Proposal 11382 (STScI Edit Number: 1, Created: Friday, January 18, 2008 8:28:40 AM EST) - Overview
11382 - STIS SMOV4 CCD Functional
Cycle: 17, Proposal Category: SM4/STIS
(Availability Mode: RESTRICTED)
INVESTIGATORS
Name
Dr. Mary Elizabeth Kaiser (PI)
Dr. Charles R. Proffitt (CoI)
Institution
The Johns Hopkins University
Computer Sciences Corporation
E-Mail
kaiser@pha.jhu.edu
proffitt@stsci.edu
VISITS
Visit Targets used in Visit
Configurations used in Visit
Orbits Used Last Orbit Planner Run
01
STIS/CCD
1
18-Jan-2008 08:26:59.0
OP Current
with Visit?
yes
STIS/CCD
1
18-Jan-2008 08:27:36.0
yes
STIS/CCD
1
18-Jan-2008 08:27:50.0
yes
STIS/CCD
2
18-Jan-2008 08:28:30.0
yes
02
03
04
BIAS
NONE
BIAS
NONE
BIAS
DARK
BIAS
NONE
5 Total Orbits Used
ABSTRACT
This proposal corresponds to the SMOV4 activity summary, STIS06.
Proposal 11382 (STScI Edit Number: 1, Created: Friday, January 18, 2008 8:28:40 AM EST) - Overview
This purpose of this activity is to measure the baseline performance and commandability of the CCD subsystem.
This test assesses several CCD functions and performance characteristics, including: bias levels, read noise, dark current, CTE, and gain. Bias, dark,
and flat field exposures are executed to achieve these goals. Full frame and binned (2 x 1, 1 x 2, and 2 x 2) observations are made. Biases are taken at
gain=1 and read-out in subarray mode to support target acquisition and peakup modes.
Only the primary amplifier (Amp D) is used. Dark exposures are made outside the SAA (as is standard). All exposures are internals
OBSERVING DESCRIPTION
The visit structure outlined below has been constructed by filling the full orbit with internal exposures.
Visits 1 and 2 acquire bias frames and flats at the four commandable gain settings,1, 2, 4, and 8 e/DN. At the available gain settings (gain=2,8) 31
bias frames are acquired for construction of a superbias with negligible readout noise. At the supported gain settings (gain=1,4) only 21 bias frames
are acquired since the remaining frames necessary for construction of a superbias will be acquired as part of the Cycle 17 bias monitoring program. A
pair of flats is acquired in camera mode at two signal levels (achieved by using the 50CCD and F25ND3 apertures) at each gain setting. The flats
will be analyzed to (1) provide a rough confirmation of the nominal gain calibration and (2) determine if there have been changes in the number or
position of cosmetic artifacts, such as the shadows of particles on the detector window.
Bias and internal lamp exposures are obtained for binned modes, with binning factors of 2 x 1, 1 x 2, and 2 x 2, for evaluation of read noise, bias
level, and gain of the binned settings
Biases are acquired using a 100x100 and 1024x32 subarray readout (and gain=4) in support of downstream target acquisitions and peakups.
Visit 3 acquires dark frames and bias frames for evaluation of the mean dark current at the operating temperature of the CCD and the identification
of hot pixels.
2
Proposal 11382 (STScI Edit Number: 1, Created: Friday, January 18, 2008 8:28:40 AM EST) - Overview
Visit 4 acquires spectral flat field data at three different signal levels, spanning a factor of 100 in signal intensity, for evaluation of charge transfer
efficiency through the edge response method. In addition 29 biases are taken at gain=1 to enable the construction of superbiases for each of the
binned settings used in visit 2.
CALIBRATION JUSTIFICATION
These data will provide baseline measurements of
CCD bias levels, gains, read noise, charge transfer efficiency, dark current levels, and performance verification of binning and subarray readpout
capabilities. A rough assessment of changes in flat field features due to dust motes or other particulates is also provided. Numerous bias frames are
taken to permit construction of "super bias" frames in which the effects of read noise have been rendered negligible
This activity should execute after the STIS CCD anneal activity (STIS-05) and prior to other activities using the STIS CCD.
ADDITIONAL COMMENTS
DEPENDENCIES: Should be executed after the initial CCD anneal (STIS-05)
DURATION: 4 fully packed orbits (Internals)
If this activity was planned for occultation periods, it would require 12 orbits of
~1800 seconds duration each. This activity is a precursor to all other STIS CCD activities.
3
Exposures
Visit
Proposal 11382 - Visit 01 - STIS SMOV4 CCD Functional
Proposal 11382, Visit 01, implementation
Fri Jan 18 13:28:40 GMT 2008
Diagnostic Status: No Diagnostics
Scientific Instruments: STIS/CCD
Special Requirements: GYRO MODE 3GOBAD; PARALLEL
Comments: Acquire 31 bias frames for construction of a super-bias at a gain of 2, 8 e/DN, 21 bias frames at gain=1,4. Also take two pairs of lamp exposures in camera mode, one pair per signal level, for
measurement of flat field features and a rough calibration of the gain.
#
Label
Target
Config,Mode,Aperture
Spectral Els.
Opt. Params.
Special Reqs.
Groups
Exp. Time/[Actual Dur.]
Orbit
1
Bias
BIAS
STIS/CCD, ACCUM, DEF
DEF
GAIN=1
0.0 Secs X 21
[==>(Copy 1)]
[==>(Copy 2)]
[==>(Copy 3)]
[==>(Copy 4)]
[==>(Copy 5)]
[==>(Copy 6)]
[==>(Copy 7)]
[==>(Copy 8)]
[==>(Copy 9)]
[==>(Copy 10)]
[==>(Copy 11)]
[1]
[==>(Copy 12)]
[==>(Copy 13)]
[==>(Copy 14)]
[==>(Copy 15)]
[==>(Copy 16)]
[==>(Copy 17)]
[==>(Copy 18)]
[==>(Copy 19)]
[==>(Copy 20)]
[==>(Copy 21)]
2
Flat field
NONE
STIS/CCD, ACCUM, 50CCD
MIRROR
GAIN=1;
0.1 Secs X 2
LAMP=TUNGSTE
[==>(Copy 1)]
[1]
N
[==>(Copy 2)]
3
Flat field
NONE
STIS/CCD, ACCUM, F25ND3
MIRROR
GAIN=1;
10.0 Secs X 2
LAMP=TUNGSTE
[==>(Copy 1)]
[1]
N
[==>(Copy 2)]
Comments: should obtain ~4800 e-/pixel/exposure
4
Proposal 11382 - Visit 01 - STIS SMOV4 CCD Functional
Label
Bias
Target
BIAS
Config,Mode,Aperture
STIS/CCD, ACCUM, DEF
Spectral Els.
DEF
Opt. Params.
GAIN=2
Exposures (continued)
#
4
5
Flat field
NONE
STIS/CCD, ACCUM, 50CCD
MIRROR
GAIN=2;
LAMP=TUNGSTE
N
5
Special Reqs.
Groups
Exp. Time/[Actual Dur.]
0.0 Secs X 31
[==>(Copy 1)]
[==>(Copy 2)]
[==>(Copy 3)]
[==>(Copy 4)]
[==>(Copy 5)]
[==>(Copy 6)]
[==>(Copy 7)]
[==>(Copy 8)]
[==>(Copy 9)]
[==>(Copy 10)]
[==>(Copy 11)]
[==>(Copy 12)]
[==>(Copy 13)]
[==>(Copy 14)]
[==>(Copy 15)]
[==>(Copy 16)]
[==>(Copy 17)]
[==>(Copy 18)]
[==>(Copy 19)]
[==>(Copy 20)]
[==>(Copy 21)]
[==>(Copy 22)]
[==>(Copy 23)]
[==>(Copy 24)]
[==>(Copy 25)]
[==>(Copy 26)]
[==>(Copy 27)]
[==>(Copy 28)]
[==>(Copy 29)]
[==>(Copy 30)]
[==>(Copy 31)]
0.3 Secs X 2
[==>(Copy 1)]
[==>(Copy 2)]
Orbit
[1]
[1]
Proposal 11382 - Visit 01 - STIS SMOV4 CCD Functional
Exposures (continued)
#
6
Label
Flat field
Target
NONE
Config,Mode,Aperture
STIS/CCD, ACCUM, F25ND3
Comments: should obtain ~4800 e-/pixel/exposure
7
Bias
BIAS
STIS/CCD, ACCUM, DEF
Spectral Els.
MIRROR
DEF
Opt. Params.
Special Reqs.
GAIN=2;
LAMP=TUNGSTE
N
GAIN=4
6
Groups
Exp. Time/[Actual Dur.]
10.0 Secs X 2
[==>(Copy 1)]
[==>(Copy 2)]
0.0 Secs X 10
[==>(Copy 1)]
[==>(Copy 2)]
[==>(Copy 3)]
[==>(Copy 4)]
[==>(Copy 5)]
[==>(Copy 6)]
[==>(Copy 7)]
[==>(Copy 8)]
[==>(Copy 9)]
[==>(Copy 10)]
Orbit
[1]
[1]
Orbit Structure
Proposal 11382 - Visit 01 - STIS SMOV4 CCD Functional
7
Exposures
Visit
Proposal 11382 - Visit 02 - STIS SMOV4 CCD Functional
Proposal 11382, Visit 02, implementation
Fri Jan 18 13:28:42 GMT 2008
Diagnostic Status: No Diagnostics
Scientific Instruments: STIS/CCD
Special Requirements: GYRO MODE 3GOBAD
Comments: Acquire 31 bias frames for construction of a super-bias at a gain of 4, 8 dn e/DN. Also take two lamp exposures in camera mode for rough calibration of the gain.
Take binned biases and subarray biases.
#
Label
Target
Config,Mode,Aperture
Spectral Els.
Opt. Params.
Special Reqs.
Groups
Exp. Time/[Actual Dur.]
Orbit
1
Bias
BIAS
STIS/CCD, ACCUM, DEF
DEF
GAIN=4
0.0 Secs X 11
[==>(Copy 1)]
[==>(Copy 2)]
[==>(Copy 3)]
[==>(Copy 4)]
[==>(Copy 5)]
[==>(Copy 6)]
[1]
[==>(Copy 7)]
[==>(Copy 8)]
[==>(Copy 9)]
[==>(Copy 10)]
[==>(Copy 11)]
2
Flat field
NONE
STIS/CCD, ACCUM, 50CCD
MIRROR
GAIN=4;
0.4 Secs X 2
LAMP=TUNGSTE
[==>(Copy 1)]
[1]
N
[==>(Copy 2)]
3
Flat field
NONE
STIS/CCD, ACCUM, F25ND3
MIRROR
GAIN=4;
10.0 Secs X 2
LAMP=TUNGSTE
[==>(Copy 1)]
[1]
N
[==>(Copy 2)]
Comments: should obtain ~4800 e-/pixel/exposure
8
Proposal 11382 - Visit 02 - STIS SMOV4 CCD Functional
Label
Bias
Target
BIAS
Config,Mode,Aperture
STIS/CCD, ACCUM, DEF
Spectral Els.
DEF
Opt. Params.
GAIN=8
Exposures (continued)
#
4
5
Flat field
NONE
STIS/CCD, ACCUM, 50CCD
MIRROR
GAIN=8;
LAMP=TUNGSTE
N
9
Special Reqs.
Groups
Exp. Time/[Actual Dur.]
0.0 Secs X 31
[==>(Copy 1)]
[==>(Copy 2)]
[==>(Copy 3)]
[==>(Copy 4)]
[==>(Copy 5)]
[==>(Copy 6)]
[==>(Copy 7)]
[==>(Copy 8)]
[==>(Copy 9)]
[==>(Copy 10)]
[==>(Copy 11)]
[==>(Copy 12)]
[==>(Copy 13)]
[==>(Copy 14)]
[==>(Copy 15)]
[==>(Copy 16)]
[==>(Copy 17)]
[==>(Copy 18)]
[==>(Copy 19)]
[==>(Copy 20)]
[==>(Copy 21)]
[==>(Copy 22)]
[==>(Copy 23)]
[==>(Copy 24)]
[==>(Copy 25)]
[==>(Copy 26)]
[==>(Copy 27)]
[==>(Copy 28)]
[==>(Copy 29)]
[==>(Copy 30)]
[==>(Copy 31)]
0.4 Secs X 2
[==>(Copy 1)]
[==>(Copy 2)]
Orbit
[1]
[1]
Proposal 11382 - Visit 02 - STIS SMOV4 CCD Functional
#
6
Label
Flat field
Target
NONE
Config,Mode,Aperture
STIS/CCD, ACCUM, F25ND3
Comments: should obtain ~4800 e-/pixel/exposure
7
binned bias BIAS
STIS/CCD, ACCUM, DEF
2x1
Exposures (continued)
8
9
10
11
12
13
14
binned flat 2 NONE
x1
binned bias
1x2
BIAS
binned flat 1 NONE
x2
binned bias
2x2
BIAS
binned flat 2 NONE
x2
bias subarra BIAS
ys 100x100
bias subarra BIAS
ys 32x1024
STIS/CCD, ACCUM, F25ND3
STIS/CCD, ACCUM, DEF
STIS/CCD, ACCUM, F25ND3
STIS/CCD, ACCUM, DEF
STIS/CCD, ACCUM, F25ND3
STIS/CCD, ACCUM, DEF
STIS/CCD, ACCUM, DEF
Spectral Els.
MIRROR
DEF
MIRROR
DEF
MIRROR
DEF
MIRROR
DEF
DEF
Opt. Params.
Special Reqs.
GAIN=8;
LAMP=TUNGSTE
N
GAIN=1;
BINAXIS1=2;
BINAXIS2=1
GAIN=1;
BINAXIS1=2;
BINAXIS2=1;
LAMP=TUNGSTE
N
GAIN=1;
BINAXIS1=1;
BINAXIS2=2
GAIN=1;
BINAXIS1=1;
BINAXIS2=2;
LAMP=TUNGSTE
N
GAIN=1;
BINAXIS1=2;
BINAXIS2=2
GAIN=1;
BINAXIS1=2;
BINAXIS2=2;
LAMP=TUNGSTE
N
GAIN=4;
SIZEAXIS1=100;
SIZEAXIS2=100
GAIN=4;
SIZEAXIS1=1024;
SIZEAXIS2=32
10
Groups
Exp. Time/[Actual Dur.]
10.0 Secs X 2
[==>(Copy 1)]
[==>(Copy 2)]
0.0 Secs X 2
[==>(Copy 1)]
[==>(Copy 2)]
10.0 Secs X 2
[==>(Copy 1)]
[==>(Copy 2)]
0.0 Secs X 2
[==>(Copy 1)]
[==>(Copy 2)]
10.0 Secs X 2
[==>(Copy 1)]
[==>(Copy 2)]
0.0 Secs X 2
[==>(Copy 1)]
[==>(Copy 2)]
10.0 Secs X 2
[==>(Copy 1)]
[==>(Copy 2)]
0.0 Secs X 3
[==>(Copy 1)]
[==>(Copy 2)]
[==>(Copy 3)]
0.0 Secs X 3
[==>(Copy 1)]
[==>(Copy 2)]
[==>(Copy 3)]
Orbit
[1]
[1]
[1]
[1]
[1]
[1]
[1]
[1]
[1]
Proposal 11382 - Visit 02 - STIS SMOV4 CCD Functional
Exposures (continued)
#
15
16
17
Label
Target
Binned Bias BIAS
es
Binned Flats NONE
Binned Flats NONE
Config,Mode,Aperture
STIS/CCD, ACCUM, DEF
STIS/CCD, ACCUM, F25ND3
STIS/CCD, ACCUM, F25ND3
Spectral Els.
DEF
MIRROR
MIRROR
Opt. Params.
GAIN=1;
BINAXIS1=2;
BINAXIS2=2
GAIN=1;
LAMP=TUNGSTE
N;
BINAXIS1=1;
BINAXIS2=2
GAIN=1;
LAMP=TUNGSTE
N;
BINAXIS1=2;
BINAXIS2=2
11
Special Reqs.
Groups
Exp. Time/[Actual Dur.]
0.0 Secs X 4
[==>(Copy 1)]
[==>(Copy 2)]
[==>(Copy 3)]
[==>(Copy 4)]
10.0 Secs X 2
[==>(Copy 1)]
[==>(Copy 2)]
10.0 Secs X 2
[==>(Copy 1)]
[==>(Copy 2)]
Orbit
[1]
[1]
[1]
Orbit Structure
Proposal 11382 - Visit 02 - STIS SMOV4 CCD Functional
12
Exposures
Visit
Proposal 11382 - Visit 03 - STIS SMOV4 CCD Functional
Proposal 11382, Visit 03, implementation
Diagnostic Status: No Diagnostics
Scientific Instruments: STIS/CCD
Special Requirements: GYRO MODE 3GOBAD
Comments: Acquire dark and bias frames outside the SAA.
#
Label
Target
Config,Mode,Aperture
1
Bias
BIAS
STIS/CCD, ACCUM, DEF
Fri Jan 18 13:28:44 GMT 2008
Spectral Els.
DEF
Opt. Params.
GAIN=1
2
Dark
DARK
STIS/CCD, ACCUM, DEF
DEF
GAIN=1
3
Bias
BIAS
STIS/CCD, ACCUM, DEF
DEF
GAIN=1
4
Dark
DARK
STIS/CCD, ACCUM, DEF
DEF
GAIN=1
5
Bias
BIAS
STIS/CCD, ACCUM, DEF
DEF
GAIN=1
6
Bias
BIAS
STIS/CCD, ACCUM, DEF
DEF
GAIN=1
7
Dark
DARK
STIS/CCD, ACCUM, DEF
DEF
GAIN=1
8
Bias
BIAS
STIS/CCD, ACCUM, DEF
DEF
GAIN=1
9
Dark
DARK
STIS/CCD, ACCUM, DEF
DEF
GAIN=1
10
Bias
BIAS
STIS/CCD, ACCUM, DEF
DEF
GAIN=1
11
Binned Bias BIAS
es
STIS/CCD, ACCUM, DEF
DEF
GAIN=1;
BINAXIS1=2;
BINAXIS2=2
13
Special Reqs.
Groups
Exp. Time/[Actual Dur.]
0.0 Secs
[==>]
1200.0 Secs
[==>]
0.0 Secs
[==>]
1200.0 Secs
[==>]
0.0 Secs
[==>]
0.0 Secs
[==>]
1200.0 Secs
[==>]
0.0 Secs
[==>]
1200.0 Secs
[==>]
0.0 Secs
[==>]
0.0 Secs X 4
[==>(Copy 1)]
[==>(Copy 2)]
[==>(Copy 3)]
[==>(Copy 4)]
Orbit
[1]
[1]
[1]
[1]
[1]
[1]
[1]
[1]
[1]
[1]
[1]
Orbit Structure
Proposal 11382 - Visit 03 - STIS SMOV4 CCD Functional
14
Exposures
Visit
Proposal 11382 - Visit 04 - STIS SMOV4 CCD Functional
Proposal 11382, Visit 04, implementation
Fri Jan 18 13:28:44 GMT 2008
Diagnostic Status: No Diagnostics
Scientific Instruments: STIS/CCD
Special Requirements: GYRO MODE 3GOBAD
Comments: Acquire bias and spectral flat exposures for assessment of charge transfer efficiency via the edge response method. An off-nominal slit position providing uniform illumination to the top of the CCD
columns would be preferred.
#
Label
Target
Config,Mode,Aperture
Spectral Els.
Opt. Params.
Special Reqs.
Groups
Exp. Time/[Actual Dur.]
Orbit
1
Bias
BIAS
STIS/CCD, ACCUM, DEF
DEF
GAIN=1
0.0 Secs
[==>]
[1]
2
Flat Field
NONE
STIS/CCD, ACCUM, 52X2
G750M
GAIN=1;
0.1 Secs X 3
6768 A
LAMP=TUNGSTE
[==>(Copy 1)]
N
[==>(Copy 2)]
[1]
[==>(Copy 3)]
3
Bias
BIAS
STIS/CCD, ACCUM, DEF
DEF
GAIN=1
0.0 Secs
[==>]
[1]
4
Flat Field
NONE
STIS/CCD, ACCUM, 52X2
G750M
GAIN=1;
0.1 Secs X 3
6768 A
LAMP=TUNGSTE
[==>(Copy 1)]
N
[==>(Copy 2)]
[1]
[==>(Copy 3)]
5
Bias
BIAS
STIS/CCD, ACCUM, DEF
DEF
GAIN=1
0.0 Secs
[==>]
[1]
6
Flat Field
NONE
STIS/CCD, ACCUM, 52X2
G750M
GAIN=1;
10.0 Secs X 3
6768 A
LAMP=TUNGSTE
[==>(Copy 1)]
N
[==>(Copy 2)]
[1]
[==>(Copy 3)]
7
Biases
BIAS
STIS/CCD, ACCUM, DEF
DEF
GAIN=1
0.0 Secs
[==>]
[1]
8
Flats
NONE
STIS/CCD, ACCUM, F25ND3
MIRROR
GAIN=1;
10.0 Secs X 2
LAMP=TUNGSTE
[==>(Copy 1)]
[1]
N
[==>(Copy 2)]
15
Proposal 11382 - Visit 04 - STIS SMOV4 CCD Functional
Label
Target
Binned Bias BIAS
es
Config,Mode,Aperture
STIS/CCD, ACCUM, DEF
Spectral Els.
DEF
Opt. Params.
GAIN=1;
BINAXIS1=2;
BINAXIS2=1
Exposures (continued)
#
9
16
Special Reqs.
Groups
Exp. Time/[Actual Dur.]
0.0 Secs X 31
[==>(Copy 1)]
[==>(Copy 2)]
[==>(Copy 3)]
[==>(Copy 4)]
[==>(Copy 5)]
[==>(Copy 6)]
[==>(Copy 7)]
[==>(Copy 8)]
[==>(Copy 9)]
[==>(Copy 10)]
[==>(Copy 11)]
[==>(Copy 12)]
[==>(Copy 13)]
[==>(Copy 14)]
[==>(Copy 15)]
[==>(Copy 16)]
[==>(Copy 17)]
[==>(Copy 18)]
[==>(Copy 19)]
[==>(Copy 20)]
[==>(Copy 21)]
[==>(Copy 22)]
[==>(Copy 23)]
[==>(Copy 24)]
[==>(Copy 25)]
[==>(Copy 26)]
[==>(Copy 27)]
[==>(Copy 28)]
[==>(Copy 29)]
[==>(Copy 30)]
[==>(Copy 31)]
Orbit
[1]
Proposal 11382 - Visit 04 - STIS SMOV4 CCD Functional
Label
Target
Binned Bias BIAS
es
Config,Mode,Aperture
STIS/CCD, ACCUM, DEF
Spectral Els.
DEF
Opt. Params.
GAIN=1;
BINAXIS1=1;
BINAXIS2=2
Exposures (continued)
#
10
17
Special Reqs.
Groups
NEW ALIGNMENT
Exp. Time/[Actual Dur.]
0.0 Secs X 31
[==>(Copy 1)]
[==>(Copy 2)]
[==>(Copy 3)]
[==>(Copy 4)]
[==>(Copy 5)]
[==>(Copy 6)]
[==>(Copy 7)]
[==>(Copy 8)]
[==>(Copy 9)]
[==>(Copy 10)]
[==>(Copy 11)]
[==>(Copy 12)]
[==>(Copy 13)]
[==>(Copy 14)]
[==>(Copy 15)]
[==>(Copy 16)]
[==>(Copy 17)]
[==>(Copy 18)]
[==>(Copy 19)]
[==>(Copy 20)]
[==>(Copy 21)]
[==>(Copy 22)]
[==>(Copy 23)]
[==>(Copy 24)]
[==>(Copy 25)]
[==>(Copy 26)]
[==>(Copy 27)]
[==>(Copy 28)]
[==>(Copy 29)]
[==>(Copy 30)]
[==>(Copy 31)]
Orbit
[1]
Proposal 11382 - Visit 04 - STIS SMOV4 CCD Functional
Label
Target
Binned Bias BIAS
es
Config,Mode,Aperture
STIS/CCD, ACCUM, DEF
Spectral Els.
DEF
Opt. Params.
GAIN=1;
BINAXIS1=2;
BINAXIS2=2
Exposures (continued)
#
11
18
Special Reqs.
Groups
NEW ALIGNMENT
Exp. Time/[Actual Dur.]
0.0 Secs X 23
[==>(Copy 1)]
[==>(Copy 2)]
[==>(Copy 3)]
[==>(Copy 4)]
[==>(Copy 5)]
[==>(Copy 6)]
[==>(Copy 7)]
[==>(Copy 8)]
[==>(Copy 9)]
[==>(Copy 10)]
[==>(Copy 11)]
[==>(Copy 12)]
[==>(Copy 13)]
[==>(Copy 14)]
[==>(Copy 15)]
[==>(Copy 16)]
[==>(Copy 17)]
[==>(Copy 18)]
[==>(Copy 19)]
[==>(Copy 20)]
[==>(Copy 21)]
[==>(Copy 22)]
[==>(Copy 23)]
Orbit
[1]
Orbit Structure
Proposal 11382 - Visit 04 - STIS SMOV4 CCD Functional
19
Orbit Structure (continued)
Proposal 11382 - Visit 04 - STIS SMOV4 CCD Functional
20