
Removable for flanged trim insert or trimless
installation in special ceiling materials.
Trim insert is retained with spring-loaded
ball catches and is easily removed for
maintenance access.
Heavy duty butterfly brackets for
commercial installations.
Housing vent holes provide cooler
operation and are shielded from sight
below the ceiling.
Offered in standard architectural finishes.
Transformers/Ballasts and wiring are easily
accessible from below the ceiling through
the trim insert opening.
Stealth Accent is also offered in a one
lamp remodel unit. See page 8 - 9.
4
STEALTH ACCENT
TRIM INSERTS
LAMP MECHANISM
achined HOT AIMING knob may be
M
rotated by hand for 0º to >40º aiming
capability while the fixture is powered on.
The precision rack and pinion gear mechanism
slowly adjusts the pivot of the lamp.
RG 1 Light
RG 2 Light
RG 3 Light
The Die Cast RG Regressed insert provides the classic ‘stealth’ look.
The trim sidewall pitches up at a 45º angle providing greatly reduced
glare. The lamp mechanism places the light beam pivot at the center
of the top aperture of the insert.
The mechanical locking feature ensures
the lamp holder will remain in the intended
position both during and after relamping.
FW 1 Light
FW 2 Light
FW 3 Light
TW 1 Light
TW 2 Light
TW 3 Light
The FW and TW inserts provide a unique windowed look with individual
2” square apertures for each lamp. The FW inserts utilize the same
meshplate as the RG inserts for a clean trimless installation. The TW
inserts provide a traditional flanged installation with a slight overlap
around the ceiling cut-out.
FS 2 Light
FS 3 Light
TS 2 Light
TS 3 Light
The FS and TS inserts provide continuous slot aperture at the ceiling
line. The opening is the same size as the upper aperture of the RG
trim. Once again, both two and three light inserts are available in
trimless or flanged versions.
he rotating mounting plate provides 370º
T
rotational adjustment. The use of an overcenter stop mechanism enables full rotation
without the risk of short circuiting the fixture
due to pinched wire leads.
noots are included on all lamp holders.
S
Snoots are secured with bullet catches
and are easily removed for maintenance.
The accessory lock feature ensures that
lenses resume their original position post
maintenance.
5
STEALTH ACCENT NEW CONSTRUCTION
HIGH-END RETAIL Single lamp Stealth Accent fixtures with
39 watt Metal Halide MR16 lamps are used throughout this jewelry
store for general downlight illumination as well as accent lighting
for the merchandise. The versatile internal lamp mechanism allows
architectural and decorative elements to be illuminated as well.
Stealth Accent New Construction Features
• For use in drywall (up to 1” thick) and non-drywall ceiling (up to
1.13” thick) installations such as wood or marble.
• Three options for trim inserts: Regressed Trimless, Flush Trimless
or Flanged.
• Includes mesh plaster frame for trimless installation and direct
fastening through drywall to perforated metal backing wings. May
be discarded for special ceiling and/or flanged insert installation.
• Trim insert is easily removed for maintenance and provides
excellent cut-off.
• Independently adjustable locking lamp holders with 370º x >40º
adjustability and hot-aiming capability.
370º
370º
Lamp
40º
0º
Lamp
40º
0º
• Configured with a choice of electronic, magnetic or toroidal low
voltage transformers for 12V lamps or with electronic metal halide
ballasts for CMH lamps.
• Electrical J-Box and transformers / ballasts are located on the ends
of the housing compartment and are easily accessed through the
aperture.
Transformers/Ballasts
• Includes butterfly brackets for commercial installations and hanger
bars for residential installations.
• Meets EMI & RFI per Title 47 CFR, Part 18 for consumer limits when
operated at 120VAC, and non-consumer limits at 277VAC.
STEALTH ACCENT NEW CONSTRUCTION
Fixture Ordering
By following the steps below, you may specify a
complete STEALTH ACCENT fixture including housing,
electrical and trim insert in one complete number.
MR16
12V
STEALTH ACCENT NEW CONSTRUCTION FIXTURE
MR16
METAL
HALIDE
S3SN
S1SN
LAMP QUANTITY / CONFIGURATION
S1S
One (1) Light Housing for Square Insert
S2S
Two (2) Light Housing for Rectangular Insert
S3S
Three (3) Light Housing for Rectangular Insert
HOUSING CONSTRUCTION
N
New Construction
S2SN
LAMP WATTAGE / TYPE
050M16
50 Watt max. MR16 12V
020C16
039C16
20 Watt MR16 Metal Halide
39 Watt MR16 Metal Halide
RG
POWER SUPPLY
E
Electronic Transformer or Ballast
M
Magnetic Transformer (for 12V MR16 only)
T
Toroidal Transformer (for 12V MR16 only)
STEALTH ACCENT NEW CONSTRUCTION
FS
FW
PRIMARY VOLTAGE
1
120 Volts
2
277 Volts
NOTE: De-rated wattage labeling available. 12V primary voltage is available.
TS
TW
TRIM INSERT
RG
Die-Cast Trimless Regressed Insert
FS
Flush Trimless Slot Insert
FW
Flush Trimless Window Insert
TS
Trim Flanged Slot Insert
TW
Trim Flanged Window Insert
A
F
B
C
TRIM FINISH
B
Black Powder Coat
W
White Powder Coat
S
Industrial Silver Powder Coat
D E
NOTE: Custom colors are available upon request. Consult factory for specifications.
GH
Optical Accessories
LNB-CLR
LNB-LVR
LNB-UVF
LNB-RED
LNB-BLU
LNB-AMB
LNB-PCH
LNB-MWL
LNB-DSL
LNB-PSL
Clear Protective Glass Lens
Hex Cell Louver
Optivex™ UV Filter
Red Color Filter
Blue Color Filter
Amber Color Filter
Cosmetic Peach 2800K Filter
Milk White Lens
Diffusion Spread Lens
Prismatic Spread lens
S2S N 050M16 E 1 RG B
NEW CONSTRUCTION - Dimensions
Config.
A
B
C
RG/FS/FW
S1SN
S2SN
S3SN
D
TS/TW
20.05” 10.00” 4.29” 5.00”
29.92” 16.50” 10.79” 11.50”
36.43” 23.00” 17.29” 18.00”
RG/FS/FW
TS/TW
4.29”
4.29”
4.29”
5.00”
5.00”
5.00”
E
F
G
10.00”
10.00”
10.00”
6.34”
6.34”
6.34”
7.53”
7.53”
7.53”
Ordering Example
Two (2) Light 12V 50 Watt MR16 STEALTH ACCENT New Construction,
Electronic 12V Transformer 120V Primary, “RG” Die Cast Insert, Black Finish
7
STEALTH ACCENT REMODEL
RESIDENTIAL REMODEL The clean lines of this kitchen
are complemented by Stealth’s unintrusive ceiling presence. Single
lamp remodel fixtures with 37 and 50 watt 12V MR16’s are utilized
in this application for general downlight illumination as well as task
lighting at the counter tops.
Stealth Accent Remodel Features
• For remodel installation in drywall.
• Three options for trim inserts: Regressed Trimless, Flush Trimless
or Flanged.
• Includes mesh plaster frame for trimless installation and direct
fastening through drywall.
• Trim insert is easily removed for maintenance and provides
excellent cut-off.
• Independently adjustable locking lamp holders with 370º x >40º
adjustability and hot-aiming capability.
370º
370º
Lamp
40º
0º
Lamp
40º
0º
• Configured with a choice of electronic, magnetic or toroidal low
voltage transformers for 12V lamps or with electronic metal halide
ballasts for CMH lamps.
• Electrical J-Box and transformer / ballast are located at the end
of the housing compartment and are easily accessed through the
aperture.
Transformers/Ballasts
• Heavy duty swing-out mounting clips are adjustable for various
ceiling thicknesses up to 1.5”.
• Meets EMI & RFI per Title 47 CFR, Part 18 for consumer limits when
operated at 120VAC, and non-consumer limits at 277VAC.
8
STEALTH ACCENT REMODEL
Fixture Ordering
By following the steps below, you may specify a
complete STEALTH ACCENT REMODEL fixture
including housing, electrical and trim insert in one
complete number.
LAMP QUANTITY / CONFIGURATION
S1S
One (1) Light Housing for Square Insert
MR16
12V
STEALTH ACCENT REMODEL FIXTURE
MR16
METAL
HALIDE
S1SR
RG
HOUSING CONSTRUCTION
R
Remodel
LAMP WATTAGE / TYPE
050M16
50 Watt max. MR16 12V
020C16
039C16
FW
20 Watt MR16 Metal Halide
39 Watt MR16 Metal Halide
POWER SUPPLY
Electronic Transformer or Ballast
E
M
Magnetic Transformer (for 12V MR16 only)
T
Toroidal Transformer (for 12V MR16 only)
TW
PRIMARY VOLTAGE
1
120 Volts
2
277 Volts
NOTE: De-rated wattage labeling available. 12V primary voltage is available.
STEALTH ACCENT REMODEL
TRIM INSERT
RG
Die-Cast Trimless Regressed Insert
FW
Flush Trimless Window Insert
TW
Trim Flanged Window Insert
A
TRIM FINISH
B
Black Powder Coat
W
White Powder Coat
S
Industrial Silver Powder Coat
G
B
NOTE: Custom colors are available upon request. Consult factory for specifications.
C
E F
D
Optical Accessories
LNB-CLR
LNB-LVR
LNB-UVF
LNB-RED
LNB-BLU
LNB-AMB
LNB-PCH
LNB-MWL
LNB-DSL
LNB-PSL
Clear Protective Glass Lens
Hex Cell Louver
Optivex™ UV Filter
Red Color Filter
Blue Color Filter
Amber Color Filter
Cosmetic Peach 2800K Filter
Milk White Lens
Diffusion Spread Lens
Prismatic Spread lens
S1S R 050M16 E 1 RG B
REMODEL - Dimensions
Config.
S1SR
A
15.71”
B
14.25”
C
4.29”
D
4.29”
E
7.34”
F
9.50”
G
6.34”
Ordering Example
One (1) Light 12V 50 Watt MR16 STEALTH ACCENT Remodel,
Electronic 12V Transformer 120V Primary, “RG” Die Cast Insert, Black Finish
9
STEALTH WALL WASH
HOUSING
Heavy duty hanger bars for residential
installations.
Perforated mesh frame for drywall ceilings.
Removable for special ceiling materials.
Individual trim inserts are easily removed
for maintenance access.
Heavy duty butterfly brackets for
commercial installations.
Housing vent holes provide cooler
operation and are shielded from sight
below the ceiling.
Offered in standard architectural finishes.
Transformers/Ballasts and wiring are easily
accessible from below the ceiling through
the trim insert opening.
Stealth Wall Wash is also offered in a one
lamp remodel unit. See page 14 - 15.
10
STEALTH WALL WASH
TRIM INSERT
Stealth Wall Wash Trim Inserts are modular.
Each individual insert can accept one MR16
lamp in fixed position. The bi-pin or GX10
TAL socket is mechanically attached to a
vertical plate. The linear spread lens is held
in place with two spring clips.
WW 1 Light
WW 2 Light
WW 3 Light
The Die Cast WW Regressed insert complements the look of the
RG Accent insert but provides a completely different illumination
function. This state-of-the-art wall wash mechanism features a fixed
lamp position at a 20º pitch and an integral kicker reflector. Light is
directed through a frosted linear spread lens which evenly distributes
the output over vertical surfaces.
CONSISTENCY The new divider blocks in the two and three
light Stealth Wall Wash fixtures ensure that the overall dimensions
of the finished, installed fixture will be the same as the respective
Stealth two and three light RG Accent fixtures. This not only ensures
a clean, consistent looking installation when both fixture types are
specified, but allows the fixture to utilize much of the same hardware
during production.
A divider block is implemented to precisely
space the trim inserts apart from each
other for optimum light performance.
3 Light RG Accent Insert
3 Light Wall Wash Insert Assembly
Same Footprint
11
STEALTH WALL WASH NEW CONSTRUCTION
RESTAURANT
The unique canopy structures in this eating
establishment are surfaced with a high-end wood veneer and require
trimless lighting fixtures for both downlighting and wall washing tasks.
Stealth Wall Wash fixtures with metal halide lamps are the perfect
choice due to their clean trimless installation and optimum lighting
output for vertical surfaces.
Stealth Wall Wash New Construction Features
• For use in drywall (up to 1” thick) and non-drywall ceiling (up to
1.13” thick) installations such as wood or marble.
• Next generation trimless installation provides direct aperture to
ceiling transition.
• Includes mesh plaster frame for trimless installation and direct
fastening through drywall to perforated metal backing wings. May
be discarded for special ceiling.
• Architectural DIE CAST regressed trim is easily removed for
maintenance and provides excellent cut-off.
• Fixed lamp with integral reflective “kicker” plate and linear spread
lens provides high-performance and even illumination on vertical
surfaces. Lamp sockets are mounted to the trim insert with quickconnect socket leads.
Lamp
Lamp
Reflector
20º
Reflector
20º
• Configured with a choice of electronic, magnetic or toroidal low
voltage transformers for 12V lamps or with electronic metal halide
ballasts for CMH lamps.
• Electrical J-Box and transformers / ballasts are located on the ends
of the housing compartment and are easily accessed through the
aperture.
Transformers/Ballasts
• Includes butterfly brackets for commercial installations and hanger
bars for residential installations.
• Meets EMI & RFI per Title 47 CFR, Part 18 for consumer limits when
operated at 120VAC, and non-consumer limits at 277VAC.
12
STEALTH WALL WASH NEW CONSTRUCTION
Fixture Ordering
By following the steps below, you may specify a
complete STEALTH WALL WASH fixture including housing,
electrical and trim insert in one complete number.
STEALTH WALL WASH NEW CONSTRUCTION FIXTURE
MR16
12V
MR16
METAL
HALIDE
S1SN
LAMP QUANTITY / CONFIGURATION
S1S
One (1) Light Housing for Square Insert
S2S
Two (2) Light Housing for Rectangular Insert
S3S
Three (3) Light Housing for Rectangular Insert
HOUSING CONSTRUCTION
N
New Construction
S2SN
WW
LAMP WATTAGE / TYPE
050M16
50 Watt max. MR16 12V
020C16
039C16
20 Watt MR16 Metal Halide
39 Watt MR16 Metal Halide
S3SN
STEALTH WALL WASH NEW CONSTRUCTION
POWER SUPPLY
E
Electronic Transformer or Ballast
M
Magnetic Transformer (for 12V MR16 only)
T
Toroidal Transformer (for 12V MR16 only)
PRIMARY VOLTAGE
1
120 Volts
2
277 Volts
NOTE: De-rated wattage labeling available. 12V primary voltage is available.
TRIM INSERT
WW
Die-Cast Trimless Wall Wash Insert
A
F
TRIM FINISH
B
Black Powder Coat
W
White Powder Coat
S
Industrial Silver Powder Coat
B
C
NOTE: Custom colors are available upon request. Consult factory for specifications.
D E
GH
D
NEW CONSTRUCTION - Dimensions
Config.
S1SN
S2S N 050M16 E 1 WW B
A
20.05”
B
10.00”
C
4.29”
D
4.29”
E
10.00”
F
6.34”
G
7.53”
S2SN
29.92”
16.50”
10.79”
4.29”
10.00”
6.34”
7.53”
S3SN
36.43”
23.00”
17.29”
4.29”
10.00”
6.34”
7.53”
Ordering Example
Two (2) Light 12V 50 Watt MR16 STEALTH Wall Wash New Construction,
Electronic 12V Transformer 120V Primary, “WW” Die Cast Wall Wash Insert, Black Finish
13
STEALTH WALL WASH REMODEL
COLORS
The interior design of this residence combines
whimsical colors and details with a clean architectural look and feel.
The even spacing of 3-light Stealth Wall Wash fixtures help to bring
out the rich blue and floral artwork on the far wall without blowing out
the color. Stealth Accent fixtures help to round out the lighting design.
Stealth Wall Wash Remodel Features
• For remodel installation in drywall.
• Three options for trim inserts: Regressed Trimless, Flush Trimless
or Flanged.
• Includes mesh plaster frame for trimless installation and direct
fastening through drywall.
• Architectural DIE CAST regressed trim is easily removed for
maintenance and provides excellent cut-off.
• Fixed lamp with integral reflective “kicker” plate and linear spread
lens provides high-performance and even illumination on vertical
surfaces. Lamp sockets are mounted to the trim insert with quickconnect socket leads.
Lamp
Lamp
Reflector
20º
• Configured with a choice of electronic, magnetic or toroidal low
voltage transformers for 12V lamps or with electronic metal halide
ballasts for CMH lamps.
• Electrical J-Box and transformer / ballast are located at the end
of the housing compartment and are easily accessed through the
aperture.
Transformers/Ballasts
• Heavy duty swing-out mounting clips are adjustable for various
ceiling thickness up to 1.5”.
• Meets EMI & RFI per Title 47 CFR, Part 18 for consumer limits when
operated at 120VAC, and non-consumer limits at 277VAC.
14
Reflector
20º
STEALTH WALL WASH REMODEL
Fixture Ordering
By following the steps below, you may specify a complete
STEALTH WALL WASH REMODEL fixture including housing,
electrical and trim insert in one complete number.
MR16
12V
MR16
METAL
HALIDE
STEALTH WALL WASH REMODEL FIXTURE
S1SR
LAMP QUANTITY / CONFIGURATION
S1S
One (1) Light Housing for Square Insert
WW
HOUSING CONSTRUCTION
R
Remodel
LAMP WATTAGE / TYPE
050M16
50 Watt max. MR16 12V
020C16
039C16
20 Watt MR16 Metal Halide
39 Watt MR16 Metal Halide
POWER SUPPLY
Electronic Transformer or Ballast
E
M
Magnetic Transformer (for 12V MR16 only)
T
Toroidal Transformer (for 12V MR16 only)
PRIMARY VOLTAGE
1
120 Volts
2
277 Volts
STEALTH WALL WASH REMODEL
NOTE: De-rated wattage labeling available. 12V primary voltage is available.
TRIM INSERT
WW
Die-Cast Trimless Regressed Wall Wash Insert
TRIM FINISH
B
Black Powder Coat
W
White Powder Coat
S
Industrial Silver Powder Coat
A
G
NOTE: Custom colors are available upon request. Consult factory for specifications.
B
C
E F
D
REMODEL - Dimensions
Config.
S1SR
S1S R 050M16 E 1 WW B
A
15.71”
B
14.25”
C
4.29”
D
4.29”
E
7.34”
F
9.50”
G
6.34”
Ordering Example
One (1) Light 12V 50 Watt MR16 STEALTH Wall Wash Remodel,
Electronic 12V Transformer 120V Primary, “WW” Die Cast Wall Wash Insert, Black Finish
15
RSA
7945 Orion Ave.
Van Nuys, CA 91406
P: 818-349-3030
F: 818-349-3031
Cooper Lighting, LLC.
Customer First Center
1121 Highway 74 South
Peachtree City, GA 30269
P: 770-486-4800
F: 770-486-4801
International Sales, USA
Cooper Lighting, LLC.
1121 Highway 74 South
Peachtree City, GA 30269
P: 770-486-4800
F: 770-486-4801
Canada
Cooper Lighting, LLC.
5925 McLaughlin Road
Mississauga, Ontario L5R 1B8
P: 905-507-4000
F: 905-568-7049
www.cooperlighting.com
Domestic Facilities
Cranbury, New Jersey
Elk Grove Village, Illinois
Irving, Texas
Ontario, California
Peachtree City, Georgia
Canadian Facilities
Calgary, Alberta T2E 7V9
Cooper Lighting is a valuable trademark of Cooper Industries in the United States and other countries.
You are not permitted to use the Cooper Trademarks without the prior written consent of Cooper Industries.
Cooper Industries, Ltd.
600 Travis, Ste. 5800
Houston, TX 77002-1001
P: 713-209-8400
www.cooperindustries.com
ASA082234
Printed in USA
The Cooper Lighting Family
Halo
Metalux
Lumark
Sure-Lites
Neo-Ray
Corelite
Portfolio
Iris
Shaper
io
Lumière
Invue
McGraw-Edison
Streetworks
Fail-Safe
MWS
DLS
RSA
Ametrix