ENVISION
LOW VOLTAGE TRIMLESS DOWNLIGHTS
ENVISION
LOW VOLTAGE TRIMLESS DOWNLIGHTS
4-5/8"
7-3/4"
5-5/16"
5-5/16"
Ceiling Opening: 5-1/2"
Max. Ceiling Thickness: 2"
12-1/2"
17"
RS4175-SA
new construction
3"
I.D.
RS4150-ICSA
insulated ceiling
4"
O.D.
4"
O.D.
CST402V-P-(CLR, PL, WHT)
Adjustable Multiplier, White Trim, Clear,
Platinum or White Reflector. 15° Angle
adjustment with lockable aiming.
CST403V-P
3"
I.D.
1-1/3" x 1-3/4"
Oblong Slot
CST404V-P-(CLR, PL)
Angled Cone, Clear or Platinum Reflector,
White Trim. 30° Angle adjustment with
lockable aiming. 50mm lens.
Slotted Wall Wash, White Trim. Slot aperture
permits maximum beam area adjustment for
either wall wash or concealed accent lighting
effects. 45° Angle adjustment with precision,
gear driven, hot aiming. Black interior surface.
4"
O.D.
4"
O.D.
CST405V-P
4"
O.D.
2" Aperture
CST413V-P
Adjustable Pin Spot, Black Cut-Off Reflector,
White Trim. 45° Angle adjustment with
precision, gear driven, hot aiming.
2" Aperture
Wall Wash Trim, White Trim Ring, Black
Angled Vertical Ring. Linear Spread Lens
and internal Kicker Reflector.
ConTech Lighting’s Envision Flangeless Recessed fixtures have a very low
profile - almost invisible against the ceiling. The zero sight line trims are flush
with the ceiling, creating a smooth finish without visual distractions.
Ring Adjustment Knob
Rotational Adjustment Ring
These trimless, low voltage downlights are available in two StopAire ®
models: for insulated ceilings (12V 50W MR16) or non-insulated, new
construction applications (12V 75W MR16). Both housings are for drywall
ceilings and include perforated wings to ensure a secure fit in ceilings from
1/2" up to 2" thick. Dual extension hanger bars span from 14" - 25-1/4".
Each housing has an internal adjustment ring with 360° horizontal adjustability and locking mechanism for secure trim position.
Housing
Five trim options are available, all suitable for damp locations: adjustable
multiplier, adjustable slot aperture, adjustable angled cone reflector, wall
wash, and adjustable pinhole. Trims feature precision, gear driven aiming
and hot aiming/lamp adjustment can be done with a standard Philips screwdriver. Trim options suit the needs of performance, adjustability and décor.
All specifications subject to change without notice.
Mud Ring
Trim
Copyright Conservation Technology of Illinois, LLC ©2016
Mudding Compound
LITENV