GRUNDFOS DATA BOOKLET
CRIE5-36 A-FGJ-I-E-HQQE 3x400 50HZ
Grundfos Pump 96518463
Thank you for your interest in our products
Please contact us for more information, or visit our website
http://www.lenntech.com/grundfos/CRIE05/96518463/CRIE-5-36-A-FGJ-I-E-HQQE.html
info@lenntech.com
tel. +31-15-261.09.00
fax. +31-15-261.62.89
BE > THINK > INNOVATE
Company name:
Created by:
Phone:
Fax:
Date:
Position
Lenntech BV - lenntech.com
info@lenntech.com
+31 15 2610900
+31 15 2616289
-
Qty. Description
1
CRIE 5-36 A-FGJ-I-E-HQQE
Note! Product picture may differ from actual product
Product No.: 96518463
Vertical, multistage centrifugal pump with suction and discharge ports on same the level (in-line)
enabling installation in a horizontal one-pipe system. Pump materials in contact with the liquid are in
stainless steel. A cartridge shaft seal ensures high reliability, safe handling and easy service and
access. Power transmission is via a split coupling. Pipework connection is via combined
DIN-ANSI-JIS flanges.
The pump is fitted with a 3-phase, fan-cooled asynchronous motor.
The motor includes a frequency converter and PI controller in the motor terminal box. This enables
continuously variable control of the motor speed, which again enables adaptation of the
performance to a given requirement.
Further product details
An external sensor can be connected if controlled pump operation based on for example flow,
differential pressure or temperature is required.
The product carries the Grundfos Blueflux® label. It represents the best from Grundfos within
energy-efficient motors and frequency converters. Grundfos Blueflux® solutions either meet or
exceed legislative requirements such as the EuP IE3 grade.
Steel, cast iron and aluminium components have an epoxy-based coating made in a cathodic
electro-deposition (CED) process. CED is a high-quality dip-painting process where an electrical
field around the products ensures deposition of paint particles as a thin, well-controlled layer on the
surface. An integral part of the process is a pretreatment. The entire process consists of these
elements:
1) Alkaline-based cleaning.
2) Zinc phosphating.
3) Cathodic electro-deposition.
4) Curing to a dry film thickness 18-22 my m.
The colour code for the finished product is NCS 9000/RAL 9005.
Pump
A standard split coupling connects the pump and motor shaft. It is enclosed in the pump head/motor
stool by means of two coupling guards.
Printed from Grundfos CAPS [2013.03.059]
1/9
Company name:
Created by:
Phone:
Fax:
Date:
Position
Lenntech BV - lenntech.com
info@lenntech.com
+31 15 2610900
+31 15 2616289
-
Qty. Description
The pump head and flange for motor mounting is made in one piece (cast iron). The pump head
cover is a separate component (stainless steel). The pump head has a combined 1/2" priming plug
and air vent screw.
The pump is fitted with a balanced O-ring seal unit with rigid torque transmission system. This seal
type is assembled in a cartridge unit which makes replacement safe and easy. Due to the balancing,
this seal type is suitable for high-pressure applications. The cartridge construction also protects the
pump shaft from possible wear from a dynamic O-ring between pump shaft and shaft seal.
Primary seal:
- Rotating seal ring material: Silicon carbide (SiC)
- Stationary seat material: Silicon carbide (SiC)
This material pairing is used where higher corrosion resistance is required. The high hardness of
this material pairing offers good resistance against abrasive particles.
Secondary seal material: EPDM (ethylene-propylene rubber)
EPDM has excellent resistance to hot water. EPDM is not suitable for mineral oils.
The shaft seal is screwed into the pump head.
The chambers and impellers are made of stainless steel sheet. The chambers are provided with a
PTFE neck ring offering improved sealing and high efficiency. The impellers have smooth surface,
and the shape of the blades ensure a high efficiency.
The pump has a stainless steel base mounted on a separate base plate. The base and base plate
are kept in position by the tension of the staybolts which hold the pump together. The discharge side
of the base has a combined drain plug and bypass valve. The pump is secured to the foundation by
four bolts through the base plate. The flanges are fastened to the base by means of locking rings.
Motor
Printed from Grundfos CAPS [2013.03.059]
2/9
Company name:
Created by:
Phone:
Fax:
Date:
Lenntech BV - lenntech.com
info@lenntech.com
+31 15 2610900
+31 15 2616289
-
The motor is a totally enclosed, fan-cooled motor with principal dimensions to IEC and DIN standards. The motor
is flange-mounted with free-hole flange (FF).
Motor mounting designation in accordance with IEC 60034-7: IM B 5 (Code I) / IM 3001 (Code II).
Electrical tolerances comply with IEC 60034.
The motor requires no external motor protection. The motor control unit incorporates protection
against slow- and quick-rising temperatures, e.g. constant overload and stalled conditions.
Technical data
Liquid:
Pumped liquid:
Liquid temperature range:
Liquid temp:
Density:
Water
253 .. 393 K
293 K
998.2 kg/m³
Technical:
Speed for pump data:
Rated flow:
Rated head:
Shaft seal:
Approvals on nameplate:
2919 rpm
5.7 m³/h
189 m
HQQE
CE,TR
Materials:
Pump housing:
Impeller:
Stainless steel
DIN W.-Nr. 1.4408
AISI 316
ASTM A 351 CF 8M
Stainless steel
DIN W.-Nr. 1.4301
AISI 304
Installation:
Maximum ambient temperature: 313 K
Max pressure at stated temp:
25 bar / 120 °C
25 bar / -20 °C
Flange standard:
DIN
Pipe connection:
DN 32
Pressure stage:
PN 25
Flange size for motor:
FF265
Electrical data:
Motor type:
Number of poles:
Rated power - P2:
Power (P2) required by pump:
Mains frequency:
Rated voltage:
Rated current:
Cos phi - power factor:
Rated speed:
Efficiency:
Enclosure class (IEC 34-5):
Insulation class (IEC 85):
132SC
2
5.5 kW
5.5 kW
50 Hz
3 x 380-480 V
11,0-8,80 A
0,94-0,93
360-3530 rpm
IE3 89,2%
IP55
F
Others:
Label:
Grundfos Blueflux
Printed from Grundfos CAPS [2013.03.059]
3/9
Company name:
Created by:
Phone:
Fax:
Date:
Position
Lenntech BV - lenntech.com
info@lenntech.com
+31 15 2610900
+31 15 2616289
-
Qty. Description
Minimum efficiency index, MEI ≥: 0.57
Net weight:
88.4 kg
Gross weight:
119 kg
Shipping volume:
0.165 m3
Printed from Grundfos CAPS [2013.03.059]
4/9
Company name:
Created by:
Phone:
Fax:
Date:
Lenntech BV - lenntech.com
info@lenntech.com
+31 15 2610900
+31 15 2616289
-
96518463 CRIE 5-36 50 Hz
H
[m]
CRIE 5-36, 3*400 V, 50Hz
eta
[%]
Pumped liquid = Water
Liquid temperature = 293 K
Density = 998.2 kg/m³
260
100 %
240
220
200
100
180
90
160
80
140
70
120
60
100
50
80
40
60
30
40
20
20
10
25 %
0
0
0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
6.0
6.5
7.0
7.5
8.0
8.5 Q [m³/h]
P
[kW]
NPSH
[m]
7
6
5
7
P1
P2
6
5
4
4
3
3
2
2
1
1
0
0
Printed from Grundfos CAPS [2013.03.059]
5/9
Company name:
Created by:
Phone:
Fax:
Date:
Technical:
Speed for pump data:
Rated flow:
Rated head:
Impellers:
Shaft seal:
Approvals on nameplate:
Stages:
Pump version:
Model:
Materials:
Pump housing:
Impeller:
2919 rpm
5.7 m³/h
189 m
36
HQQE
CE,TR
36
A
A
Stainless steel
DIN W.-Nr. 1.4408
AISI 316
ASTM A 351 CF 8M
Stainless steel
DIN W.-Nr. 1.4301
AISI 304
I
E
CRIE 5-36, 3*400 V, 50Hz
eta
[%]
Pumped liquid = Water
Liquid temperature = 293 K
Density = 998.2 kg/m³
260 100 %
240
220
200
180
160
140
120
100
80
60
40
20 25 %
0
0
1
P
[kW]
100
90
80
70
60
50
40
30
20
10
0
2
3
4
5
6
7
8 Q [m³/h]
P1
P2
4
NPSH
[m]
4
2
2
0
0
4 x 13
250
100
150
14
220
G 1/2
188
SUPPLY:
SEE NAMEPLATE
FOR FUTHER DATA
96086116
L1 L2 L3
391
Water
253 .. 393 K
293 K
998.2 kg/m³
1256
Liquid:
Pumped liquid:
Liquid temperature range:
Liquid temp:
Density:
75
Flange standard:
Connect code:
Pipe connection:
Pressure stage:
Flange size for motor:
313 K
25 bar / 120 °C
25 bar / -20 °C
DIN
FGJ
DN 32
PN 25
FF265
34
Installation:
Maximum ambient temperature:
Max pressure at stated temp:
19 x 27
85
180
210
Material code:
Code for rubber:
CRIE 5-36 A-FGJ-I-E-HQQE
96518463
5700396783734
H
[m]
32
Product name:
Product No:
EAN number:
Value
89
105
140
Description
Lenntech BV - lenntech.com
info@lenntech.com
+31 15 2610900
+31 15 2616289
-
A:RS485 A
Others:
Label:
Minimum efficiency index, MEI ≥:
Net weight:
Gross weight:
Shipping volume:
Grundfos Blueflux
0.57
88.4 kg
119 kg
0.165 m3
Printed from Grundfos CAPS [2013.03.059]
0-10V
0/4-20mA
+OUT
132SC
2
5.5 kW
5.5 kW
50 Hz
3 x 380-480 V
11,0-8,80 A
0,94-0,93
360-3530 rpm
IE3 89,2%
IP55
F
NONE
85757417
+OUT
Electrical data:
Motor type:
Number of poles:
Rated power - P2:
Power (P2) required by pump:
Mains frequency:
Rated voltage:
Rated current:
Cos phi - power factor:
Rated speed:
Efficiency:
Enclosure class (IEC 34-5):
Insulation class (IEC 85):
Motor protec:
Motor No:
-
B:RS485 B
SIGNAL RELAY:
Max:250V/2A AC1
Min: DC 5V/1mA
STOP
7: SENSOR INPUT
4-20m A
RUN
8: +24V
1: DIGITAL INPUT
0/4-20m A
4: SETPOINT
0-10V
+
CONNECTION FOR
2: RUN/STOP
3: GND
9: GND
0/1
NC C NO
Y:SHIELD
10K
5: +10V
6: GND
GRUNDFOS SENSOR
OPTIONAL
CONNECTION
FOR PC-TOOL
6/9
Company name:
Created by:
Phone:
Fax:
Date:
Description
Value
Config. file no:
96115808
Printed from Grundfos CAPS [2013.03.059]
Lenntech BV - lenntech.com
info@lenntech.com
+31 15 2610900
+31 15 2616289
-
7/9
Company name:
Created by:
Phone:
Fax:
Date:
Lenntech BV - lenntech.com
info@lenntech.com
+31 15 2610900
+31 15 2616289
-
96518463 CRIE 5-36 50 Hz
188
1256
391
220
14
G 1/2
19 x 27
100
150
34
75
89
105
140
4 x 13
250
32
85
180
210
Note! All units are in [mm] unless others are stated.
Disclaimer: This simplified dimensional drawing does not show all details.
Printed from Grundfos CAPS [2013.03.059]
8/9
-
Printed from Grundfos CAPS [2013.03.059]
+OUT
96086116
0/4-20mA
0-10V
1: DIGITAL INPUT
9: GND
8: +24V
7: SENSOR INPUT
GRUNDFOS SENSOR
CONNECTION FOR
OPTIONAL
0/1
4-20m A
B:RS485 B
Y:SHIELD
0/4-20m A
+
-
0-10V
10K
RUN
STOP
SIGNAL RELAY:
Max:250V/2A AC1
Min: DC 5V/1mA
L1 L2 L3
CONNECTION
FOR PC-TOOL
6: GND
5: +10V
4: SETPOINT
3: GND
2: RUN/STOP
NC C NO
A:RS485 A
SUPPLY:
SEE NAMEPLATE
FOR FUTHER DATA
Company name:
Created by:
Phone:
Fax:
Date:
Lenntech BV - lenntech.com
info@lenntech.com
+31 15 2610900
+31 15 2616289
-
96518463 CRIE 5-36 50 Hz
Note! All units are in [mm] unless others are stated.
9/9
+OUT
Disclaimer: The information about the Grundfos pump in this document may be outdated.
Data may be subject to alterations without further notice.
Please contact us to verify the data above is still accurate/up-to-date.
All information is copyright Grundfos.
info@lenntech.com
www.lenntech.com
tel. +31-15-261.09.00
fax. +31-15-261.62.89