2015-2016 Associate in Applied Technology Degree Worksheet
Industrial Maintenance Technologies
Name _______________________________ SID ______________ Date _________ Advisor ______________________
The Industrial Maintenance Technology program is designed to provide the knowledge, skills and abilities to successfully respond to a
broad range of work requirements and duties within industrial, manufacturing and processing environments. Students will learn
industrial safety, blue print reading, and have the options to learn multiple weld processes, basic machining, electrical fundamentals,
basic hydraulics and pneumatics. Students who choose to complete the AAT degree option will have the opportunity to customize
their program to a specific area of focus in Machining, Mechatronics or Welding.
Program Distribution
General Education Requirements - 15 credits
Courses listed below must be completed with a “C” or better.
• Communication Skills — 5 credits
• Computational Skills — 5 credits
• Human Relations — 5 credits
CMST& 230 (recommended)
TOTAL
NEEDED
0
Advising Notes & Degree Requirements
• This worksheet is only for advising purposes. Official approval
of credits for degree completion is subject to approval from
the Credential Evaluations Office: credeval@clark.edu
• Consult with an academic advisor on a regular basis for degree
completion planning. Contact the Advising Center to locate an
academic advisor. Call (360) 992-2345 or visit us online at:
www.clark.edu/advising
• Must earn a cumulative GPA of 2.00 in all coursework taken at
Clark College, and in all courses applied to the degree. Thirty
(30) credits minimum must be completed at Clark College to
meet Academic Residency.
Courses do not always follow numbering sequence, please
refer to the College Catalog for prerequisites and for info on
quarterly class offerings refer to the Annual Class Planner.
= course that is currently in-progress
TOTAL CREDITS REQUIRED: 91
Student Signature:
Advisor Signature:
Courses listed below must be completed with a “C” or better.
Major Area Requirements
PTWR 135
•
Major Area Requirements - 76 credits
NEEDS:
0
BTEC 150 Computer Business Applications
5
HLTH 120 Adult CPR and First Aid
1
MACH 111 Basic General Machining Processes
5
MACH 235 Elementary Metallurgy
2
MACH 236 Elementary Metallurgy Lab
2
MTX 100 Industrial Safety
1
MTX 101 DC Fundamentals
3
MTX 102 AC Fundamentals
3
MTX 105 Basic Hydraulics
2
MTX 107 Basic Pneumatics
2
MTX 123 Pick and Place Robot
3
or MTX 125 Servo Robot
3
MTX 285 Project Mgmt & Lean Manufacturing
2
WELD 102 Introduction to Welding
6
WELD 140 Gas Metal Arc Welding
6
and WELD 141 Gas Metal Arc Fabrication
6
or WELD 144 Shielded Metal Arc Welding
6
and WELD 144 Shielded Metal Arc Fabrication
6
Program Specialty Area Requirements
Complete a minimum of 24 credits from the following list:
MACH 112 Basic Engine Lathe Processes I
5
MACH 113 Basic Vertical Milling Processes I
5
MTX 110 Electric Motor Control I
4
MTX 130 Programmable Logic Controllers I
MTX 165 Electric Motor Control 2
4
4
MTX 207 Thermal Process Control
5
MTX 225 Speed Control System
2
MTX 230 Laser Alignment
2
MTX 250 Adv. Programmable Logic Controllers
4
5
WELD 110 Welding Blueprint Reading
TOTAL
NEEDED
0
Revised 07/20/15
Unofficial Evaluation
EPC: 7681
Associate in Applied Technology (AAT)
2015-2016
NOTES:
dŚĞƐƐŽĐŝĂƚĞŝŶƉƉůŝĞĚdĞĐŚŶŽůŽŐLJĚĞŐƌĞĞŝƐĚĞƐŝŐŶĞĚĨŽƌƐƚƵĚĞŶƚƐǁŚŽǁŝƐŚƚŽĐŽŵƉůĞƚĞĂƉƌŽŐƌĂŵ
ǁŝƚŚĂƐƉĞĐŝĨŝĐƚĞĐŚŶŝĐĂůĐĂƌĞĞƌŽďũĞĐƚŝǀĞ͘^ƚƵĚĞŶƚƐĂƌĞƌĞƋƵŝƌĞĚƚŽĐŽŵƉůĞƚĞĂŵŝŶŝŵƵŵŽĨƚŚŝƌƚLJ;ϯϬͿ
ĐƌĞĚŝƚƐĂƚůĂƌŬŽůůĞŐĞƚŽŵĞĞƚthe ĐĂĚĞŵŝĐZĞƐŝĚĞŶĐLJƌĞƋƵŝƌĞŵĞŶƚ͘^ƚƵĚĞŶƚƐĂƌĞƌĞƋƵŝƌĞĚƚŽ
ŵĂŝŶƚĂŝŶĂĐƵŵƵůĂƚŝǀĞ'WŽĨϮ͘ϬϬƚŽƌĞĐĞŝǀĞƚŚŝƐĚĞŐƌĞĞ͘
General Education Requirements Note: Some specific requirements of a program may also meet the General Education Requirements. A total of fifteen (15) credits between the three subject areas is required. You may take three (3) to five
(5) credits from the courses listed below in each area of Communication Skills, Computational Skills,
and Human Relations, but the combined total needs to equal fifteen (15) credits.
Communication Skills [C] – 5 credits
Complete five (5) credits from the list below:
• BTEC 107
• ENGL& 101 or 135
• ENGL 212 or BUS 211
• ENGL& 235
• PTWR 135
Computational Skills [CP] – 5 credits
Complete five (5) credits from the list below:
• Business – BUS 102
• Business Technology Medical Office – BMED 103, 105
• Math – MATH 103, 105, 111, MATH& 107 or any course for which one of these is a prerequisite
• Computer Technology – CTEC 121
• Professional Technical Computational Skills – PTCS 110
Human Relations [HR] – 5 credits
Complete five (5) credits from the list below:
• Addiction Counselor Education – ACED 101, 201
• Business Medical Office – BMED 166, 225, 226
• Business Technology – BTEC 140, 141, 143, 145, 148
• College Preparation – COLL 101
• Communication Studies – CMST& 210, 230
• Education – EDUC& 150
• Human Development – HDEV 105, 123, 155, 175, 186, 195, 198, 200
• Management – BUS& 101; MGMT 101, 106, 110, 112, 120, 122, 125, 128, 132
• Psychology – PSYC& 100, 200; PSYC 203
• Sociology – SOC& 101, 201; SOC 121, 131, 220
• Women’s Studies – WS 101
Short-Term Plan:
Summer
Summer
Specific Requirements in an Occupational Field
Students must complete the courses listed in their career plan, plus
electives as needed to meet the ninety (90) credit requirement. All
Associate in Applied Technology degree programs require at least
seventy-five (75) credits minimum of major-related requirements.