Installing SEIFA 2001 Standalone – Release 2.
______________________________________________________________
The SEIFA 2001 Standalone - Release 2 CD-ROM, contains the SEIFA Standalone Release 2 product.
This CD-ROM has been released to correct a software error contained in the previous SEIFA 2001 Standalone
product.
As such if you are using the SEIFA 2001 Standalone product option, please ensure you execute the SEIFA
2001 Standalone – Release 2.exe file located on this CD-ROM.
The Socio-Economic Indexes for Areas 2001 (SEIFA 2001) is a product developed especially for those
interested in the assessment of the welfare of Australian communities. The ABS has developed indexes to
allow ranking of regions/areas, providing a method of determining the level of social and economic well-being in
that region.
The 4 indexes are;
•
•
•
•
Index of Advantage\Disadvantage - A new index, and is a continuum of advantage to disadvantage.
Low values indicate areas of disadvantage; and high values indicate areas of advantage.
Index of Disadvantage - focuses on low-income earners, relatively lower educational attainment, high
unemployment, rented dwellings and people lacking fluency in English.
Index of Economic Resources - This index includes variables that are associated with economic
resources. Variables include rent paid, income by family type, mortgage payments and rental
properties.
Index of Education and Occupation - This index includes all education and occupation variables only.
These indexes show where affluent (as opposed to just high income earning) live; where disadvantaged (as
opposed to the unemployed) live: and where the highly skilled and educated (as opposed to the tertiary
educated people) live.
For further information on the 4 indexes, derived from the 2001 Census of Population and Housing, please refer
to the information paper entitled, '2039.0 Socio-Economic Indexes for Areas'. This information paper is located
on the SEIFA 2001 Standalone Release 2 CD-ROM, as a PDF file in the Installation Instructions folder.
SEIFA 2001 can be installed as a standalone product.
If you have CDATA 2001, SEIFA 2001 can also be installed as an add-on module for use with CDATA 2001 Full GIS and CDATA 2001 - Quickbuild. (Please refer to the installation instructions entitled, 'Installing SEIFA
2001 Add-On Datapack.'
During the installation process you will be asked to enter your SEIFA 2001 barcode.
This barcode will be located on the back of the plastic CD-ROM case or on the dispatch note, which came with
the product.
You have 2 options to obtain your unlock password;
Option 1:
Please call the Census Technical Helpline on 1800 676 646.
(The Helpline operates Monday to Friday 9am to 12.30pm & 1.30pm to 5pm - Canberra Time.)
The helpline operator will then confirm the level of your purchase and provide you with the unlock password.
Enter the unlock password as supplied from the Helpline. (Note: The unlock password is case sensitive)
Or
Option 2:
Please send an email to [email protected] and type SEIFA 2001 Standalone unlock password
in the subject field.
Please include the following details in the email.
•
•
•
•
Name
Organisation
Contact Phone Number
Barcode
The Helpline operator will then confirm which profile\s you have purchased and the level of your purchase\s.
A return email will then be sent back to you containing the unlock password, by the COB next business day.
IMPORTANT POINTS:
A) Please ensure you have Full Administrator Access to Windows.
B) Please also ensure that no other programs are opened during the installation process.
System Requirements.
Before you install the SEIFA 2001 Standalone – Release 2 product, make sure your computer system satisfies
the following prerequisites.
Operating Environment:
SEIFA 2001 Standalone is Microsoft Windows Operating Systems compliant and will operate on the following
platforms;
•
•
•
•
Windows98 Second Edition
Windows 2000
Windows XP
Windows NT 4.0
Note: In order to run the SEIFA 2001 Standalone product users will require 'Microsoft Data Access
Components 2.7' or higher to be installed.
2. Disk Space:
*
Depending on the geographic level purchased, the installed SEIFA 2001 Standalone – Release 2 files,
can occupy approximately a maximum of 70 MB of hard disk space.
Please follow the instructions below to install the SEIFA 2001 Standalone – Release 2 product.
Step 1.
Start up Windows.
Insert the Socio-Economic Indexes for Areas (SEIFA) 2001 - Release 2 Disk 1 of 1 into your CD-ROM drive.
From the Start menu, select Run (for Windows NT, select Run from the Program Manager File menu).
In the Run dialog, enter the CD-ROM drive name (e.g. in this case, F:\) followed by - SEIFA 2001 Standalone Release 2\SEIFA 2001 Standalone - Release 2 .exe and press OK.
(Alternatively, you can press Browse and search for the setup program.)
The SEIFA 2001 Standalone - Release 2 Welcome screen displays.
Follow the prompts and instructions to move through the setup wizard.
At each setup screen, press Next to move to the next screen, or Back to return to the previous screen.
The ‘ABS Conditions of Sale’ dialog window is displayed.
Read the ABS Conditions of Sale document.
If you agree with the conditions of sale, select ‘I accept the license agreement’.
Select Next - the ‘Unlock Dialog No. 1’ dialog box is displayed.
(If you do not accept the conditions of sale select ‘I do not accept the license agreement’. - The installation
process will be aborted.)
Step 2.
Select Next.
Select Next until the SEIFA 2001 Standalone - Release 2 Registration screen is displayed. (As shown below)
As mentioned before during the installation process you will be asked to enter your SEIFA 2001 Standalone
barcode. This barcode will be located on the back of the plastic CD-ROM case or on the dispatch note, which
came with the product.
You have 2 options to obtain your unlock password. Either call the Census Technical Helpline or send an email
request.
Option 1:
Please call the Census Technical Helpline on 1800 676 646.
(The Helpline operates Monday to Friday 9am to 12.30pm & 1.30pm to 5pm - Canberra Time.)
The helpline operator will then confirm the level of your purchase and provide you with the unlock password.
Or
Option 2:
Please send an email to [email protected] and type SEIFA 2001 Standalone unlock password
in the subject field. Please include the following details in the email.
•
•
•
•
Name
Organisation
Contact Phone Number
Barcode
The helpline operator will then confirm the level of your purchase and a return email will then be sent back to
you containing the unlock password, by the COB next business day.
Step 3.
Enter the Company, Barcode & Unlock code (Key) as supplied by the Helpline Operator.
(Note: The entries are case sensitive) – a similar dialog box will be displayed.
Select ‘Validate My Unlock Key’ > select Next.
Select Next. – the SEIFA 2001 Standalone – Release 2 Setup dialog box is displayed.
Enter in the details as required or accept the default entries.
Select Next. – the ‘SEIFA 2001 Standalone – Release 2 Destination’ dialog box is displayed.
The default destination directory folder is C:\Program Files\SEIFA2001 Standalone\
Press Next to accept the default installation directory, or press Browse to change the path.
Select Next – ‘SEIFA 2001 Standalone – Release 2 Global Write Directory’ dialog box is displayed.
Step 4.
SEIFA 2001 requires read write access to the destination directory (i.e. the Application Folder).
If you have read write access to the destination directory select Next.
Or
If you do not have read\write access to this directory select ‘Install to a separate directory where I have write
access’. Then Browse and select a directory that you do have read/write access to.
Select Next > Select Next. – the following dialog box is displayed.
If the nominated folder does not already exist, the installation program creates it.
A progress bar appears while the SEIFA 2001 Standalone – Release 2 product is installing.
On completion, it is suggested you restart your computer.
Select Finish.
Restart the computer.
Step 5.
You can start the SEIFA 2001 Standalone Release 2 product by executing the shortcut, which is created in
Windows list of Program Groups.
To access the SEIFA 2001 Standalone – Release 2 shortcut, from the Windows Start button select Start >
Programs > SEIFA 2001 > SEIFA 2001 V2.0.
To determine that you are using the correct SEIFA 2001 Standalone product, from within the product select
About SEIFA 2001 – the following dialog screen displaying the version should be displayed.
Note: After installation of the SEIFA 2001 Standalone – Release 2 product, the CD-ROM is not required, as
during the installation process the data files are installed to the selected hard drive or network drive.
Please store the SEIFA 2001 Standalone - Release 2 CD-ROM in a secure location for future installations.
The SEIFA 2001 Standalone product contains online help files to assist you with using the product.
KNOWN PROBLEMS & LIMITATIONS;
==============================
When obtaining SEIFA 2001 data, Users should confirm that the profile data is available at the requested
geographic level.
SEIFA 2001 data is available at the following geographic levels;
•
•
•
•
•
•
•
•
•
•
Collection District
Statistical Local Area
Statistical Sub-Division
Statistical Division
State
Local Government Area
Commonwealth Electoral Divisions
State Electoral Divisions
Postal Area
Suburbs
Data Fixes in SEIFA 2001 Standalone – Release 2
=============================================
This SEIFA 2001 Standalone – Release 2.0 product also contains some corrected data, correcting the data
contained in the original SEIFA 2001 Standalone product. In the original SEIFA 2001 Standalone product
previously issued on the 21st of November 2003, the Disadvantage Indexes & Quantiles contained were
displayed incorrectly.
Users of the SEIFA 2001 Standalone product must ensure they execute the SEIFA 2001 Standalone – Release
2.exe file, to ensure they are obtaining the corrected data.
SOFTWARE BUG FIXES IN SEIFA 2001 STANDALONE - Release 2;
======================================================
This SEIFA 2001 Standalone – Release 2 CD-ROM has been released to correct a software error in the
previous SEIFA 2001 Standalone product.
Previously On the ‘Summary’ tab, when a user changes the current index by selecting the drop down menu, the
Reference Values are not updated. The previous software always displayed\exported and printed the
‘Disadvantage Index - Reference Values’.
The SEIFA 2001 Standalone – Release 2 CD-ROM has been issued to correct this problem.
Download

Installing SEIFA 2001 Standalone – Release 2. ______________________________________________________________