Commercial CCS-32 Failsafe

advertisement
Commercial
CCS-32
High Power DC-12GHz SPDT Switch
Failsafe
The CCS-32 is a broadband, SPDT Switch designed to switch microwave signals
from a common input to either of two outputs. Designed for 50 Ohms transmission
lines. The switch is available with either failsafe or latching type actuators operating
on 28 VDC or other special DC voltages. The primary advantage of this switch over
the miniature versions, shown on previous pages is more connector options and
higher power handling capability.
Specifications
RF Contacts:
Break before make
Actuator
Voltage (VDC) 20O C
12
Current (mA)
625 500 250
Switching Time:
20 msec max
Connectors:
SMA, TNC, N Type
Weight:
6 oz. max
15
28
Temperature Range: -40O C to +65O C (Operating)
Shock:
MIL-STD-202 Method 213, Condition D (500G Non Operating)
Vibration:
MIL-STD-202 Method 214, Condition D (10G RMS Non Operating)
Humidity:
Moisture Seal Available
Typical Contact Life:
2 Million Cycles
RF Power Handling
3000
Typical Performance
Hig
Sta
nda
Power CW (Watts)
400
rd
Co
nne
NT
ype
cto
Co
rs
nne
200
Return Loss
800
hP
ow
er
cto
rs
15
80
25
40
10
0.1
1.0
4.0
Frequency GHz
10
18
0.01
26.5
Frequency GHz
*Connector Type
SMA
N Type
TNC
1.25:1
0.30 dB
70.0 dB
Max (f)
12 GHz
11.5 GHz
11 GHz
1.40:1
0.40 dB
60.0 dB
4-12 GHz*
1.70:1
0.50 dB
60.0 dB
0.4
60
IL dB
VSWR (max)
Insertion Loss (max)
Isolation (min)
DC-1 GHz 1-4 GHz
Isolation dB
0.0
Specifications
12.0
70
80
90
0.01
Specifications subject to change without notice.
Frequency GHz
12.0
www.teledynecoax.com
email: coax@teledyne.com
Tel: (800) 351-7368
10/2008
Commercial
CCS-32
High Power DC-12GHz SPDT Switch
Failsafe
Indicators
TTL
Analog
H = 1.70 MAX. STD MODEL
H = 2.30 MAX. TTL MODEL
H = 1.70 MAX. STD MODEL
H = 2.30 MAX. TTL MODEL
N Type Outline
TNC Outline
Part Numbering System for CCS-32 (Failsafe)
CCS-32 S 1 O - T
Series
Options
Connectors
Actuator Type
Actuator Voltage
Connector
N: N Type Female
T: TNC Female
Actuator Voltage
1: 28Vdc Failsafe
2: 15Vdc Failsafe
3: 12Vdc Failsafe
Actuator Type
O: No Indicator Contacts
C: Indicator Contacts
Options
T: TTL Drivers with Diodes
R: Positive + Common
For other options contact Factory
Specifications subject to change without notice.
www.teledynecoax.com
email: coax@teledyne.com
Tel: (800) 351-7368
10/2008
Download