RA316E 3" Ceramic Metal Halide Recessed Downlight with Electronic Ballast Specifications/Features Catalog No. Type Project Housing/Mounting Architectural grade 3" housing, 3-1/2" aperture size. 3-7/8" Ceiling opening, allow minimum 3" clearance around fixture from insulation material in insulated ceilings. “Sure grip” spring permits housing to be lowered and adjust to ceiling thickness varying ceiling thicknesses (1" max.). Lamp housing is removable through ceiling aperture for access to junction box. Commercial mounting kit (RL-KIT) provided for all types of suspended ceilings. Includes butterfly slots for C-channel mounting brackets (HBC-24) and vertical slots for flat hanger bar set (HB-24). Provides up to 5" of vertical adjustment and variable settings with choice of slots. Hanger bars not included. Lamp/Electrical (1) 20W or 39W Ceramic Metal Halide MR16, GX10 base. Aluminum heat sink prevents lamp overheating. Electronic Ballast: 120V or 277V for 50/60Hz operation Extends lamp life up to 20% longer than magnetic ballasts. Constant power design adjusts to line and lamp voltage fluctuations, reducing lamp color variations and providing good color rendition. 20W CMH: 24W Input. [email protected], [email protected] 39W CMH: 44W Input. [email protected], [email protected] Sound rating A, Harmonic Distortion < 15% End-of-life circuit and thermal protection for maximum safety. Junction box has (3) 1/2" pryouts, (2) 1/2" & 3/4" concentric pryouts, and (4) Romex pryouts with spring latch access plates. 6" 5-7/8" 10-3/4" Ceiling Opening: 3-7/8" Max. Ceiling Thickness: 1" Trims Many different trims options are available to complement any design style. See “Trims for 3" CMH MR16 Recessed Housings” spec sheet for trim selection and ordering information. Warranty This fixture is covered by Con-Tech’s full one (1) year replacement guarantee after date of purchase. Electronic ballasts have a five (5) year manufacturer’s warranty. Listing cULus listed. Suitable for damp locations. Ordering Information Example Order: RA316E20M H CTR306M H-P HBC-24 Options Housing Voltage Trims RA316E20MH - 20W RA316E39MH - 39W 120V - Standard Leave blank 27 - 277V For Trim Options, see “Trims for 3" CMH MR16 Recessed Housings” spec sheet for trim information and details. 1-847-559-5500 www.con-techlighting.com Please Recycle HB-24 - Flat hanger set for use with RL-KIT. Length: 27" HBC-24 - C-channel hanger bar set for use with RL-KIT in grid ceiling construction. Length: 25" CP - Chicago Plenum (Consult Factory) All specifications subject to change without notice. Trims for 3" MR16 CMH Recessed Housings Catalog No. Type Specifications/Features Project All trims have white trim finish unless specified. All trims are compatable with 3 Inch Ceramic Metal Halide MR16 Recessed Housings: RA316E20MH and RA316E39MH. Maximum lamp rating for most trim options: 39W Ceramic Metal Halide MR16 lamp, unless noted. All trims are cULus listed and suitable for damp locations; only shower trims are listed for wet locations. On recessed trims designed for use with MR16 lamps, ConTech Lighting provides a clear, tempered safety glass. This safety glass should only be used with open MR16 lamps, and not used with MR16 lamps that contain an integral glass lens. If use of MR16 with front glass is required, remove the factory provided clear tempered safety lens. 2-7/8" I.D. 4-1/4" O.D. CTR301MH-P Adjustable Multiplier with White Trim Ring; Select Reflector Finish CTR301MH-WHT Adjustable White Baffle 15° Vertical swing, will accept (1) 45mm lens. 2-7/8" I.D. 37° Vertical adjustment, will accept (1) 45mm lens. 4-1/4" O.D. Surface Adjustable Black Baffle 40° Vertical adjustment, 359° horizontal rotation. Regressed black baffle reduces surface brightness. Exclusive flat, stainless mounting clips hold trim firmly to ceiling. 2-7/8" I.D. 4-1/4" O.D. 4-1/4" O.D. CTR302MH-P-(BLK, PL, WHT) Adjustable Black Baffle CTR306MH-P 2-7/8" I.D. CTR303NMH-P 1-3/8" x 2-1/2" Oblong Slot Slotted Wall Wash 50° Swing adjustment, external 358° rotation. Slot aperture permits maximum beam area adjustment for either wall wash or concealed accent lighting effects. Black interior surface. Will accept (1) 45mm lens. 4-1/4" O.D. CTR307MH-(P, B) 4-1/4" O.D. CTR325MH-(P, B, NK, ST) Adjustable Pin Spot, Black Baffle CTR307MH-WHT Adjustable Pin Spot, White Baffle Deep baffle for maximum lamp concealment. May be used as a pin spot style downlight or an adjustable accent light. 35° Vertical adjustment. Will accept (1) 45mm lens. Fully Adjustable Die cast, fully adjustable, round lampholder and backplate. Easy relamping with twist-off front retaining ring. Unsurpassed aiming flexibility: 87° vertical, 359° rotational. Specify trim finish. Reflector/Trim Finishes Reflector Finish Options: BLK - Black PL - Matte Platinum WHT - White Trim Finish Options: B NK P ST - 1-847-559-5500 www.contechlighting.com Please Recycle Black Brushed Nickel White Brushed Stainless Steel All specifications subject to change without notice.