RS4175-SA
Envision Series
4" Low Voltage Trimless Downlight
StopAire® Rated for Non-Insulated Ceilings
Catalog No.
Type
Project
Specifications/Features
Housing/Mounting
Clean, zero sight line fixture; trims disappear in the ceiling.
For non-insulated, new construction applications.
Used in drywall ceiling applications only.
Internal adjustment ring with 360° horizontal adjustability with locking
mechanism for secure trim position.
Two mudrings for 1/2" - 2" ceiling thickness.
Dual extension hanger bars span from 14" - 25-1/4".
Perforated wings provide a secure fit to drywall ceilings.
Lamp/Electrical
(1) 12V 75W MR16 (max.), GU5.3 Base. Lamp sold separately.
Thermally protected Magnetic Class H Transformer is prewired: 120V in/
12V out.
Junction box has (5) 1/2" knock-outs and (2) 1/2" - 3/4" concentric
knock-outs with spring latch access plate.
Approved for through branch wiring; maximum (8) 12 AWG.
Low voltage, magnetic dimming controls can be used.
4-5/8"
Trims
Envision “Trimless” trims suit the needs of performance, adjustability and
décor. See “Trims for Envision Housings” specification sheet.
On trims designed for use with MR16 lamps, Con-Tech Lighting provides a
clear, tempered safety glass. This safety glass should only be used with
open MR16 lamps, and not used with MR16 lamps that contain an integral
glass lens.
5-5/16"
9-1/2"
13"
Warranty
This fixture is covered by Con-Tech’s full one (1) year replacement
guarantee after date of purchase.
Apeture: 4-1/8"
Ceiling Opening: 5-1/2"
Max. Ceiling Thickness: 2"
Labels/Usage
cULus listed.
StopAire® product conforms to Washington State Energy Code (WSEC) for
low air infiltration. Tested in accordance with ASTM-E283 (2.0 cfm or less).
Damp location listed.
Ordering Information
Example Order:
RS4175-SA
Housing
CST402V-P-CLR
Trims*
RS4175-SA
RS4175-SA
CST402V-P-CLR
CST402V-P-PL
CST402V-P-WHT
CST403V-P
CST404V-P-CLR
CST404V-P-PL
CST405V-P
-
Trimless Adjustable Multiplier, Clear Reflector
Trimless Adjustable Multiplier, Platinum Reflector
Trimless Adjustable Multiplier, White Reflector
Trimless Adjustable Slot Aperture
Trimless Adjustable Angled Cone, Clear Reflector
Trimless Adjustable Angled Cone, Platinum Reflector
Trimless Adjustable Pinhole
*See “Trims for Envision Housings” specification sheet for trim details
1-847-559-5500
www.con-techlighting.com
Please
Recycle
All specifications subject to change without notice.
4" Trims for Envision Series
Trimless Downlights
Catalog No.
Type
Project
Specifications/Features
• All trims are compatable with RS41 Series 4 Inch Envision Trimless Downlight Recessed Housings.
• On recessed trims designed for use with MR16 lamps, Con-Tech Lighting provides a clear, tempered safety glass. This safety glass should
only be used with open MR16 lamps, and not used with MR16 lamps that contain an integral glass lens. If use of MR16 with front glass is
required, remove the factory provided clear tempered safety lens.
• All trims have white trim finish unless specified.
• All trims are cULus listed and suitable for damp locations; only shower trims are listed for wet locations.
4"
O.D.
3"
I.D.
4"
O.D.
3"
I.D.
4"
O.D.
1-1/3" x 1-3/4"
Oblong Slot
CST402V-P-CLR
Trimless Adjustable Multiplier, Clear Reflector
CST402V-P-PL
Trimless Adjustable Multiplier, Platinum Reflector
CST402V-P-WHT
Trimless Adjustable Multiplier, White Reflector
CST403V-P
CST404V-P-CLR
Trimless Adjustable Slot Aperture
Trimless Adjustable Angled Cone, Clear Reflector
Slotted Wall Wash, White Trim. Slot aperture permits
maximum beam area adjustment for either wall wash or
concealed accent lighting effects. 45° Angle adjustment
with precision, gear driven, hot aiming. Black interior
surface, 50mm lens.
CST404V-P-PL
Trimless Adjustable Angled Cone, Platinum Reflector
Angled Cone, Platinum Reflector, White Trim. 30° Angle
adjustment with lockable aiming. 50mm lens.
Adjustable Multiplier, White Trim, Clear Reflector. 15°
Angle adjustment with lockable aiming. 50mm lens.
4"
O.D.
4"
O.D.
2" Aperture
CST405V-P
CST413V-P
Trimless Adjustable Pinhole
Trimless Wall Wash
Adjustable Pin Spot, Black Cut-Off Reflector, White Trim.
45° Angle adjustment with precision, gear driven, hot
aiming. 50mm lens.
1-847-559-5500
2" Aperture
White Trim Ring, Black Angled Vertical Ring. Linear
Spread Lens and internal Kicker Reflector. 50mm lens.
www.contechlighting.com
Please
Recycle
All specifications subject to change without notice.
Download

RS4175-SA Envision Series 4" Low Voltage Trimless Downlight StopAire