Western States
Roofing Contractors
Association
Tool Box
Safety Talks
G-2
SAFETY ITEMS REQUIRED ON SITE:
●
●
●
●
●
Personal Protective Equipment (PPE)
First Aid Kit
Material Safety Data Sheets (MSDS)
Fall Protection Equipment
Fire Extinguisher
DESCRIPTION: Generator (Gas Powered)
This equipment is designed to supply electricity to locations without standard utility service.
●
●
●
●
●
●
1.
2.
3.
4.
5.
6.
7.
8.
9.
Operate equipment for its intended use only and in accordance with manufacturerʼs
printed instructions.
Prior to the use of equipment, thoroughly inspect for wear and damage. Perform
maintenance as required by manufacturer.
While operating equipment be aware of perimeters, openings and obstructions in the
work area.
When refueling, eliminate sources of ignition, shut engine off and clean up spills before
restarting engine.
Report hazardous conditions and/or equipment deficiencies to supervisor immediately.
Do not perform any work or use tools or equipment while under the influence of drugs or
other substances that impair or affect your judgment or ability.
Electrical generators should be repaired by trained qualified personnel only.
All sockets, connectors, gauges, circuit breakers and regulators must be in good
working order.
Make certain the generator selected for use is of adequate size to safely produce the
quantity of electricity necessary to safely power the tool or tools to be operated.
Make sure all extension cords are of sufficient rating to safely conduct electrical power
without overheating and to reduce power loss due to resistance within the cord.
Locate the generator away from roof edges and other roof openings to avoid falls.
Locate the generator away from pathways.
Internal combustion engines must have a muffler of sufficient design to avoid discomfort
and/or hearing loss.
Locate the generator close to the work area to avoid excessive extension cord length.
Internal combustion engines must only be used in well ventilated areas or outdoors to
prevent carbon monoxide poisoning.
SAFETY MEETING
Topic:
Safety Meeting Date:______________
Location: ___________________________________________
Instructor: __________________________________________
Employees Signatures:
1. _________________________________________________
2. _________________________________________________
3. _________________________________________________
4. _________________________________________________
5. _________________________________________________
6. _________________________________________________
7. _________________________________________________
8. _________________________________________________
9. _________________________________________________
10. ________________________________________________
11. ________________________________________________
Other Safety Items Discussed: _____________________________________________
______________________________________________________________________
______________________________________________________________________
______________________________________________________________________
______________________________________________________________________
______________________________________________________________________
Action(s) Taken: _________________________________________________________
______________________________________________________________________
______________________________________________________________________
______________________________________________________________________
______________________________________________________________________
______________________________________________________________________