For ConTech Lighting Ceiling Mount Cylinder Fixtures: CM6C, CM8C, CF6C, CF8C, CI6C, CI8C
CEILING MOUNT
INSTALLATION INSTRUCTIONS
Cylinder Lid
1. Detach the cylinder lid from the fixture by twisting
the lid counter-clockwise and pull it up. Figure 1.
2. Install the lid to the junction box with included
screws. Figure 2.
3. Connect the cylinder wires and the input power
wires from the junction box (Black to Black, White
to White, Green to Green) with included wire nuts.
Figure 2.
4. Attach the cylinder to the lid by twisting the cylinder
counter-clockwise until hearing a locking noise.
5. Attach the reflector by aligning the screws next to
the socket with the key-hole slots on the reflector.
Turn the reflector so that the screws slide over the
narrow portion of the key-hole slots. Tighten the
screws with a Philips head screwdriver. Figure 3.
6. For baffle assembly, push the baffle into the
reflector for a tight fit.
7. Insert the appropriate wattage lamp per the UL
relamping label.
Turn lid counter-clockwise,
pull up to detach
IMPORTANT SAFETY INSTRUCTIONS:
Read all the instructions before installation. Save the
instructions for later use.
 Turn off the power at the fuse or circuit breaker box
before installation or any maintenance work.
 Wear rubber-soled shoes and work on a sturdy
wooden or other nonconductive ladder.
 Fixtures must be installed according to national
electrical code and local building codes. For indoor
use only.
 To avoid a hazard to any children, account for all
parts and destroy all packing materials.
 Do not install any fixtures closer than 6” from any
curtain or similar combustible material.
 Warning: Risk of fire. Most dwellings built before
1985 have supply wire rated at 60°C. Consult a
qualified electrican before installation.
 Call the Technical Support department at ConTech
Lighting if you have any installation questions.
800.728.0312
Install Cylinder lid
to junction box

Safety Chain
Connect cylinder wires to
power supply wires
Keyhole Slots
Philips Head Screws
Socket
View of Socket
1-800-728-0312
www.contechlighting.com
All specifications subject to change without notice.
CM_INST