Substrate Envelope-Designed Potent HIV-1 Protease
Inhibitors to Avoid Drug Resistance
The MIT Faculty has made this article openly available. Please share
how this access benefits you. Your story matters.
Citation
Nalam, Madhavi N.L., Akbar Ali, G.S. Kiran Kumar Reddy, Hong
Cao, Saima G. Anjum, Michael D. Altman, Nese Kurt Yilmaz,
Bruce Tidor, Tariq M. Rana, and Celia A. Schiffer. “Substrate
Envelope-Designed Potent HIV-1 Protease Inhibitors to Avoid
Drug Resistance.” Chemistry & Biology 20, no. 9 (September
2013): 1116–1124.
As Published
http://dx.doi.org/10.1016/j.chembiol.2013.07.014
Publisher
Elsevier
Version
Author's final manuscript
Accessed
Thu May 26 19:40:15 EDT 2016
Citable Link
http://hdl.handle.net/1721.1/101077
Terms of Use
Creative Commons Attribution-NonCommercial-NoDerivs
License
Detailed Terms
http://creativecommons.org/licenses/by-nc-nd/4.0/
NIH Public Access
Author Manuscript
Chem Biol. Author manuscript; available in PMC 2014 September 19.
NIH-PA Author Manuscript
Published in final edited form as:
Chem Biol. 2013 September 19; 20(9): 1116–1124. doi:10.1016/j.chembiol.2013.07.014.
Substrate Envelope Designed Potent HIV-1 Protease Inhibitors
to Avoid Drug Resistance
Madhavi N.L. Nalam1, Akbar Ali1, G.S. Kiran Kumar Reddy1, Hong Cao1, Saima G.
Anjum1,5, Michael D. Altman2,4, Nese Kurt Yilmaz1, Bruce Tidor2,*, Tariq M. Rana1,3,*, and
Celia A. Schiffer1,*
1Department of Biochemistry and Molecular Pharmacology, University of Massachusetts, Medical
School, Worcester, Massachusetts 01605, United States
2Department
of Biological Engineering, and Department of Electrical Engineering and Computer
Science, Massachusetts Institute of Technology, Cambridge, Massachusetts 02139, United
States
NIH-PA Author Manuscript
Summary
The rapid evolution of HIV under selective drug pressure has led to multi-drug resistant (MDR)
strains that evade standard therapies. We designed highly potent HIV-1 protease inhibitors (PIs)
using the substrate envelope model, which confines inhibitors within the consensus volume of
natural substrates, providing inhibitors less susceptible to resistance as a mutation impacting such
inhibitors will simultaneously affect viral substrate processing. The designed PIs share a common
chemical scaffold but utilize various moieties that optimally fill the substrate envelope, as
confirmed by crystal structures. The designed PIs retain robust binding to MDR protease variants,
and display exceptional antiviral potencies against different clades of HIV as well as a panel of 12
drug resistant viral strains. The substrate envelope model proves to be a powerful strategy to
develop potent and robust inhibitors that avoid drug resistance.
Introduction
NIH-PA Author Manuscript
Drug resistance is a major problem in the treatment of patients with HIV/AIDS. Resistance
in HIV occurs when the target enzyme mutates leading to less efficient drug binding, but
maintains biological function. Currently, there are 25 FDA approved drugs targeting
different stages in the life cycle of HIV, including 9 protease inhibitors (PIs). These drugs,
especially when used in combination in the highly active antiretroviral therapy (HAART),
have improved the quality and life expectancy of HIV-infected patients (Hogg, et al., 1998;
Palella, et al., 1998). However, the very high replication rate of the virus and the lack of an
error-proof mechanism in HIV reverse transcriptase promote the emergence of drug resistant
viral strains in patients undergoing therapy. New patients are also infected with already
© 2013 Elsevier Ltd. All rights reserved.
*
Corresponding Authors: Bruce Tidor: Phone: +1 (617) 253-7258, [email protected], Tariq M. Rana: Phone: +1 (858)795-5325,
[email protected], Celia A. Schiffer: Phone: +1 (508) 856-8008, [email protected]
3Current address: Program for RNA Biology, Sanford-Burnham Institute for Medical Research, 10901 North Torrey Pines Road, La
Jolla, California 92037, United States
4Current address: Merck Research Laboratories, 33 Avenue Louis Pasteur, Boston, Massachusetts 02115, United States
5Current address: Department of Biological Sciences, University of Massachusetts Boston, 100 Morrissey Blvd., Boston,
Massachusetts 02125, United States
Publisher's Disclaimer: This is a PDF file of an unedited manuscript that has been accepted for publication. As a service to our
customers we are providing this early version of the manuscript. The manuscript will undergo copyediting, typesetting, and review of
the resulting proof before it is published in its final citable form. Please note that during the production process errors may be
discovered which could affect the content, and all legal disclaimers that apply to the journal pertain.
Nalam et al.
Page 2
NIH-PA Author Manuscript
resistant viruses, which is an added challenge in the treatment of HIV infection. Thus novel
potent drugs targeting the drug-resistant viral ensemble are needed for effective treatment of
HIV/AIDS.
Various strategies have been used to develop new antiviral PI therapies against drug
resistant HIV, including increasing the plasma levels of existing PIs by using a boosting
agent (Kempf, et al., 1997; Youle, 2007; Zeldin and Petruschke, 2004) and developing new
PIs using structure-based drug design (Ghosh, et al., 2008; Gulnik and Eissenstat, 2008;
Nalam and Schiffer, 2008; Wensing, et al., 2010). The design strategy to maximize the
number of hydrogen bonds with the protease backbone led to the development of highly
potent PIs active against drug-resistant HIV (Ghosh, et al., 2011; Ghosh, et al., 2008; Ghosh,
et al., 2009). PIs with improved resistance profiles were also developed using a solvent
anchoring approach (Cihlar, et al., 2006), and utilizing a new lysine sulfonamide-based
molecular core (Stranix, et al., 2003). A more comprehensive strategy is to incorporate the
substrate envelope constraints in the structure-based drug design. This strategy is based on
the observation that substrates with high sequence diversity adopt a conserved shape when
bound to HIV-1 protease (Prabu-Jeyabalan, et al., 2002). The consensus volume shared by
the bound substrates defines the substrate envelope.
NIH-PA Author Manuscript
Drug resistance mutations often occur at sites where the inhibitor protrudes outside the
substrate envelope (King, et al., 2004). Similar observations have recently been
demonstrated to be valid for the HCV NS3/4A protease as well (Romano, et al., 2012;
Romano, et al., 2010), supporting the generality of the substrate envelope model. Inhibitors
designed to fit within this envelope are likely to be less susceptible to drug resistance, as a
mutation that impairs inhibitor binding will simultaneously affect substrate recognition and
protease function.
NIH-PA Author Manuscript
Previously, we designed and synthesized series of PIs with and without substrate envelope
constraints (Ali, et al., 2006; Ali, et al., 2010; Altman, et al., 2008; Chellappan, et al., 2007;
Nalam, et al., 2010; Nalam and Schiffer, 2008). These studies revealed that in contrast to
inhibitors designed without any constraint, inhibitors designed to fit within the substrate
envelope retain binding affinity to drug resistant HIV-1 protease variants, thereby having
flatter resistance profiles. A careful examination of Darunavir (DRV) binding to HIV-1
protease by free energy analysis suggested that the interactions in the S1′ and S2′ sites can
be improved by using more hydrophobic P1′ and P2′ groups to sustain van der Waals
contacts to variants with active site mutations (Cai and Schiffer, 2010). In previous
structure-activity relationship (SAR) studies of protease inhibitor libraries based on the (R)(hydroxyethylamino)sulfonamide dipeptide isostere, several high affinity moieties were
identified for the P2 and P2′ positions, including the bis-tetrahydrofurynyl (bis-THF) group
in DRV (Ghosh, et al., 1998). However, most of these studies had the isobutyl group at the
P1′ position. We have identified other P1′ ligands capable of more extensive van der Waals
contacts with the protease due to enhanced size and flexibility, while still staying within the
substrate envelope (Altman, et al., 2008; Nalam, et al., 2010). The challenge is combining
these moieties into a single inhibitor that retains extremely high potency and stays within the
volume of the substrate envelope.
We used the substrate envelope strategy to optimize PIs based on the DRV scaffold by
incorporating ligands at the P1′ and P2′ positions that fit within the substrate envelope and
therefore are predicted as promising candidates to be potent inhibitors of MDR HIV-1
protease variants. In this study, we report the structure-guided design and synthesis of a
series of such potent inhibitors and their subsequent structural, biochemical, antiviral and
pharmacokinetic evaluation. Two new chemical moieties at the P1′ position and five
chemical moieties at the P2′ position were incorporated to optimize inhibitor flexibility and
Chem Biol. Author manuscript; available in PMC 2014 September 19.
Nalam et al.
Page 3
NIH-PA Author Manuscript
interactions with the protease. The resulting 10 inhibitors (Fig. 1) were evaluated for their
inhibitory activity against wild-type (WT) and MDR HIV-1 protease variants, antiviral
activity against a panel of WT and patient-derived drug resistant HIV strains, and
pharmacokinetic properties. The new compounds retain high inhibitory activity against
MDR protease variants, display exceptional potency against a panel of twelve MDR strains
in antiviral assays, and overall perform better than the most potent FDA-approved inhibitor,
DRV. Crystal structures of complexes with WT HIV-1 protease reveal that the inhibitors
indeed fit within the substrate envelope as designed, and support the use of substrate
envelope constraints in the design of potent inhibitors evading resistance.
Results
Inhibitor Design and Synthesis
The design strategy for high affinity inhibitors against drug resistant HIV-1 protease variants
was based on three criteria: The inhibitors should (1) fit within the substrate envelope (2) be
based on the scaffold of a known high affinity inhibitor (3) have optimized P1′ and P2′
groups to retain contacts with the protease with drug resistance mutations.
NIH-PA Author Manuscript
NIH-PA Author Manuscript
The primary constraint in the design of inhibitors was proper fit within the substrate
envelope of HIV-1 protease. This approach aims to minimize susceptibility to resistance, as
a mutation that affects inhibitor binding will simultaneously affect substrate affinity (King,
et al., 2004). In accord with the second criterion, the design was based on the (R)(hydroxyethylamino)sulfonamide dipeptide isostere, the shared core scaffold of APV and
DRV. Finally, new chemical moieties were introduced at the P1′ and P2′ positions. As the
isobutyl P1′ moiety in DRV loses van der Waals contacts with the protease variants
containing drug resistance mutations I50V, V82A, and I84V (King, et al., 2004), two new
P1′ ligands, (S)-2-methylbutyl (isopentyl) and 2-ethyl-n-butyl (isohexyl), with enhanced
flexibility and steric volume were probed to enable sustained contacts with the protease.
Combination of these two P1′ ligands with five P2′ ligands that satisfy the substrate
envelope constraints yielded 10 new inhibitors (Fig. 1). The P2′ moieties were selected
based on the previous structure-activity studies in the DRV series and our computational
library designs, and include 4-aminobenzene, 4-methoxybenzene, 4(hydroxymethyl)benzene, 1,3-benzodioxolane, and benzothiazole (Altman, et al., 2008;
Ghosh, et al., 2008; Surleraux, et al., 2005; Surleraux, et al., 2005). The designed protease
inhibitors were prepared following the synthetic route illustrated in Figure 2. Briefly, ring
opening of chiral epoxide 1 with primary amines 2a-b provided the amino alcohols 3 and 4.
Reactions of sulfonyl chlorides 5a-e with 3 and 4 gave the intermediate (R)(hydroxyethylamino)sulfonamides 6–7. Boc deprotection followed by the reactions of the
free amines with bis-THF carbonate 9, prepared from chiral bis-THF alcohol 8, provided the
target compound series 10a-e and 11a-e.
The Designed Compounds Inhibit WT and Drug-Resistant Protease Variants
The enzyme inhibition constants (Ki values) of the designed inhibitors were determined
against WT and three drug resistant HIV-1 protease variants, along with all nine FDAapproved PIs (Fig. 3 and Table S2). Two MDR protease variants (M1: L10I/G48V/I54V/
L63P/V82A, M2: L10I/L63P/A71V/G73S/I84V/L90M) represent the pattern of resistance
mutations that occur under the selective pressure of three or more currently prescribed PIs in
HIV-1 infected patients (Wu, et al., 2003). The third variant (M3: I50V/A71V) is a signature
resistant variant of APV/DRV, which share the same scaffold used in the design of the ten
inhibitors.
Chem Biol. Author manuscript; available in PMC 2014 September 19.
Nalam et al.
Page 4
NIH-PA Author Manuscript
All designed inhibitors were highly potent in inhibiting enzyme activity with Ki values in the
0.2–30 pM range against WT protease. Five PIs had sub-pM Ki values (PIs 10c, 10d, 11b,
11c, 11d, Ki = 0.2–0.9 pM). Seven of the nine FDA approved drugs are 2-3 orders of
magnitude weaker inhibitors of WT protease (Ki = 46–284 pM), while two are low
picomolar binders (LPV and DRV, Ki = 5 pM). The precise measurements of Ki values in
the low pM range using standard biochemical assays are limited (Gulnik and Eissenstat,
2008; Kuzmi&Ccaron, 1996; Miller, et al., 2006). This makes direct comparison of new PIs
with DRV, and each other, challenging, as all have Ki values in the low pM range. With
those caveats, these novel PIs have Ki values against WT protease an order of magnitude
lower than the most potent FDA-approved drug DRV (Ki = 5 pM).
NIH-PA Author Manuscript
The novel PIs also retained potency against MDR variants of HIV-1 protease. The Ki values
for all PIs against the three MDR proteases (M1, M2 and M3) were in the pM range. Most
FDA-approved PIs lose significant potency against M1 and M2, except DRV and tipranavir
(TPV) (Fig. 3). All the new PIs retained potent activity against the M1 variant with Ki
values comparable to or lower than DRV (M1Ki = 25 pM), in particular three PIs (10b, 11b
and 11c) had Ki values lower than DRV. Similarly, most new PIs inhibited the M2 variant
with potency comparable to DRV. The M3 protease variant contains signature mutations of
DRV resistance (I50V, A71V). Compared to WT protease, M3 susceptibility to DRV was
50-fold decreased, with a Ki of 245 pM. In contrast, the designed inhibitors exhibited better
potency against M3, with Ki values consistently lower than that of DRV, and as low as 6 pM
for PIs 10a and 11d (Fig. 3). Thus, the new design strategy yielded highly potent PIs that
retain enzyme inhibition activity against multi-drug resistant variants of HIV-1 protease.
Overall, replacement of the P1′ isobutyl group of DRV with larger, more flexible isopentyl
and isohexyl groups resulted in improved inhibition of drug resistant protease variants. This
is evident from better potency of PIs 10a and 11a, which incorporate the same 4aminobenzene group at P2′ as DRV. The modifications at the P1′ position also proved to be
advantageous when combined with other groups at the P2′ position. In particular, PIs 10c
and 11c with the 4-(hydroxymethyl)benzene P2′ group were highly potent inhibitors of WT
protease and retained low pM activity against resistant variants. Thus incorporation of
optimized ligands that can retain interactions with drug resistance protease variants coupled
with the substrate envelope constraint proved to be a useful strategy for designing robust
inhibitors.
The Inhibitors Fit within the Substrate Envelope with Enhanced Protease Contacts
NIH-PA Author Manuscript
The crystal structures of the ten novel potent inhibitors were determined in complex with
WT HIV-1 protease. The crystals diffracted to 1.45–1.95 Å, yielding high-resolution
complex structures. The crystallographic and refinement statistics, as well as PDB IDs for
all the structures are listed in Table S1.
The co-crystal structures of all ten PIs in complex with the protease superimpose with each
other extremely well (Fig. 1b). The protease backbone is very similar in all the complexes,
with an RMSD of 0.11–0.16 Å for Cα atoms. Even the protease side chains, including those
in the active site, have similar conformations in all the crystal structures, except minor local
changes in side chain conformations surrounding the different P1′ and P2′ groups. These
tight-binding PIs “lock” into the active site and induce a tightly shared rigid protease
conformation with little variability.
Except for the chemically diverse P1′ and P2′ groups, the inhibitors superimpose very well
in all the crystal structures, and fit well within the substrate envelope (Fig. 1c). Despite
inherent flexibility, the P1′ isopentyl and isohexyl groups adopt the same conformation in all
the complexes, similar to the isobutyl group in DRV bound to protease (Fig. 4a). The key
Chem Biol. Author manuscript; available in PMC 2014 September 19.
Nalam et al.
Page 5
NIH-PA Author Manuscript
difference is the enhanced van der Waals contacts of the longer isopentyl (displayed for PI
10a in Fig. 4b) and isohexyl (displayed for PI 11a in Fig. 4c) groups within the S1′ pocket of
the protease active site, compared to those of the isobutyl group of DRV. The P1′ group
makes vdW interactions with the hydrophobic residues I50, P81, V82 and I84 in the active
site of the protease. With the exception of P81, these residues are key sites of multi- drug
resistance, and mutate to those with smaller side chains (Ile to Val, Val to Ala) to confer
resistance, such as in the case of I50V mutation in the DRV signature resistance variant M3.
The isopentyl and isohexyl groups in the novel PIs fill the S1′ pocket better compared to the
isobutyl group of DRV, and their flexibility makes them capable of adapting and forming
van der Waals contacts even with the mutated shorter side chain residues. These enhanced
contacts are consistent with retained affinities to drug resistant HIV protease variants with
mutations around the S1′ pocket (Fig. 3 and Table S2).
Improved Antiviral Activity against WT and Drug-Resistant HIV Strains
The new PIs were tested for antiviral activity against WT HIV from clades A, B and C, as
well as a diverse panel of 12 clinically relevant patient-derived drug resistant viruses using
PhenoSense™ HIV assays (Monogram Biosciences, San Francisco, CA), and compared
with DRV (Fig. 5 and Table S3, Fig. S1). The average EC50 values against all twelve viral
variants tested, and fold-changes in potency with respect to WT strain were used to evaluate
PI resistance profiles (Table S3).
NIH-PA Author Manuscript
All ten inhibitors exhibited sub-nanomolar potency against WT virus from three different
clades (EC50 = 0.04–0.4 nM). PIs 10b, 10d and 11b are more potent against WT clade B
virus compared to DRV (EC50 = 0.4 nM).
NIH-PA Author Manuscript
The novel PIs even retained antiviral potency against MDR strains, further validating the
enzymatic assays. The average EC50 values against 12 different drug resistant strains were
lower than DRV for all 10 PIs (Table S3 and Fig. 5). Overall, the new PIs were 1.5-4.5times more potent than DRV against drug resistant HIV strains tested. There was no
significant difference in the EC50 values of PIs with the isopentyl (10a-d) versus the
isohexyl (11a-d) group at the P1′ position. However, the P2′ phenylsulfonamide groups
appear to have more effect on the potency against drug resistant strains. Thus, consistent
with previous SAR results in the DRV series (Surleraux, et al., 2005), compounds with the
4-methoxybenzene (10b and 11b) and 1,3-benzodioxolane (10d and 11d) groups at P2′
position exhibited better potency than the corresponding 4-aminobenzene analogues 10a and
11a. However, in contrast to the corresponding DRV analogue (Ghosh, et al., 2008), PIs
with the 4-(hydroxymethyl)benzene P2′ group (10c and 11c) also exhibited highly potent
activity, likely due to the increased lipophilicity In a previous study, HIV PIs with cLogP
values in the 3.7–5.0 range exhibited better antiviral potencies against drug resistant HIV
variants than DRV (cLogP = 2.88) (Miller, et al., 2006). As the cLogP values of the new PIs
are all in the desired range (Table S4), the increased lipophilicities, in addition to other
factors, may be contributing to the improved antiviral potencies compared to DRV.
DRV retains low nM activity against most MDR strains, but loses significant potency
against two MDR strains with the I50 V protease mutation. However, a number of the new
analogues retain better potency against these MDR strains, particularly analogues 10b and
10d with the 4-methoxybenzene and 1,3-benzodioxolane groups at P2′ position. In fact,
compound 10b retains sub nM antiviral potency against 10 of the 12 MDR strains tested and
low nM potency against the strains with the I50V protease mutation, exhibiting the lowest
average EC50 of 1.33 nM compared to 5.98 nM for DRV. Thus, the combination of
isopentyl group at P1′ and 4-methoxybenzene group at P2′ provided the compound (10b)
with the best resistance profile.
Chem Biol. Author manuscript; available in PMC 2014 September 19.
Nalam et al.
Page 6
NIH-PA Author Manuscript
The excellent resistance profiles of the PIs indicate that the design strategy of filling the
subsites without violating the substrate envelope constraints was successful in optimizing
the inhibitor for robustness against resistance mutations.
In Vitro Pharmacokinetic Evaluation
The exciting PhenoSense™ resistance profile data prompted further evaluation of the new
PIs as potential drug candidates using in vitro pharmacokinetic assays. The aqueous
solubility, plasma protein binding, plasma stability, and microsomal stability in dog, rat, and
human liver microsomes of all new PIs were determined by Apredica (Watertown, MA)
using DRV as a control (Tables 1 and S4).
NIH-PA Author Manuscript
The oral bioavailability of a drug depends in part on water solubility and lipophilicity. The
latter is estimated by the calculated partition coefficient cLogP, which is optimized to
balance between aqueous solubility and transport through the hydrophobic cell membrane
(Miller, et al., 2006). Compounds with cLogP values in the 3.5–5.0 range have been
reported to have the best antiviral activity as HIV PIs (Miller, et al., 2006). The cLogP
values of the new PIs are all in the desired range (Table S4). In fact, they have higher
lipophilicities compared to DRV, which may enhance cell penetration. Despite the enhanced
lipophilicity, the PIs also have good aqueous solubility except the PIs 10b and 11b with the
methoxybenzene group in the P2′. Overall the increased lipophilicity and reasonable
aqueous solubility likely contribute to the improved antiviral activity profiles (EC50 values),
which depend on both the intrinsic binding affinity to the target (Ki), and the transport
efficiency into the cell.
The metabolic stability of PIs was evaluated by measuring the microsomal stability, plasma
stability and plasma protein binding (Tables 1 and S4). Assays were performed in rat and
human microsomes to determine the stability of PIs at 15, 30, and 60 min time points and in
the absence and presence of CYP-450 inhibitor ritonavir (RTV) (Table 1). Similar to DRV,
RTV boosting considerably enhances the microsomal stability for majority of the new PIs,
which are otherwise not stable in the presence of liver microsomes at 60 min. Interestingly,
two inhibitors with the benzothiazole P2′ moiety (10e and 11e) showed excellent stability in
both rat and human microsomal tests even without RTV boosting. Overall, the new PIs have
good pharmacokinetic properties, encouraging their further development as drug candidates.
Discussion
NIH-PA Author Manuscript
With the emergence of resistance, many drugs become obsolete in therapies against rapidly
evolving disease targets, such as in the case of HIV/AIDS. In HIV infection, error-prone
reverse-transcriptase and the high replication rates of the virus result in a diverse viral
population, among which drug-resistant viral strains are selected under the pressure of drug
therapy. To avoid spending time and resources in developing drugs that rapidly becomes
obsolete, strategies at the initial design stage need to be implemented to minimize the
chances of subsequent drug resistance.
The substrate envelope provides a framework for implementing drug resistance
considerations into structure-based drug design. For drug resistance to occur, the target
needs to be able to carry out its biological function while at the same time avoiding drug
binding. The chances of this happening are diminished if the designed drug binds the target
similarly to the natural substrates. Protrusions beyond the substrate envelope cause
vulnerable sites for drug resistance mutations (King, et al., 2004), as mutations into bulkier
side chains impact drug binding without affecting the substrates.
Chem Biol. Author manuscript; available in PMC 2014 September 19.
Nalam et al.
Page 7
NIH-PA Author Manuscript
The results presented here demonstrate that optimally filling the substrate envelope is key to
developing potent inhibitors. In cases where the designed drug occupies a smaller volume
than the substrates, mutations into shorter side chains may diminish van der Waals
interactions with the inhibitor, while still maintaining sufficient interactions with the larger
natural substrates. In the DRV signature resistant HIV-1 protease, the I50V mutation causes
loss of contacts with the P1′ isobutyl group. The new longer isopentyl and isohexyl moieties
introduced here to the P1′ site optimally fill the substrate envelope and have flexibility,
which enables sustaining van der Waals interactions even when resistant mutations occur.
Thus, the inhibitors have improved van der Waals contacts with the protease while still
staying within the substrate envelope, and retain potency against a wider variety of HIV-1
protease mutants.
NIH-PA Author Manuscript
The improved binding affinities of PIs against drug resistant protease variants correlate with
their exceptional antiviral potencies against a panel of twelve patient-derived drug resistant
HIV strains in PhenoSense™ HIV assays. The new PIs retain better antiviral potency against
MDR HIV variants less susceptible to DRV, with EC50 values in the low nM range.
However, MDR viruses insensitive to DRV are also relatively less sensitive to new PIs,
implying the same factors may render the inhibitors less effective in the antiviral assays. The
MDR viruses insensitive to DRV and the new PIs contain a combination of protease
secondary mutations outside the active site, which may interdependently confer resistance to
all these inhibitors. Such secondary mutations may alter the processivity of the protease to
favor substrate processing over inhibitor binding, thereby decreasing susceptibility to
inhibitors (Chang and Torbett, 2011; Muzammil, et al., 2003; Xie, et al., 1999). Thus, the
compensatory mutations outside the protease active site may also be contributing towards
the observed resistance profiles.
All ten inhibitor-protease complex structures superimpose extremely well with each other,
despite chemical diversity at the P1′ and P2′ sites of the inhibitors. The exceptionally high
affinity of the designed sub- and low-picomolar inhibitors may be locking the protease
structure, and not allowing much conformational variability. Future studies of proteaseinhibitor complex dynamics will provide insights into the effect of sub-picomolar binders on
the protease conformational and dynamic behavior.
In conclusion, in quickly evolving therapeutic targets, restricting inhibitors to fit within the
substrate envelope is a key filter in minimizing the susceptibility to drug resistance.
Significance
NIH-PA Author Manuscript
Overcoming resistance is crucial in designing robust drugs against HIV/AIDS. Resistance to
direct-acting antiviral drugs, including HIV-1 protease inhibitors, occurs when the target
mutates to avoid drug binding, while maintaining activity on substrates. Our design strategy
of optimizing inhibitor fit within the substrate envelope yielded high affinity inhibitors of
multi-drug resistant HIV protease variants, which exhibited improved antiviral potencies
than DRV against a large panel of drug resistant HIV strains. Some of these potent inhibitors
also have promising pharmacokinetic profiles, even in the absence of a boosting agent,
encouraging their potential development as drugs.
This study provides strong rationale for incorporating substrate envelope constraints in the
initial stages of drug design as a powerful strategy to design potent inhibitors that evade
resistance. Drug resistance extends well beyond HIV, thwarting the success of many drugs
to quickly evolving targets in pathogens and cancer. This strategy is broadly applicable to
the design of inhibitors against such quickly evolving disease targets, facilitating a more
rational and rapid selection of drug candidates that are robust and thus less susceptible to
resistance.
Chem Biol. Author manuscript; available in PMC 2014 September 19.
Nalam et al.
Page 8
Experimental Procedures
Protein Crystallography
NIH-PA Author Manuscript
The expression, isolation, and purification of wild-type and mutant HIV-1 proteases used for
crystallization and binding experiments were carried out as previously described.(King, et
al., 2002) Co-crystals of the inhibitors with the wild-type protease were grown at room
temperature by hanging drop vapor diffusion method. Protease concentration of 1.6 mg/ml
with 3-fold molar excess of inhibitors was used to set the crystallization drops with the
reservoir solution consisting of 126 mM phosphate buffer at pH 6.2, 63 mM sodium citrate
and 24-29% ammonium sulfate.
NIH-PA Author Manuscript
The crystals used for data collection were mounted in Mitegen Micromounts and flash
frozen over a nitrogen stream. Intensity data for complex structures of 10a, 10b, 10d, 10e,
11b, 11c and 11d were collected at -80°C on an in-house Rigaku X-ray generator equipped
with an R-axis IV image plate. 180 frames were collected per crystal with an angular
separation of 1° and no overlap between frames. The data processing of the frames was
carried out using the programs DENZO and ScalePack respectively.(Minor, 1993;
Otwinowski, et al., 1997) Intensity data for 10c, 22a and 11e were collected under cryogenic
conditions at BioCARS 14-BMC beamline at Argonne National Laboratory (Advanced
Photon Source, Chicago, IL). Diffraction images were indexed and scaled using the program
HKL2000.(Otwinowski, et al., 1997)
The crystal structures were solved and refined with the programs within the CCP4 interface.
Structure solutions for all the wild-type protease-inhibitor complexes were obtained with the
molecular replacement package AMoRe(Navaza, 1994) using 1F7A(Prabu-Jeyabalan, et al.,
2000) as the starting model. Upon obtaining solution, the molecular replacement phases
were further improved using ARP/wARP(Morris, et al., 2002) to build solvent molecules
into the unaccounted regions of electron density. Model building was performed using the
interactive graphics program Coot.(Emsley and Cowtan, 2004) Conjugate gradient
refinement using Refmac5(Murshudov, et al., 1997) was performed by incorporating
Schomaker and Trueblood tensor formulation of TLS (translation, libration, screw-rotation)
parameters.(Kuriyan and Weis, 1991; Schomaker and Trueblood, 1968; Tickle and Moss,
1999) The working R(Rfactor) and its cross validation (Rfree) were monitored throughout the
refinement. The data collection and refinement statistics are shown in Table S5.
Supplementary Material
Refer to Web version on PubMed Central for supplementary material.
NIH-PA Author Manuscript
Acknowledgments
This work was made possible by a grant from the National Institute of General Medical Sciences, National
Institutes of Health (P01-GM66524) and ARRA Supplement (P01GM066524-08S1). The authors would like to
thank Dr. Norton Peet and Prof. William Royer for helpful discussions, Rajintha Bandaranayake, Seema Mittal and
Keith Romano for collecting some of the data at BioCARS beamline of the Advanced Photon Source, Argonne
National Laboratory. Use of the Advanced Photon Source for x-ray data collection was supported by the U.S.
Department of Energy, Basic Energy Sciences, Office of Science, under Contract No. DE-AC02-06CH11357. Use
of the BioCARS Sector 14 was supported by the National Institutes of Health, National Center for Research
Resources, under grant number RR007707. We also thank Kaneka USA for generous gifts of chiral epoxides.
References
Collaborative Computational Project Number 4. The CCP4 suite: Programs for protein
crystallography. Acta Crystallogr. 1994; D50:760–763.
Chem Biol. Author manuscript; available in PMC 2014 September 19.
Nalam et al.
Page 9
NIH-PA Author Manuscript
NIH-PA Author Manuscript
NIH-PA Author Manuscript
The HIV-Causal Collaboration. The effect of combined antiretroviral therapy on the overall mortality
of HIV-infected individuals. AIDS. 2010; 24:123–137.
Stanford HIV Drug Resistance Database. [accessed on 02 July, 2013] http://hivdb.Stanford.edu
U.S. Food and Drug Administration. [accessed on 02 July, 2013] Antiretroviral drugs used in the
treatment of HIV infection. http://www.fda.gov/ForConsumers/ByAudience/ForPatientAdvocates/
HIVandAIDSActivities/ucm118915.htm
Ali A, Reddy GSKK, Cao H, Anjum SG, Nalam MNL, Schiffer CA, Rana TM. Discovery of HIV-1
protease inhibitors with picomolar affinities incorporating N-aryl-oxazolidinone-5-carboxamides as
novel P2 ligands. J Med Chem. 2006; 49:7342–7356.
Ali A, Reddy GSKK, Nalam MNL, Anjum SG, Cao H, Schiffer CA, Rana TM. Structure-based
design, synthesis, and structure–activity relationship studies of HIV-1 protease inhibitors
incorporating phenyloxazolidinones. J Med Chem. 2010; 53:7699–7708.
Altman MD, Ali A, Reddy GSKK, Nalam MNL, Anjum SG, Cao H, Chellappan S, Kairys V,
Fernandes MX, Gilson MK, et al. HIV-1 Protease inhibitors from inverse design in the substrate
envelope exhibit subnanomolar binding to drug-resistant variants. J Am Chem Soc. 2008;
130:6099–6113.
Cai Y, Schiffer C. Decomposing the energetic impact of drug resistant mutations in HIV-1 protease on
binding DRV. J Chem Theory Comput. 2010; 6:1358–1368.
Chang MW, Torbett BE. Accessory mutations maintain stability in drug-resistant HIV-1 protease. J
Mol Biol. 2011; 410:756–760. [PubMed: 21762813]
Chellappan S, Reddy GSKK, Ali A, Nalam MNL, Anjum SG, Cao H, Kairys V, Fernandes MX,
Altman MD, Tidor B, et al. Design of mutation-resistant HIV protease inhibitors with the substrate
envelope hypothesis. Chem Biol Drug Des. 2007; 69:298–313.
Cihlar T, He GX, Liu X, Chen JM, Hatada M, Swaminathan S, McDermott MJ, Yang ZY, Mulato AS,
Chen X, et al. Suppression of HIV-1 protease inhibitor resistance by phosphonate-mediated
solvent anchoring. J Mol Biol. 2006; 363:635–647.
Emsley P, Cowtan K. Coot: Model-building tools for molecular graphics. Acta Crystallogr. 2004;
D60:2126–2132.
Ghosh AK, Chapsal BD, Baldridge A, Steffey MP, Walters DE, Koh Y, Amano M, Mitsuya H. Design
and synthesis of potent HIV-1 protease inhibitors incorporating hexahydrofuropyranol-derived
high affinity P2 ligands: structure–activity studies and biological evaluation. J Med Chem. 2011;
54:622–634.
Ghosh AK, Chapsal BD, Weber IT, Mitsuya H. Design of HIV protease inhibitors targeting protein
backbone: an effective strategy for combating drug resistance. Acc Chem Res. 2008; 41:78–86.
Ghosh AK, Krishnan K, Walters DE, Cho W, Cho H, Koo Y, Trevino J, Holland L, Buthod J.
Structure based design: Novel spirocyclic ethers as nonpeptidal P2-ligands for HIV protease
inhibitors. Bioorg Med Chem Lett. 1998; 8:979–982.
Ghosh AK, Leshchenko-Yashchuk S, Anderson DD, Baldridge A, Noetzel M, Miller HB, Tie Y,
Wang YF, Koh Y, Weber IT, et al. Design of HIV-1 protease inhibitors with pyrrolidinones and
oxazolidinones as novel P1′-ligands to enhance backbone-binding interactions with protease:
synthesis, biological evaluation, and protein-ligand X-ray studies. J Med Chem. 2009; 52:3902–
3914.
Gulnik SV, Eissenstat M. Approaches to the design of HIV protease inhibitors with improved
resistance profiles. Curr. Opin. HIV AIDS. 2008; 3:633–641.
Hogg RS, Heath KV, Yip B, Craib KJP, O'Shaughnessy MV, Schechter MT, Montaner JSG. Improved
survival among HIV-infected individuals following initiation of antiretroviral therapy. JAMA.
1998; 279:450–454.
Kempf DJ, Marsh KC, Kumar G, Rodrigues AD, Denissen JF, McDonald E, Kukulka MJ, Hsu A,
Granneman GR, Baroldi PA, et al. Pharmacokinetic enhancement of inhibitors of the human
immunodeficiency virus protease by coadministration with ritonavir. Antimicrob Agents
Chemother. 1997; 41:654–660.
King NM, Melnick L, Prabu-Jeyabalan M, Nalivaika EA, Yang SS, Gao Y, Nie X, Zepp C, Heefner
DL, Schiffer CA. Lack of synergy for inhibitors targeting a multi-drug-resistant HIV-1 protease.
Protein Sci. 2002; 11:418–429.
Chem Biol. Author manuscript; available in PMC 2014 September 19.
Nalam et al.
Page 10
NIH-PA Author Manuscript
NIH-PA Author Manuscript
NIH-PA Author Manuscript
King NM, Prabu-Jeyabalan M, Nalivaika EA, Schiffer CA. Combating susceptibility to drug
resistance: lessons from HIV-1 protease. Chem Biol. 2004; 11:1333–1338.
King NM, Prabu-Jeyabalan M, Nalivaika EA, Wigerinck P, de Bethune MP, Schiffer CA. Structural
and thermodynamic basis for the binding of TMC114, a next-generation human immunodeficiency
virus type 1 protease inhibitor. J Virol. 2004; 78:12012–12021.
Kuriyan J, Weis WI. Rigid protein motion as a model for crystallographic temperature factors. Proc
Natl Acad Sci USA. 1991; 88:2773–2777.
Kuzmič P. Program DYNAFIT for the analysis of enzyme kinetic data: Application to HIV proteinase.
Anal Biochem. 1996; 237:260–273.
Miller JF, Andrews CW, Brieger M, Furfine ES, Hale MR, Hanlon MH, Hazen RJ, Kaldor I, McLean
EW, Reynolds D. Ultra-potent P1 modified arylsulfonamide HIV protease inhibitors: The
discovery of GW0385. Bioorg Med Chem Lett. 2006; 16:1788–1794.
Minor, W. XdisplayF. Purdue University West Lafayette, Indiana: 1993. Program
Morris RJ, Perrakis A, Lamzin VS. ARP/wARP's model-building algorithms. I. The main chain. Acta
Crystallogr. 2002; D58:968–975.
Murshudov GN, Vagin AA, Dodson EJ. Refinement of macromolecular structures by the maximumlikelihood method. Acta Crystallogr. 1997; D53:240–255.
Muzammil S, Ross P, Freire E. A major role for a set of non-active site mutations in the development
of HIV-1 protease drug resistance. Biochemistry. 2003; 42:631–638.
Nalam MNL, Ali A, Altman MD, Reddy GSKK, Chellappan S, Kairys V, Ozen A, Cao H, Gilson MK,
Tidor B, et al. Evaluating the substrate-envelope hypothesis: Structural analysis of novel HIV-1
protease inhibitors designed to be robust against drug resistance. J Virol. 2010; 84:5368–5378.
Nalam MNL, Schiffer CA. New approaches to HIV protease inhibitor drug design II: Testing the
substrate envelope hypothesis to avoid drug resistance and discover robust inhibitors. Curr Opin
HIV AIDS. 2008; 3:642–646.
Navaza J. AMoRe: An automated package for molecular replacement. Acta Crystallogr. 1994;
A50:157–163.
Otwinowski, Z.; Minor, W.; Carter, Charles W, Jr. Processing of X-ray diffraction data collected in
oscillation mode. In: Carter, CWT.; Sweet, RM., editors. Methods in Enzymology. Academic
Press; 1997. p. 307-326.
Palella FJ, Delaney KM, Moorman AC, Loveless MO, Fuhrer J, Satten GA, Aschman DJ, Holmberg
SD. The H.I.V.O.S.I. Declining morbidity and mortality among patients with advanced human
immunodeficiency virus infection. N Engl J Med. 1998; 338:853–860.
Prabu-Jeyabalan M, Nalivaika E, Schiffer CA. How does a symmetric dimer recognize an asymmetric
substrate? A substrate complex of HIV-1 protease. J Mol Biol. 2000; 301:1207–1220.
Prabu-Jeyabalan M, Nalivaika E, Schiffer CA. Substrate shape determines specificity of recognition
for HIV-1 protease: Analysis of crystal structures of six substrate complexes. Structure. 2002;
10:369–381.
Romano KP, Ali A, Aydin C, Soumana D, Özen A, Deveau LM, Silver C, Cao H, Newton A,
Petropoulos CJ, et al. The molecular basis of drug resistance against hepatitis C virus NS3/4A
protease inhibitors. PLoS Pathog. 2012; 8:e1002832.
Romano KP, Ali A, Royer WE, Schiffer CA. Drug resistance against HCV NS3/4A inhibitors is
defined by the balance of substrate recognition versus inhibitor binding. Proc Natl Acad Sci U S
A. 2010:20986–20991.
Schomaker V, Trueblood KN. On the rigid-body motion of molecules in crystals. Acta Crystallogr.
1968; B24:63–76.
Stranix BR, Sauve G, Bouzide A, Cote A, Sevigny G, Yelle J. Lysine sulfonamides as novel HIVprotease inhibitors: optimization of the Nepsilon-acyl-phenyl spacer. Bioorg Med Chem Lett.
2003; 13:4289–4292.
Surleraux DL, de Kock HA, Verschueren WG, Pille GM, Maes LJ, Peeters A, Vendeville S, De Meyer
S, Azijn H, Pauwels R, et al. Design of HIV-1 protease inhibitors active on multidrug-resistant
virus. J Med Chem. 2005; 48:1965–1973.
Chem Biol. Author manuscript; available in PMC 2014 September 19.
Nalam et al.
Page 11
NIH-PA Author Manuscript
Surleraux DL, Tahri A, Verschueren WG, Pille GM, de Kock HA, Jonckers TH, Peeters A, De Meyer
S, Azijn H, Pauwels R, et al. Discovery and selection of TMC114, a next generation HIV-1
protease inhibitor. J Med Chem. 2005; 48:1813–1822.
Tickle, IJ.; Moss, DS. IUCr99 Computing School. IUCr: London: 1999. Modeling rigid-body thermal
motion in macromolecular crystal structure refinement.
Wensing AM, van Maarseveen NM, Nijhuis M. Fifteen years of HIV protease inhibitors: Raising the
barrier to resistance. Antiviral Res. 2010; 85:59–74.
Wu TD, Schiffer CA, Gonzales MJ, Taylor J, Kantor R, Chou S, Israelski D, Zolopa AR, Fessel WJ,
Shafer RW. Mutation patterns and structural correlates in human immunodeficiency virus type 1
protease following different protease inhibitor treatments. J Virol. 2003; 77:4836–4847.
Xie D, Gulnik S, Gustchina E, Yu B, Shao W, Qoronfleh W, Nathan A, Erickson JW. Drug resistance
mutations can affect dimer stability of HIV-1 protease at neutral pH. Protein Sci. 1999; 8:1702–
1707.
Youle M. Overview of boosted protease inhibitors in treatment-experienced HIV-infected patients. J
Antimicrob Chemother. 2007; 60:1195–1205.
Zeldin RK, Petruschke RA. Pharmacological and therapeutic properties of ritonavir-boosted protease
inhibitor therapy in HIV-infected patients. J Antimicrob Chemother. 2004; 53:4–9.
NIH-PA Author Manuscript
NIH-PA Author Manuscript
Chem Biol. Author manuscript; available in PMC 2014 September 19.
Nalam et al.
Page 12
Highlights
NIH-PA Author Manuscript
•
Design of HIV-1 protease inhibitors (PIs) using the substrate envelope model.
•
Crystal structures show PIs chemical moieties fill the substrate envelope
•
PIs display exceptional enzymatic and antiviral potency to drug resistant HIV
•
The design strategy is applicable to other quickly evolving disease targets.
NIH-PA Author Manuscript
NIH-PA Author Manuscript
Chem Biol. Author manuscript; available in PMC 2014 September 19.
Nalam et al.
Page 13
NIH-PA Author Manuscript
NIH-PA Author Manuscript
Figure 1.
Structure of the designed protease inhibitors. (a) The chemical scaffold, and P1′ and P2′
groups of the 10 inhibitors. (b) Superimposed x-ray crystal structures of all 10 inhibitors in
complex with WT HIV-1 protease. See Table S1 for crystallographic statistics. (c) Fit of
inhibitors within the substrate envelope. The substrate envelope is in blue space filling
representation, and the superimposed inhibitors are displayed as sticks. Protrusions beyond
the substrate envelope are in red.
NIH-PA Author Manuscript
Chem Biol. Author manuscript; available in PMC 2014 September 19.
Nalam et al.
Page 14
NIH-PA Author Manuscript
Figure 2.
NIH-PA Author Manuscript
Synthesis of protease inhibitors. Reagents and Conditions: (a) R1NH2, EtOH, 80 °C, 3 h; (b)
aq. Na2CO3, CH2Cl2, 0 °C to rt, overnight; (c) CH2Cl2, Et3N, 0 °C to rt, overnight; (d)
NaBH4, MeOH, 0 °C, 15 min; (e) TFA, CH2Cl2, 1 h; (f) Py, p-NO2-PhOCOCl, 0 °C to rt, 24
h; (g) DIEA, CH3CN, 0 °C to rt, 24 h; (h) SnCl2.2H2O, EtOAc, 70 °C, 3 h. See
Supplemental experimental procedures for more details.
NIH-PA Author Manuscript
Chem Biol. Author manuscript; available in PMC 2014 September 19.
Nalam et al.
Page 15
NIH-PA Author Manuscript
Figure 3.
NIH-PA Author Manuscript
Binding affinities of FDA-approved drugs and the 10 designed protease inhibitors to WT
and drug resistant variants of HIV-1 protease; the Ki values for the FDA-approved drugs are
from Nalam et al.(Nalam, et al., 2010) Inhibitory activity was determined by a FRET-based
enzymatic assay; Ki values are the average of at least three independent measurements. See
also Table S2.
NIH-PA Author Manuscript
Chem Biol. Author manuscript; available in PMC 2014 September 19.
Nalam et al.
Page 16
NIH-PA Author Manuscript
NIH-PA Author Manuscript
Figure 4.
Comparison of van der Waals contacts with the protease for P1′ groups in PIs. (a)
Superposition of DRV, PI 10a and PI 11a structures bound to WT HIV-1 protease. (b)
Isobutyl P1′ group in DRV (c) Isopentyl P1′ group in PI 10a (d) Isohexyl P1′ group in PI
11a. The longer P1′ groups make enhanced van der Waals contacts with the protease.
NIH-PA Author Manuscript
Chem Biol. Author manuscript; available in PMC 2014 September 19.
Nalam et al.
Page 17
NIH-PA Author Manuscript
NIH-PA Author Manuscript
Figure 5.
Resistance profile of DRV and the 10 PIs designed. Antiviral potencies (EC50 values) were
obtained for wild-type HIV from clades A, B and C, and 12 different patient-derived drugresistant variants of the virus. The PhenoSense™ HIV assays were performed by Monogram
Biosciences. See also Table S3 and Figure S1.
NIH-PA Author Manuscript
Chem Biol. Author manuscript; available in PMC 2014 September 19.
NIH-PA Author Manuscript
NIH-PA Author Manuscript
Chem Biol. Author manuscript; available in PMC 2014 September 19.
11e
11d
11c
11b
11a
10e
10d
10c
10b
10a
Compound
96
100
−
+
55
+
0
−
0
64
+
−
0
75
−
+
87
50
−
+
86
+
32
+
9
80
+
−
0
93
−
+
79
0
−
+
81
42
Human
62
84
21
0
79
0
50
18
30
13
71
64
0
0
45
0
0
0
51
24
Rat
at 30 Minutes
+
−
RTV
95
83
46
0
69
0
66
0
71
26
62
33
60
4
89
0
68
0
66
19
Human
44
87
4
0
57
0
20
19
11
2
74
31
0
0
22
0
0
0
35
9
Rat
at 60 Minutes
Microsomal Stability (Avg. % Fraction Remaining)
3
7
46
617
26
829
23
844
16
69
21
82
24
232
8
590
19
776
21
81
Human
44
9
156
712
27
907
74
150
117
204
20
53
771
987
79
664
518
885
67
129
Rat
Microsomal CLint (μL min-1 mg1)
Microsomal stability profile of protease inhibitors, related to Table S4.
>180
>180
45
3
81
3
90
2
126
30
99
25
85
9
>180
4
110
3
99
26
Human
48
>180
13
3
78
2
28
14
18
10
106
40
3
2
26
3
4
2
31
16
Rat
Microsomal T1/2 (min)
NIH-PA Author Manuscript
Table 1
Nalam et al.
Page 18
+
−
100
37
Human
84
40
Rat
at 30 Minutes
100
13
Human
65
23
Rat
at 60 Minutes
RTV: ritonavir; CLint: microsomal intrinsic clearance; T1/2: half-life
DRV
RTV
NIH-PA Author Manuscript
Compound
0
101
Human
20
83
Rat
Microsomal CLint (μL min-1 mg1)
>180
21
Human
103
25
Rat
Microsomal T1/2 (min)
NIH-PA Author Manuscript
Microsomal Stability (Avg. % Fraction Remaining)
Nalam et al.
Page 19
NIH-PA Author Manuscript
Chem Biol. Author manuscript; available in PMC 2014 September 19.
Download

Substrate Envelope-Designed Potent HIV-1 Protease Inhibitors to Avoid Drug Resistance Please share