RL38-ICS
Catalog No.
6" Incandescent
StopAire® Insulated Ceiling
Sloped Ceiling Recessed Downlight
Type
Project
Specifications/Features
Housing/Mounting
Designed for residential and commercial sloped ceilings for direct
contact with ceiling insulation in all ceiling construction.
Suitable for installation in 9 - 27 degree angle (2/12 to 6/12 pitch)
existing sloped ceilings. The elliptical aperture matches the ceiling
slope. Template supplied for elliptical hole.
Will work in ceiling thickness from 1/2" - 1-1/2". Adjustable bar
hanger: 14-1/4" > 24-1/2".
Conforms to Washington State Energy Code (WSEC) for low air
infiltration.
Lamp/Electrical
(1) 75W PAR38 or (1) 75W BR40 lamp (max).
Adjustable socket allows proper lamp position.
Pre-wired junction box with convenient screwdriver pry-outs:
(4) 1/2", (1) 1/2" and 3/4" concentric, (4) Romex pry-outs with UL
listed cable grips.
Spring-latch access plate.
Approved for through-branch wiring. Maximum (8) #12 AWG wires
(4-in/4-out).
7-1/2"
9-3/4"
7-1/4"
Trims
Many different trims options are available to complement any design
style. See “Trims for 6" Incandescent Sloped Ceiling Recessed
Housings” spec sheet for trim options and details.
12"
7-5/8"
Warranty
This fixture is covered by ConTech’s full one year replacement
guarantee after date of purchase.
Elliptical Ceiling Opening: 7-1/16" x 6-7/8"
Listing
cULus listed. Suitable for damp locations.
Ordering Information
Example Order:
Housing
RL38A-ICS
CTR1331-P
H B-24
Trims
Options
See “Trims for 6" Incandescent Sloped Ceiling
Recessed Housings” Spec Sheet for Trim Information
and Details
CTR64C-CLR
CTR618
HB-24
HBC-24
HB-30
RL-KIT
RL-725-(B,P)
RL38A-ICS
RL38A-ICS
RL-75-(B,P)
RL-08-(B,P)
1-847-559-5500
www.contechlighting.com
Please
Recycle
-
6" Trim Cross-Hair Louver Insert
6" Round Line Voltage Adapter Plate
27" Flat Hanger Bar Set
25" C-Channel Hanger Bar Set
30" T-Bar Hanger Set
Commercial Mounting Brackets
Minimum Trim Ring for 6" Trim,
7-1/4" O.D.
- Replacement Trim Ring for 6" Trim,
7-1/2" O.D.
- Oversized Trim Ring for 6" Trim,
7-13/16" O.D.
All specifications subject to change without notice.
Trims for 6"
Sloped Ceiling Incandescent
Recessed Housing
Catalog No.
Type
Project
All trims are compatable with 6 Inch Incandescent Sloped Ceiling Recessed Housings: RL38A and RL38A-ICS.
All trims have white trim finish unless specified.
All trims are cULus listed.
All trims are suitable for damp locations; only shower trims are listed for wet locations.
5-1/4"
I.D.
7-1/8"
O.D.
CTR1331-P
Black Aluminum Baffle, Regressed Glass Convex
Prismatic Lens
CTR1331-P-WHT
White Aluminum Baffle, Regressed Glass Convex
Prismatic Lens
Softened illumination for indoor and outdoor installations.
Adjustable to accommodate different ceiling thicknesses.
Wet location listed. Glass fresnel lens accessory available:
1331 LENS.
5"
I.D.
5-1/4" - 5-1/8" I. D.
Albalite Shower Trim
Wet location listed. White beveled steel trim ring.
Polyethylene sponge gaskets. Flat opal Albalite glass. (2)
Butterfly spring clips. Heat-treated steel. ETL listed for
use with four other housing manufacturers.
Max. Lamp:
RL38A: 60W A19
RL38A-ICS: 40W A19
CTR3801SC-P
Black Baffle Trim
CTR3801SC-WHT
White Baffle Trim
Fabricated of one piece of aluminum. (3) Leaf reflector
clips, spring steel, heat-treated, black oxidation plated.
White flat plastic trim ring supplied.
Max. Lamp:
RL38A: 120W R40, 90W PAR38
RL38A-ICS: 90W PAR38
5"
I.D.
7-1/8"
O.D.
7-7/8"
O.D.
CTR1912-P
Max. Lamp:
RL38A: 60W A19
RL38A-ICS: 50W PAR30, 40W A19
5-1/4"
I.D.
8-1/8"
O.D.
8-1/8"
O.D.
CTR1913-P
Fresnel Shower Trim
CTR1332-P-CLR
Wet location listed. White beveled steel trim ring.
Polyethylene sponge gaskets. Flat, clear Fresnel glass
lens. (2) Butterfly spring clips. Heat-treated steel. ETL
listed for use with four other housing manufacturers.
CTR1332-P-WHT
Max. Lamp:
RL38A: 60W A19
RL38A-ICS: 40W A19
Clear Polished Specular Multiplier, Regressed
Convex Prismatic Glass Lens
White Multiplier, Regressed Convex Prismatic
Glass Lens
7-7/8"
O.D.
CTR3802SC-CLR
5-1/4" - 5-1/8" I. D.
Clear Multiplier Trim
Fabricated of one piece of aluminum. (3) Leaf reflector
clips, spring steel, heat-treated, black oxidation plated.
White flat plastic trim ring supplied.
Softened illumination for indoor and outdoor installations.
Adjustable to accommodate different ceiling thicknesses.
Lexan fresnel lens accessory available: 1332 LENS.
5"
I.D.
Max. Lamp:
RL38A: 60W A19
RL38A-ICS: 50W PAR30, 40W A19
7-7/8"
O.D.
Max. Lamp:
RL38A: 120W R40, 90W PAR38
RL38A-ICS: 90W PAR38
CTR1916-P
8-1/8"
O.D.
CTR1903-P
2-1/2" x 4-3/4"
Aperture
Drop Opal Shower Light, Glass Lens, White
Beveled Steel Trim, 1" Drop from Ceiling
CTR1916-PP
Drop Opal Shower Light, Plastic Lens, White High
Heat ABS Trim, 1-1/2" Drop from Ceiling
White beveled steel trim ring. Polythylene sponge gaskets.
(2) Butterfly spring clips. All steel construction.
Wet location listed. Polyethylene sponge gaskets. Flat,
clear Fresnel glass lens. (2) Butterfly spring clips.
Heat-treated steel. ETL listed for use with four other
housing manufacturers.
Max. Lamp:
RL38A: 60W A19
RL38A-ICS: 40W A19
Max. Lamp:
RL38A: 60W A19
RL38A-ICS: 40W A19
Scoop Wall Wash
Reflector Finish Options:
CLR - Clear
1-847-559-5500
WHT -
White
4"
I.D.
8"
O.D.
CTR3008-(B, P)
Eyeball Trim
35° Vertical adjustment. Beveled steel trim ring.
Polythylene sponge gaskets. (2) Butterfly spring clips.
Heat-treated steel. ETL Listed for use with four other
housing manufacturers. Steel eyeball construction.
Max. Lamp: 75W PAR30/R30, 65W BR30
Trim Finish Options:
B
P
www.contechlighting.com
- Black
- White
PP - White Plastic
Please
Recycle
All specifications subject to change without notice.