Proceedings of
ICEMS2008
The 11th International Conference on
Electrical Machines and Systems
October 17-20, 2008 Wuhan, China
Sponsored by
China Electrotechnical Society
National Natural Science Foundation of China
Co-Sponsored by
The Korean Institute of Electrical Engineers
The Institute of Electrical Engineers of Japan
Technical Co-Sponsored by
IEEE Industry Application Society
IEEE Industrial Electronics Society
The Institution of Engineering and Technology
Organized by
Huazhong University of Science and Technology
Published by
World Publishing Corporation
ISBN: 978-1-4244-3946-1
IEEE Catalog Number: CFP08801-PRT
TABLE OF CONTENTS
Multiphase Machine Theory and Its Applications ...........................................................................................1
J. Huang, M. Kang, J. Q. Yang, H. B. Jiang, D. Liu
Estimation of Parameters for Induction Motor’s Analytical Model by Direct Search .................................8
M. R. Rao
A Speed Sensorless Vector Control System of Induction Motors Using Current Observer
and Taking into Account Iron Loss .................................................................................................................11
S. Chen, M. Tsuji, F. Xu, L. Wang
Transient DC Side Short Circuit Currents of 12-phase Generator-Rectifier System.................................16
M. Fang, L. Fu, Z. Ye
Synchronous Generator Model Identification Using Half-Complex Wavelet Nonlinear
ARX Network ....................................................................................................................................................20
X. Wu, Y. Fan
Analysis of Rotor Equivalent Parameters of Solid-Rotor Synchronous Motors .........................................26
C. Liang, W. Shamming
Investigation for the Flashover Phenomenon in DC Machines .....................................................................30
Y. Nakanishi, K. Sugimoto, N. Morita
Flashover and Transformer Voltage ...............................................................................................................36
K. Sugimoto, Y. Nakanishi, N. Morita
Basic Studies For Accurate Commutation Analysis Which Enables Commutation Spark
Energy Estimation.............................................................................................................................................42
Q. Zhang, T. Ueno, N. Morita
Passivity-Based Control of Induction Motor Based on Euler-Lagrange (EL) Model with
Flexible Damping ..............................................................................................................................................48
Z. Xu, J. Wang, P. Wang
Load Characteristics of Induction Motor Made of Soft Magnetic Composite (SMC) ................................53
T. Fukuda, M. Morimoto
Experimental Transient Characteristics of a Three-Phase Squirrel-Cage Induction Motor
Under Unbalanced Voltage Condition ............................................................................................................57
I. Hirotsuka, K. Tsuboi, F. Ueda
Optimal Design of Rotor Slot of Three Phase Induction Motor with Die-Cast Copper Rotor
Cage....................................................................................................................................................................61
K. J. Park, K. Kim, S. H. Lee, D. H. Koo, K. C. Ko, J. Lee
Experimental Study of Radial Distributions of Electromagnetic Vibration and Noise in
Three-Phase Squirrel-Cage Induction Motor at No-load ..............................................................................64
I. Hirotsuka, Y. Niwa, K. Tsuboi, M. Kawakami
A Dynamic Decoupling Method for Speed-Sensorless Vector Control of Induction Motor.......................69
Z. Zhang, Q. Ge
Practical Speed Estimation Method for Induction Motor Vector Control System using
Digital Signal Processor(DSP)..........................................................................................................................74
Z. Jian, W. X. Hui, H. Yang
Rotor Resistance and Inductance Calculation of Single-Phase Induction Motors with Skin
Effect Consideration .........................................................................................................................................79
D. Shan, X. Wu
A Novel V/F Control System Based on Stator Voltage Oriented Method ....................................................83
R. Yang, W. Chen, Y. Yu, D. Xu
Stability Improvement of V/F Controlled Induction Motor Driver Systems Based on
Reactive Current Compensation......................................................................................................................88
R. Yang, W. Chen, Y. Yu, D. Xu
Research on Voltage-Reduce Energy Saving Strategy for Three-Phase Induction Motor .........................91
J. Du, T. Du
A Modified Voltage Model Flux Estimation of Induction Motors ................................................................94
K. Zhao, F. Lin, X. You
Time-Stepping Finite Element Analysis of Wye and Delta Connection Influence on
Induction Motor Copper Losses under Over-Voltage Condition .................................................................98
H. Zhao, X. Liu, Y. Luo, J. Hu
Single-Phase Self-regulated Self-Excited Induction Generator with Series Capacitance.........................102
Y. P. Sun
Determination of the High Frequency Inductance Profile of Surface Mounted Permanent
Magnet Synchronous Motors .........................................................................................................................105
K. Lu, M. Vetuschi, P. O. Rasmussen, E. Ritchie
A Novel Direct Torque Control for Permanent Magnet Synchronous Motor Drive.................................110
J. Wang, H. Wang, T. Lu, D. Teng
Simulation of Three-Phase Short-Circuit at the Terminals of Synchronous Machine .............................115
X. Liu, D. Liu, Y. Huang
Analysis of The No-Load Harmonic Electromagnetic Field of Synchronous Generator
Using Tooth Flux Method...............................................................................................................................118
X. Yonghong, H. Shaogang, G. Aigang, J. Rengmou, Z. Ping
Design of PID Excitation Controllers for Synchronous Generators Based on Fuzzy RBF
Neural Network ...............................................................................................................................................122
R. Gong, Y. Huang, H. Wei, X. Meng, L. Xie
Design and Simulation of a Traction Motor for Variable Speed Drive......................................................128
H. Liu, Y. Zhang, W. Kang, Z. Xia
Simulation for Researching Stator Insulation Structure of 135MW Evaporative Cooling
Turbo-Generator By Marinating...................................................................................................................132
L. R. J. Zhi-jian, L. Ying-zi
The Design of an Electrical Fault-Waveform Regenerator .........................................................................136
X. Sun, D. Liu, H. Long, L. Yun
Applied Engineering Design of Three Gorges’ 840MVA Hydro-Generator with Close Loop
Self Circulating Evaporative Cooling System...............................................................................................142
J. Yuan, G. Gu, L. Ruan, X. Tian, L. Duo, T. Zhang
Research of Power System Stabilizer Based on Prony On-line Identification and Neural
Network Control..............................................................................................................................................146
Z. Qiaoe, S. Xiaolin, Z. Shuangxi
Coupling and Decoupling Network for Surge Immunity Test on Power Lines .........................................151
M. Zhou, J. Wang, Y. Liu, F. Liu
Experimental Study on Magnetizing and Loss Characteristics of Electrical Strip for
Different Frequencies......................................................................................................................................156
Y. Xu, F. Wang
A Rapid Method for Load Testing and Efficiency Measurement of Three-Phase Induction
Motors ..............................................................................................................................................................160
C. Grantham, D. J. McKinnon
Development of Exposed Environment of Overhead Transmission Lines on Mice ..................................166
D. Geng, G. Xu, H. Yu, C. Li, Q. Yang, W. Yan
Optimization Design of Linear Halbach Array ............................................................................................170
J. Wang, C. Li, Y. Li, L. Yan
Cylindrical Linear Halbach Arrays for Permanent Magnet Tubular Linear Machines ..........................175
L. Zhao, Y. Peng, C. Sha, R. Li, Y. Xu
Design of Three-Stage Screw-Type Labyrinth Seal Using on Main Drainage Motor in Mine
and Research of Its Experiment.....................................................................................................................179
C. Du, G. Meng
Design of Cooperative Manufacturing System Based on Multi-Agent.......................................................183
L. Xue
On Study of Visualization in Electrical Machinery CAD ............................................................................186
Y. Boa, X. Xu
Cyclic Shift Genetic Algorithm Applied to Design Optimization of Electromagnetic Devices.................189
C. Tanggong, W. Youhua, L. Zibin, S. Qunfang, Z. Zhizhong
Shield-shape Design for Vacuum Circuit Breakers......................................................................................193
Z. Zhao, Y. Wang, T. Liu, L. Peng
The Design of High-Frequency Switching Power Supply for Field Test of High-Voltage
Circuit Breaker................................................................................................................................................197
Y. Sun, X. Zhang, L. Wang
Design Method of Shading Coil in Electromagnetic Mechanism of AC Contactor Based on
FEA...................................................................................................................................................................201
X. Su, N. Zhang, S. Zhang, B. Gao
Optimization Design of Permanent Magnet Synchronous Motor for the Electrical Spindle ...................205
L. Liyi, K. Baoquan, C. Jiwei, Z. Liangliang
Research for the Design Scheme of Bearingless Motors ..............................................................................208
X. Ye, J. Tang, T. Zhang
Structure and Finite Element Analysis on AC Two-Degree-Freedom Hybrid Magnetic
Bearing .............................................................................................................................................................212
T. Zhang, W. Ni, X. Ye
Design of Static Phase Generator System Based on Wireless Communication .........................................216
W. Huang, Z. Xi, Y. Chang
Nozzle Optimization of SF6 Circuit Breaker Based on Artificial Neural Network and
Genetic Algorithm...........................................................................................................................................222
Y. Cao, Y. Liu, J. Li, X. Liu, C. Hou
A Systematic and Qualitative Assessment Method and Software Design for Energy
Efficiency of Typical Electric Machine Systems with Pumps and Fans .....................................................226
L. Yi, Z. Zhengming, X. Jing
The Measurement and Prediction of Iron Loss Under Nonsinusoidal Voltage Waveform
with Arbitrary Frequency ..............................................................................................................................232
Y. Nie, Q. Hu, Y. Huang
A Drive-Less Oparating by Communication Based Train Control ............................................................237
R. G. Jeong, B. H. Kim, Y. K. Yoon
Wavelet Filter and Changing Rate Based Tire Runout Test Algorithm ....................................................243
Y. Liu, H. Wang
A Highly Accurate ECT Calibration System Based on Virtual Instrument Technology .........................246
Y. Tong, H. Li, L. Cheng, M. Zhang, Y. Deng
Denoising of Test Data of Sudden Three-Phase Short Based on Wavelet Algorithm ...............................249
E. Kang, W. Zhang, W. Yan, X. Yang, A. Wei
Mechanical Properties Test for Wiper Motors Using Wavelet Ridge ........................................................255
Y. Wei, W. Zhang, G. Liu, J. Feng
Comparison of IEEE 112 and New IEC Standard 60034-2-1......................................................................259
W. Cao
Determination of Critical Electric Field of Soil Under Lightning Impulse Voltage..................................265
J. Hu, X. Wen, L. Lan
Simulation Test Study on Shielding Failure of Center-phase of 1000kV Transmission Lines
Erected on ZBS2 Tower..................................................................................................................................269
Y. Wang, X. Wen, L. Lan, J. Hu
Research on Three Phase Synthetic Test Expert System of High Voltage Circuit Breaker .....................273
Z. Cai, D. Li
Research of TV Secondary Voltage Drop Measure Method Based on Clock Synchronism.....................277
S. Liang, M. Cao, F. Su, Z. Zhang
Analysis of Novel Gearless Traction Oil Pumping Unit Frame Based on UG Software ...........................282
B. Zhang, C. Jiang, G. Feng, W. Gao, J. Sun
Field and Thrust Analysis of Permanent Magnet Linear Synchronous Motor Based on
Different Shapes of Permanent Magnet ........................................................................................................288
L. Li-yi, L. Peng, H. Jun-jie, K. Bao-quan, L. Xiao-peng
A Brushless DC Motor Driving Experiment Based on 74HCT238 Decoder for Beginners......................292
H. Yin, Y. Ma
The Design and Implement of Virtual Laboratory System for Movement Control System
Based on Internet ............................................................................................................................................298
Y. Lingzhi, G. Wang, H. Peng, W. Deng, D. Zhang
Multi-Level Practice Training Mode of Electrical Engineering Education ...............................................302
W. Jun, P. Hong, L. Xinyi
A Discussion of Terrace-Oriented Method in Motor and Driving Experiment Teaching ........................304
Y. Guiyin
Study and Practice of Teaching Reform Approach for Electrical Machinery...........................................306
L. Sun, Y. Li, Y. Liu
A Simplified Determination of the Permanent Magnet (PM) Eddy Current Losses Due to
Slotting in a PM Rotating Motor ...................................................................................................................309
M. Markovic, Y. Perriard
Comparison of Vibration Characteristics of Several Interior Permanent Magnet
Synchronous Motors .......................................................................................................................................314
T. Ishikawa, H. Inaba, M. Matsunami
Air Friction Loss Calculation of High Speed Permanent Magnet Machines .............................................320
D. Zhang, F. Wang, X. Kong
A Fast Solving Technique for Dynamic Characteristic Analysis of Electromagnetic
Repulsive System.............................................................................................................................................324
W. Li, Y. W. Jeong, C. S. Koh
Sequential Response Surface Model Method for the Optimization Design of SMES ...............................328
G. Lei, K. R. Shao, Y. Li, G. Yang, J. Zhao
High-Frequency Characteristics of the Resonator’s Finite Element Simulation.......................................332
L. Zou, D. Wang
The Narrow Sense Chain-Making and Chain-Coupling Theorems of Element Grid in 2-D
Problems ..........................................................................................................................................................336
N. Xiong, K. Jiang
3D Dynamic Finite Element Analysis of Electromagnetic Problems Involving Movement......................342
Y. Zhang, B. Bai, D. Xie
Finite Element Method Analysis of the Electromagnetic Field of Brushless Doubly-Fed
Machine............................................................................................................................................................346
X. Deng, G. Tang, H. Zhang, X. Zhang
Armature Reaction Finite Element Computation of Surface-Mounted Brushless DC
Motors ..............................................................................................................................................................351
Z. Cunshan, B. Dunxin
The Characteristic Calculation of Reluctance Brushless Doubly-Fed Machine (RBDFM)
Using Tooth Flux Method...............................................................................................................................354
H. Shaogang, Z. Lu, G. Aigang
Air-gap Magnetic Field Design Optimization for U-shaped Ironless Permanent Magnet
Linear Synchronous Motors...........................................................................................................................358
P. Sun, H. Zhou
The Calculation of Temperature Field on a Permanent Magnet Wind Generator...................................364
Z. An, S. Hu, F. Yang, R. Tang
Calculation and Analysis of the 3D Magnetic Field of Halbach PM Array Based on
Equivalent Magnetic Charge Method ...........................................................................................................368
H. Jiang, X. Huang, X. Huang
Study of Solid Rotor Line-Start PMSM Operating Performance...............................................................373
L. Weili, Z. Xiaochen, C. Shukang, C. Junci
A Novel Hybrid Finite Element Method-Boundary Element Method with Double Scalar
Potentials for Open Boundary Magnetostatic Problems .............................................................................379
J. Gao, D. Liu, W. Zhao
Application of RBFEM in the Fast Design Optimization Electric Field ....................................................384
A. Q. Ma, X. C. Jiang
A Novel FEM-EFGM Model on Electromagnetic Field Computation .......................................................387
L. Wang, R. Tang
Study of Weight Functions in the Element-Free Galerkin Method ............................................................391
S. Liu, Q. Yang, C. Zhang, L. Jin
Application of Eddy Load in Electromagnetic Acoustic Emission..............................................................395
L. Jin, S. Liu, Q. Yang, C. Zhang
The Combined MVP-MSP Computation of Load Performance for a Hybrid Excitation
Claw-Pole Alternator ......................................................................................................................................398
Q. Wang, Y. Wang, G. Li, C. Hu, K. Zhang
The Method for Reducing Starting Resistant Moment by Suitable Top Rake of Magnetic
Pole in Permanent Magnet Generator Driven by Wind Turbine ...............................................................402
Z. An, W. Liu, Y. Li, Z. Song, R. Tang
A RBF Based Iterative Method for Nonlinear Electromagnetic Problems................................................405
Y. Zhang, G. Yang, K. R. Shao, L. D. Lavers
A Global Optimal Technique Based on Moving Least Square and Improved Differential
Evolution ..........................................................................................................................................................409
Y. Zhang, G. Lei, K. R. Shao, L. D. Lavers
Analysis of Electromagnetic Field and Performance on Traction Motor for Variable Speed
Drive .................................................................................................................................................................413
H. Liu, Z. Xia, Y. Zhang, W. Kang
A Study on Passive Magnetic Bearing with Halbach Magnetized Array ...................................................417
X. Feipeng, L. Tiecai, L. Yajing
Study of Induction Eddy Current Distribution Based on FEM ..................................................................421
J. Wang, J. Wang, C. Li
Analysis and Control of a Micromanipulation Stage Based on Electromagnetic Levitation....................424
T. Yang, B. Chen, W. Jiang, J. Chen, L. Guo
Calculation and Measurement of Potential and Electric Field Distribution along 1000 kV
AC Transmission Line Composite Insulator ................................................................................................428
D. Huang, J. Ruan, Y. Chen, F. Huo, S. Yu, S. Liu
Numerical and Experimental Results from a Vertical Yoke System for Measuring
Magnetic Properties of Fe-Si Steel Sheets .....................................................................................................434
K. Fonteyn, A. Belahcen
Solution of Inductances for Bearingless Switched Reluctance Motors with 3-D FEM Based
on Different Degree of Freedom.....................................................................................................................439
Z. Liu, S. Wang, Z. Deng
The Influence of Slit Construction on the Eddy Current Braking Torque Considered by
3D FEM Analysis.............................................................................................................................................444
H. B. Ihm, S. G. Lee, S. H. Ham, J. Lee
Current Distribution and Thermal Effects Analysis on the Sliding Contact Arrangement in
Circuit Breaker................................................................................................................................................447
N. Du, Y. Guan, W. Liu, S. Jin, M. Collod
The Study of an Independent Tunable Electron Gun for a Compact Terahertz Source
Based on Free Electron Lasers.......................................................................................................................452
J. S. Tian, Z. G. Ni, Z. Jing, J. Shi, J. W. Chen, P. Tan
Study on Numerical Simulation of Electrical Fields Inside Isolated Phase Bus Based on
ANSOFT ..........................................................................................................................................................455
J. Wang, L. D. Liu, Y. H. Gao, X. M. Liu, E. Z. Wang
Optimal Design of Permanent MRI magnet Based on Orthogonal Test Method Combined
with Response Surface Model ........................................................................................................................459
D. Xu, D. Xie
Calculation of Parameters in Transformer Winding Based on The Model of MultiConductor Transmission Line........................................................................................................................463
C. Zhao, J. Ruan, Z. Du, S. Liu, Y. Yu, Y. Zhang
Analysis of Electromagnetic Radiation of VSC-HVDC Converter Station Based on Dipole
Theory ..............................................................................................................................................................468
S. Yu, J. Ruan, Z. Du, D. Huang, R. Hu, B. Liu, Y. Yu
Analysis of Eddy Current Density Distribution in Slotless Traveling Wave Inductor .............................472
L. Pang, Y. Wang, T. Chen
The Research on Effect of Nozzle Throat Diameter of High Voltage SF6 Circuit Breaker on
Breaking Capability ........................................................................................................................................475
Y. Cao, X. Luo, H. Chunguang, L. Jing, X. Jiang
Study on Eddy Current Loss and Heat-Transfer Character of Stator Windings in
Synchronous Generator..................................................................................................................................479
L. Weili, C. Feng, Z. Fen
Loss Analysis of Transformer Core Using FEM Method Taking Account of Anisotropy........................485
X. Wang, D. Xie, Z. Cheng, J. Zhang
Finite Element Analysis of windings Electric Field of Transformer...........................................................489
J. Hong, M. Yueping, W. Li
Research on Eddy Loss in Cooling Configuration of Conduction-Cooled High
Temperature Superconducting Magnet ........................................................................................................493
T. Dai, Y. Tang, J. Shi, F. Guo, L. Wang, X. Fang
Robust Global Optimal Method for Electromagnetic Device Design Using Approximation
Models ..............................................................................................................................................................497
Y. Li, G. Lei, K. R. Shao
Parallel Computation the Potential Distribution and Electric Field along the 500kV Line
Composite Insulators ......................................................................................................................................501
L. Tianwei, R. Jiangjun, X. Yanling, W. Tian
Development of Evaporative Cooling Technology for Hydrogenerators ...................................................506
G. Guobiao, R. Lin
A Study on the Method of Temperature Distribution Control in Electromagnetism
Induction Heating............................................................................................................................................512
Qihan Wang, Y. Yao
Study about Temperature Modeling of Travelling Wave Induction Heating............................................516
J. Wang, Y. Wang
Research on the Calculation of Thermal Resistances of Thermal-Liquid Coupled Network
Model of Huge Hydro-Generator’s Stator ....................................................................................................519
H. Wang, H. Li, Y. Luo
Loss and Heat Computations of Damper Bars in Large Tubular Hydro-Generator................................524
Z. Fan, L. Han, G. Zhou, X. Hou, Y. Liao
Calculation and Measurement of Magnetic Field of Vehicles for City Mass Transportation..................530
S. Bartos, I. Dolezel, V. Jehlicka, J. Necesany, J. Skramlik, V. Valouch
3D Thermal Analysis of Water Cooling Induction Motor used for HEV...................................................534
L. Song, Z. Li, J. Gao, Q. Zeng, F. Wang
The Optimal Design and 3D Thermal Analysis of Stator for Evaporative Cooling
Hydrogenerator of Three Gorges Right Bank Underground Hydropower Station ..................................538
L. Ruan, G. Gu, J. He, X. Tian
Study on Conducted EMI from Operation of Electromagnetic Relay Contacts .......................................543
G. Zhai, W. Yang, X. Zhou
Study on EMS of Solid State Relay (SSR) with Voltage Dips and Short Interruptions............................548
S. Wang, L. Xu, G. Zhai, X. Bian
A Novel Control Strategy for Vibration Reduction in the Permanent Magnet Motor Drive
System with Eccentric Load ...........................................................................................................................552
H. Zhang, R. X. Zhao, M. L. Zhu, H. Omori, H. Kohso, K. Gamo
Designing Air Cooling Rotor for Evaporative Cooling Turbo Generator..................................................557
B. Xiong, G. Gu
A Study on the Reduction of Vibration and Acoustic Noise for Brushless DC Motor ..............................561
L. Jianjun, X. Yongxiang, Z. Jibin
3-D Finite Element Analysis of Dynamic Characteristics of Electromagnetic Relay
Interfered by Voltage Dips and Short Interruptions ...................................................................................564
G. Zhai, W. Yang
Analysis and Optimization for Electromagnetic Susceptibility of Solid State Relay in the
Presence of Incident Wave .............................................................................................................................568
S. Wang, X. Bian, L. Xu, G. Zhai
The Study of Two Novel Induction Heating Technology .............................................................................572
Y. Wang, J. Wang
Stiffness and Critical Speed Calculation of Magnetic Bearing-rotor System Based on FEA ...................575
T. Wang, F. Wang, H. Bai, H. Cui
Calculation of Temperature Distribution in the Stator of Larger Evaporative Cooling
Turbo-Generator.............................................................................................................................................579
G. Jiang-hong, F. De-ping, H. De-shu, L. Ximing
A Novel Coupled Magneto-Thermal-Flow Analysis for Temperature Rise Prediction of
Power Apparatus.............................................................................................................................................585
J. K. Kim, J. Y. Lee, S. B. Wee, S. C. Hahn
The Temperature Distribution of the Stator Bar in the Evaporative Cooling System of the
Hydro-Generator on Flow Blocked ...............................................................................................................589
L. Feihui, R. Lin, G. Guobiao, T. Xindong
The Research on Air Cooling Condenser of Natural Temperature Close-loop SelfCirculating Evaporative Cooling Electromagnetic Equipment ..................................................................592
J. Li, F. Song, G. Gu
Analysis of Temperature Field in Switched Reluctance Motor Based on Finite-Element ........................597
H. Sun, J. Gao, Y. Dong, Y. Zheng
Research of Core Loss of Permanent Magnet Synchronous Motor (PMSM) in AC Servo
System ..............................................................................................................................................................602
L. Li, X. Huang, B. Kao, B. Yan
Sensitivity of the Two-Phase Flow Pressure Drop to Influence Factors in the Evaporative
Cooling Generator...........................................................................................................................................608
H. Dong, C. Guo, S. Yu, D. Fu, G. Gu
Study of Two-Phase Flow Void Fraction in Evaporative Generator Stator Bar.......................................611
S. Yu, J. Cai, H. Dong, G. Gu
Vibration Analysis and Improvement of Stator Core in Three Gorges Hydro-Generator ......................615
J. He, L. Zhou, L. Chen, L. Duo, Z. Ma, T. Zhang, L. Luo, J. Zhang, G. Zhou
Fundamental Study of the Powder Core Used Low Noise and Low Vibration Motor..............................617
T. Naruta, Y. Akiyama, S. Mitsui, K. Iwata, H. Nagashima
Investigation of Electromagnetic Vibration of Permanent Magnet Brushless Machines .........................621
Y. Chen, H. Yang, Z. Han
Study on Vibro-Acoustics of Polyphase, Fractional Slot, Surface Mounted Permanent
Magnet Disc Machines ....................................................................................................................................627
Z. Song, R. Tang, S. Yu, W. Wang
Three-Dimensional Field Calculation and Analysis of Electromagnetic Vibration and Noise
for Disk Permanent Magnet Synchronous Machines...................................................................................631
W. Wang, Q. Li, Z. Song, S. Yu, J. Chen, R. Tang
Active Vibration Control Strategy Based on Expert PID Pitch Control of Variable Speed
Wind Turbine ..................................................................................................................................................635
Y. Xingjia, L. Yingming, X. Zuoxia, Z. Chunming
The Analysis of An Adaptive Sinusoidal Interference Cancellation System..............................................640
Y. Jiang, W. Ma, Z. Zhao
An Aliasing Compensation Method for Wavelet Packet Transform ..........................................................646
S. Wang, C. Hu, Q. Wang
Nonlinear Dynamics of Rotor System in Electrical Spindle Equipped with AMB....................................650
G. Zhang, S. Liang, B. Zhang, Y. Liu, R. Liu, K. Guo, G. Cheng
Research on Noise Spectrum Characteristics of Traction Motor System for Electric Buses
Based on Sound Intensity ...............................................................................................................................656
Z. Wang, C. Zhang, R. Jiao, Z. Wang, Q. Song, C. Zhang
The Effect of Digital Filter on Pulsed High Magnetic Measuring Signal ...................................................660
H. Li, Y. Wu, L. Liu, G. Chen, J. Wang, X. Han, Z. Xia
Development and Use of Pulsed Magnets......................................................................................................663
F. Herlach, T. Peng
The Magnetization Measuring System in Pulsed High Magnetic Field......................................................669
Y. Wu, H. Li, Y. Liu, J. Wang, X. Han, Z. Xia
Design of the Protection Inductor for the Power Supply of the Pulsed Magnetic Field
Facility with ANSYS .......................................................................................................................................672
L. Qiu, L. Li
The New Design of Magnetic Detecting Model in Magnetic Induction Tomography ...............................675
L. Ke, Y. Xiao
Design Principles for Optimized Pulsed Magnets ........................................................................................679
T. Peng, F. Herlach
Design on the Protection Inductor for the Capacitor Bank of Wuhan Pulsed High
Magnetic Field Facility ...................................................................................................................................685
Y. Lv, L. Li
High Field Magnet Made of Second Generation High Temperature Superconducting Wire ..................689
Y. Chen, D. W. Hazelton, S. Venkat
Wuhan Pulsed High Magnetic Field Center .................................................................................................694
L. Li, T. Peng, H. Ding, X. Han, Z. Xia, T. Ding, J. Chen, J. Wang, J. Xie, S. Wang, X. Duan, C.
Wang, F. Herlach, J. Vanachen, Y. Pan
Development of a Point Coil Magnetic Field Measurement System for Pulsed High
Magnetic Fields................................................................................................................................................699
X. Han, J. Xie, J. Luo, Y. Wu, Y. Xu
Separate Excitation of HTS YBCO Magnet Consisting of Pancake Windings..........................................704
M. Kang, M. Koo, H. Lee, G. Cha
Development of High Gradient Magnetic Filter with Evaporative Cooling System .................................708
F. Song, J. Yuan, X. Tian, G. Gu
Design of a 12 MJ Capacitor Bank of the Pulsed High Magnetic Field Facility at HUST,
Wuhan, China..................................................................................................................................................712
H. Ding, T. Ding, L. Li, H. Xiao, T. Peng, X. Duan, Y. Pan
Optimized Design and Numerical Simulation of Non-Destructive Pulsed Magnets..................................718
Y. Du, C. L. Gu
Application of Magnetorhelogocal Fluids Technology in Accelerometers .................................................722
S. Hou, Q. Yang, W. Yang, R. Yan, H. Chen, J. Liang
Study on Novel Measuring Method for Rotor Axial Displacement with Displacement
Sensor fixed on Radial Direction in Magnetic Bearing................................................................................726
M. Zong, L. Ba, F. Wang
Detection of Point-Plane Corona Discharges Using the Solar Blind Photosensitive Tube........................730
T. Cui, L. Du, C. Sun
Monitoring Wind Turbine Condition by the Approach of Empirical Mode Decomposition ...................736
W. Yang, J. Jiang, P. J. Tavner, C. J. Crabtree
Ultrasonic Fault Machinery Monitoring by Using the Wigner-Ville and Choi-Williams
Distributions ....................................................................................................................................................741
L. A. Escobar-Moreira
An In-Site System Based-on ARM of Faults Diagnostic with the Amplitude Recovery
Method .............................................................................................................................................................746
Y. Liu, L. Guo, X. Sun, G. An
A Novel Method for the Early Detection of Broken Rotor Bars in Squirrel Cage Induction
Motors ..............................................................................................................................................................751
B. Xu, S. Liu, L. Sun
A Study on Fault Diagnosis of Hydroelectric Generator Based on D-S Evidence Theory .......................755
J. Li, H. Wang
Detection Methods of Broken Rotor Bar Fault in Squirrel Cage Induction Motor with
Light-Load .......................................................................................................................................................759
B. Xu, H. Wang, L. Sun, F. Yang
On-Line Fault Detection of Inter-Turn Short Circuits in Turbo-Generator Rotor Windings.................763
Y. Li, J. Li, W. Sun
Steady-State Error Analysis and Digital Correction for Capacitor Voltage Transformers .....................769
J. Sun, X. Wen, L. Lan, X. Li
Fiber Detecting of High Voltage Insulator Contamination Grades Based on PSO-SVM.........................774
Q. Zhang, S. Jiao, G. Xie
Fault Diagnosis of the Inter-Turn Short Circuit in Rotor Windings Based on Wavelet
Analysis ............................................................................................................................................................778
Z. Zhang, Y. Li, J. Zhang
Fault Diagnosis of Rotor Winding Inter-Turn Short Circuit in Turbine-Generator Based
on BP Neural Network....................................................................................................................................783
Y. Li, Y. Zhao, L. Chen, X. Ji
Measurement of Very Fast Transient Overvoltages at the Transformer Entrance ..................................788
G. M. Ma, C. R. Li, J. T. Quan, H. X. Tang, J. Jiang, Y. H. Yin, H. G. Zhao, H. Chao
Induction Motor Parameter Determination Technique using Artificial Neural Networks ......................793
B. Karanayil, M. F. Rahman, C. Grantham
Partial Discharge in Light-Load 161KV Power Transformer ....................................................................799
M. K. Chen, C. Y. Cheng, J. M. Chen
Extraction of Partial Discharge Signal Feature with Chaos Oscillator and Adaptive Lifting
Wavelet.............................................................................................................................................................805
Z. Bide, Z. Houxuan, P. Huimin, Z. Aihua
Automatic Suppression of White Noise and Repetitive Pulses Interference in On-Site
Partial Discharge Monitoring ........................................................................................................................809
Y. Wan, Z. Li, M. Liu, Y. Xu
Development of Portable Partial Discharge Monitor for Generator Stator Windings in
Hydro Power Stations .....................................................................................................................................814
H. Kazuyoshi, F. Kazushi, S. Honda, M. Kaneko
An Acoustic Emission Method for On-Line Monitoring the Contamination- Causing
Flashover of Insulator.....................................................................................................................................817
C. M. Pei, N. Q. Shu, L. Li, D. Wang, S. P. Li
In-Service Motor Monitoring and Energy Management System Based on Wireless Sensor
Networks ..........................................................................................................................................................823
H. Jingtao
Application of the Prony’s Method for Induction Machine Stator Fault Diagnosis .................................827
F. Fang, S. Yang, X. Hou, Z. Wu
Harmonic Detection Algorithm Based on Recursive Filter .........................................................................832
G. Chen, L. Chen, Z. Cai
A Novel Online Diagnosis of Brushless Generator Rotary Rectifier Fault ................................................835
C. Zhang, L. Xia
Using Voltage Analysis Method to Diagnose the Winding Faults of Induction Motor .............................839
Z. Qi, C. Gu
Experimental Study of the Overheating Decomposition Products of Perfluorocarbon Used
in Evaporative Cooling Transformers...........................................................................................................844
F. Zhang, G. Zhang, W. Niu, X. Wang
Optical Observation on Forms of Vacuum Switching Arc in Short-Gap...................................................847
Y. Wu, H. Dong, Z. Zhou, J. Zou
A High Accuracy FFT Algorithm for Induction Motor Sensor-Less Speed Estimation...........................851
Q. Li, J. Hu
Speed Estimate for Maglev Train Based on Linear Induction Motor ........................................................855
S. Liu, D. Wei, G. Chen
Wireless Rotor Temperature Measurement System Based on MSP430 and nRF401...............................858
H. Zhe, G. Guobiao
Study of Wavelet Packet in the Electromagnetic Acoustic Emission Signal Processing ...........................862
S. Liu, J. Zhai, C. Zhang, Q. Yang
Power Quality Analysis and System Simulation on Permanent Magnet Direct-Drive Wind
Turbine.............................................................................................................................................................866
H. Wang, W. Wang, L. Bin
Summary of Research on Hidden Failures in Protection Systems..............................................................870
J. Zhang, M. Ding
PLC and PC Based Monitoring and Control System of the Switchgear Testing Laboratory ..................873
Y. Xiong, W. Xiao, J. Xiong, H. Tang, Z. Ning
Detection of Rotor Bar Breaking Fault in Induction Motors Based on Hilbert Modulus
Gyration Radius of Filtered Stator Current Signal .....................................................................................877
L. Sun
Multi-Physics Field Simulation for CYCIAE-100 ........................................................................................882
T. Zhang, J. Zhong, H. Yao, S. Wei, B. Ji, S. An, J. Yang, Y. Bi, C. Wang, X. Jia, F. Wang, M. Fan
Progress in Virtual Prototyping for Design of Compact Cyclotrons ..........................................................888
M. Fan, B. Qin, D. Chen, Y. Xiong, J. Xiong, T. Yu, J. Yang, Y. Feng, D. Li, L. Cao, C. Chu, T. Zhang
Superconducting Accelerator-Based PKU-THz Facility .............................................................................893
K. Yu, S. Quan, F. Zhu, W. Xu, J. Zhuang, K. Zhao
Breakdown Properties on Gas Rail Gap Switch with Operating Voltage of ±100kV ...............................897
Z. Liu, J. Zeng, F. Sun, A. Qiu
Analysis by Homogenization Theory and Experimental Research of Linear Accelerator
Collinear Load Coating ..................................................................................................................................901
Y. Sun, L. Shen, L. Cao, Z. Shu, W. Zhao, X. Wang, M. Li, K. Jin, Y. Pei
Small Valley Gap Magnet Design for a 10MeV PET Cyclotron .................................................................906
B. Qin, Y. Yang, K. Liu, Z. Huang, L. Zhao, C. Chu, M. Fan
The Mechanical Instability of the BPMs at HLS..........................................................................................910
Y. Cao, B. G. Sun, J. W. Li, D. H. He, X. H. Wang, P. Lu, C. Li, K. Xuan
Photon Beam Position Monitor Using Beam Profile System for HLS ........................................................914
X. H. Wang, B. G. Sun, P. Lu, T. J. Ma, J. W. Li, C. B. Shen
Research of Signal-processing Methods in Four-Quadrant Photodetector ...............................................917
C. B. Shen, B. G. Sun, T. J. Ma, P. Lu, S. F. Lin, X. H. Wang
An Experimental Study of Local Magnetic Field Intensity Effects on the Discharge
Characterization of Hall Thrusters ...............................................................................................................920
E. Peng, D. Yu, K. Han, F. Shang, C. Chen, X. Zhao, Y. Zhan
The Study of Some Key Technologies for a Compact Terahertz Source Based on FEL ..........................926
J. Tian, H. Luo, P. Tan, J. Shi, J. Chen, B. Qin
Design of a Hybrid Undulator for Compact Terahertz Radiation Source .................................................929
J. Xiong, B. Qin, P. Tang, Y. Xiong, Y. Pei, M. Fan
Numerical Optimized Design of Cooling System for 8MeV Irradiation Accelerator................................932
Z. Shu, L. Shen, W. Zhao, Y. Sun, X. Wang, Y. Pei
Conceptual Design of Control System for FEL Terahertz Radiation Source............................................937
J. Yang, B. Qin, D. Li, Y. Xiong, J. Xiong, T. Hu, L. Cao, Y. Pei, T. Yu
Effect of Magnetic Field in the ATON-Type Hall Thruster Buffer Chamber on Discharge
Current Characteristics..................................................................................................................................940
K. Han, D. Yu, E. Peng, L. Wei, Y. Ji, B. Jiang
Study of a Rail-Coil Hybrid Electromagnetic Launcher .............................................................................944
D. Wei, S. Liu, Z. Liu
A Recurrent Wavelet Neural Network Controller with Improved Particle Swarm
Optimization for Linear Synchronous Motor Drive ....................................................................................948
F. J. Lin, L. T. Teng, H. Chu
Current Harmonics Reduction of Square Wave Inverter by Using Adjustable Filter for
High Speed Motor Power Supply...................................................................................................................954
H. Cui, F. Wang, Z. Liang, K. Li
Indirect Magnetic Field Directional Method of Brushless Doubly-fed Machine with Wish
Reluctance Rotor Based on Slip Frequency Rotating Frame......................................................................958
Z. Wang, N. Zhao
Some Considerations of Eddy Current Proximity Sensor Applied for Motor Speed
Measurement ...................................................................................................................................................963
L. Weibo, Z. Hua, W. Qian, L. Jianxuan, T. Jian
Modeling and Control for Tubular Linear Permanent Magnet Synchronous Machines with
Gas Springs in Drilling Applications .............................................................................................................968
S. Zhang, L. E. Norum
A Novel Switching Table to Suppress Unreasonable Torque Ripple for the PMSM DTC
Drives ...............................................................................................................................................................972
L. Yaohua, D. Gerling, L. Weiguo
Effects and Detection of Misaligned Position Sensor in AC Servo Drive System with
Filtered Current Delay....................................................................................................................................978
M. Konghirum
Position Sensorless Control for Interior Permanent Magnet Synchronous Motors Using
H∞ Flux Observer ...........................................................................................................................................984
T. Senjyu, Y. Noguchi, N. Urasaki, A. M. Howlader, A. Yona, H. Sekine
Analysis and Experiment of a 6-phase Bearingless Induction Motor.........................................................990
M. Kang, J. Huang, J. Q. Yang, H. Jiang
Sensorless Direct Torque Control of High Speed PMSM Based on Variable Structure
Sliding Mode....................................................................................................................................................995
S. Wen, F. Wang
Digital Charge Control of Boost Converter with Constant Power Machine Load....................................999
H. Xu, X. Wen, T. A. Lipo
A Two-Phase SVPWM Strategy for Dead-Time Compensation...............................................................1005
X. Cheng, W. Qu, H. Lu, Y. Fan, L. Wu, S. Jiang
Synthesis Compensation Using Iterative Learning Control for Periodic Force Ripple of
Permanent Magnet Linear Motor................................................................................................................1011
M. Hang, Y. Junyou
A Sensorless Rotor Position Detecting Method for Self-Controlled Synchronous Motors.....................1017
C. Hasegawa, S. Nishikata
A Laboratory Test Bench for Electrical Traction Drives ..........................................................................1022
J. E. Hayek, A. Genini, G. Skarpetowski
Implementation of Two-Axis Highly Accurate Position Control of Space-Vector PWM
Based Microstepping Bipolar Drive ............................................................................................................1027
C. Yodsanti, M. Konghirum
Design of Auxiliary Front-end Converters for Adjustable Speed Drives Systems ..................................1032
C. C. Hou, K. C. Fang, P. T. Cheng
Design of PMSM Control System Based on Fuzzy Logic ..........................................................................1037
J. Cui, G. Mu, Y. Fu
Modelling and Implementation of an Improved DSVM Scheme for PMSM DTC .................................1042
Y. Wang, J. Zhu
Fuzzy-Based Linear Motion Control of a Non-contacting Steel Plate Conveyance System ...................1047
C. T. Liu, S. Y. Lin, Y. Y. Yang
The Rapid Soft Re-Switching Technology of Three-Phase Induction Motors.........................................1053
X. Cui, Y. Luo, L. Wu, Y. Yang, Z. Zhou, X. Liu
Full Digital Control Strategy for Soft-Switching Gas Metal Arc Welding Machine...............................1059
D. Sha, X. Liao
Design and Implementation of Modular Three-Phase Utility-Interactive Converter.............................1063
C. Wu, W. Zhu, Z. Yang, H. Liao, Z. Xu, H. Xu
Four-Switch Three-Phase Inverter Fed DTC System Considering DC-Link Voltage
Imbalance.......................................................................................................................................................1068
D. Sun, X. Liu, L. Shang, Y. B. Ivonne
A Novel Stability Improvement Method for V/F Controlled Induction Motor Drive
Systems...........................................................................................................................................................1073
C. Wei, Y. R. Feng, Y. Yong, W. G. Lin, X. D. Guo
Switched Reluctance Starter/Generator System in Low Voltage..............................................................1077
H. Chen, X. Zan, L. Cheng, L. Guo, J. Liu
Stabilization of Unstable Equilibrium Points by Time-Delayed Feedback Control Method
in an Induction Motor Drive System ...........................................................................................................1082
H. Li, X. Wang, W. Li
A Deadbeat Direct Torque Control of Surface Permanent Magnet Synchronous Machines
Using Space Vector Modulation...................................................................................................................1086
B. Wang, W. Guo, Y. Wang, Z. Wang
Comparative Study of PI, Sliding Mode and Fuzzy Logic Controller for Rotor Field
Oriented Controlled Induction Motor Drives.............................................................................................1089
Z. Yongchang, Z. Zhengming
Visual State Feedback Digital Control of a Linear Synchronous Motor using Generic
Video-Camera Signal ....................................................................................................................................1095
T. Koseki, G. Patterson, T. Suzuki
A Phase Detection Method for Harmonics and Unbalanced Voltage .......................................................1101
T. Senjyu, Y. Yonaha, N. Nakasone, A. Yona, C. H. Kim
Control Strategy for VSC-HVDC Under Unbalanced Input Voltages.....................................................1107
X. Shi, G. Zhou, J. Wang, C. Fu
Rating Lowering of 300W Inverter Module using PFC.............................................................................1111
T. K. Kim, H. K. Ahn, T. S. Yoon, S. K. Park, G. P. Kwak
Three-Phase PWM Inverters with Three-Phase Output Transformer and Three-Phase
Filter Inductor ...............................................................................................................................................1116
Z. Li, Y. Li, P. Wang, H. Zhu, F. Gao
A Slip Frequency Correction Method Applied to Induction Machine Indirect Vector
Control System ..............................................................................................................................................1122
Y. Fan, W. Qu, H. Lu, X. Cheng, X. Zhang, L. Wu, S. Jiang
Passivity-Based Control of Three Phase Voltage Source PWM Rectifiers Based on PCHD
Model..............................................................................................................................................................1126
P. Wang, J. Wang, Z. Xu
A Parameter Setting Method for Double Closed-Loop Vector Control of Voltage Source
PWM Rectifier...............................................................................................................................................1131
W. Wang, H. Yin
Key Power Semiconductor Devices and Development Trends..................................................................1137
L. Lorenz
A Novel Direct Power Control Strategy for Three-Level PWM Rectifier Based on Fixed
Synthesizing Vectors .....................................................................................................................................1143
T. Lu, Z. Zhao, Y. Zhang, Y. Zhang, L. Yuan
Principle and Simulation of a 5-Phase Bearingless Permanent Magnet-Type Synchronous
Motor..............................................................................................................................................................1148
M. Kang, J. Huang, H. Jiang, J. Yang
Determining of Hopf Bifurcation Point and its Stability Analysis in an Induction Motor
Drive System..................................................................................................................................................1153
H. Li, X. Wang, W. Li
New Direct Power Control Strategy for Grid Connected Voltage Source Converters ...........................1157
D. Zhi, L. Xu, B. W. Williams, L. Yao, M. Bazargan
A New Soft Switching Bidirectional Buck or Boost DC-DC Converter ...................................................1163
D. Lei, W. Xueping, L. Zhen, L. Xiaozhong
A Novel Contactless Auto-generation (36V) System ..................................................................................1168
B. Zhang, Y. Ren, M. Li, G. Feng
Online Efficiency Optimization of Stator-Doubly-Fed Doubly Salient Motor Based on a
Loss Model .....................................................................................................................................................1174
Y. Shu, M. Cheng, X. Kong
Theoretic Analysis and Experimental Study of a Novel Bridgeless Partial Active PFC.........................1179
X. Yang, H. Wang, X. Yang, H. Lei, H. Guan
Research on a New Three Phase Series Hybrid Active Power Filter........................................................1185
B. Xie, Q. Chen, W. Wu, L. Zhang
Outlook of Roles and Necessities of Power Electronics for VF-Power System of Future
Large Aircraft................................................................................................................................................1190
J. Chang
Study on the Control System for the Petroleum Well Plug Removal Robot with Electrical
Impulse...........................................................................................................................................................1196
Q. Li, Y. Liu, J. Cong, Z. Bai
General Strategy for Multiphase and Multilevel System Based on Analytical Meaning of
PWM ..............................................................................................................................................................1201
S. M. Cheng, K. Cai, Z. C. Li
Development of an Active Power Filter Physical Simulator Connected with RTDS...............................1206
H. Ding, W. Liu, Y. Li, X. Duan, D. Wu, Y. Lin, J. Chen, R. Zhang, J. Zhang
Design and Experiment of RSD-Based Great Power Pulse Generation Circuit......................................1212
L. Liang, Y. Yu, Y. Peng, C. Shang
A Novel Type Single_Stage ZVS-PWM High-Frequency Load Resonant Inverter with
High Performance PFC Rectifier for Consumer IH Appliances...............................................................1215
H. Sugimura, S. P. Mun, S. K. Kwon, S. Sumiyoshi, H. Omori, E. Hiraki, M. Nakaoka
The Model-Free Learning Enhanced Motion Control of DC Motor ........................................................1222
R. Cao, Z. Hou, W. Zhang
PWM Control of Five-Phase Five-Level Inverter Based on H-Bridge .....................................................1227
C. Zhang, X. Zhang, M. Qiao, F. Yu
Multi-Motor Synchronous System Based on Neural Network Control....................................................1231
C. Cong, L. Xingqiao, L. Guohai, Z. Liang, C. Li, Z. Buhui
Crossed-Feedback Control of Dual-Redundancy Permanent Magnetic Brushless DC Servo
System Used in Electro-Hydrostatic Actuator............................................................................................1237
Z. Qixun, L. Shengjin, L. Gang, Z. Yong
Hyper Space Vector Control for Brushless Direct Current Drives ..........................................................1242
G. Jin, H. Yuwen, L. Guozhuang
Carrier Modulation of Four-Leg Matrix Converter Based on FPGA ......................................................1247
M. Su, L. Xia, Y. Sun, H. Qin, H. Xie
Analysis and Experiment of Multi-Phase Induction Motor Drives for Electrical Propulsion................1251
X. Zhang, C. Zhang, M. Qiao, F. Yu
Compact Magnetic Compression Repetitive Pulsed Power Generator Based on IGBT .........................1255
D. Wang, W. Wu, D. Li, L. Wang
High Frequency Region Position Sensor-Less Vector Control of Interior Permanent
Magnet Synchronous Motor Drives.............................................................................................................1259
N. Koshio, H. Kubota
Speed Estimation of Induction Motor by Using Observer and PWM Carrier Frequency
Components ...................................................................................................................................................1263
E. Morooka, H. Kubota
A Current-Limiting Protection Strategy for the Combined Three-Phase Inverter ................................1267
H. Wang, X. Yue, X. Pei, Y, Kang
The Capacitor Commutated Converter (CCC) as an Alternative for Application in SlipEnergy Recovery Drives ...............................................................................................................................1272
A. Wang, Y. Yuan
One Synthesizing Vectors Method of Improving Three-Level DTC Output Performance ....................1276
J. Wang, Y. Zhong, J. Cai, W. Wu
Robust Sliding-Mode Control for Induction Motor Drive with RBF Neural Network Based
Rotor Speed Estimation ................................................................................................................................1282
G. Liu, X. Zhang
Realization of a SPWM Inverter for Multi-Phase Induction Motor Drives.............................................1287
D. Liu, J. Q. Yang, J. Huang, H. Jiang, M. Kang
A New Location Method for Permanent Magnet Synchronous Motors...................................................1291
S. Fang, B. Zhou, W. Luo
The Fault tolerant Control on a Dual-channel Brushless DC Motor Servo System................................1295
D. Huifen, Z. Yuanjun, L. Shengjun
Modelling and Simulation of Space Vector Modulation Techniques for Matrix Converters:
Analysis of Different Switching Strategies ..................................................................................................1299
J. Vadillo, J. M. Echeverria, A. Galarza, L. Fontan
The Influence of Dead-Time on AC Servo Motor’s Low-Speed Operation .............................................1305
S. Jingzhuo, S. Jing
Effect of Inverter’s Dead-Time on the Dynamic Characteristics of Permanent Magnet
Synchronous Motor Systems ........................................................................................................................1310
L. Mingji, C. Zhongqin, W. Jing, W. Xiangpeng
A Novel Algorithm for Space Vector Modulated Two-Stage Matrix Converter .....................................1316
G. Li, K. Sun, L. Huang
Research of Brushless Direct Circuit Linear Motor Robust Set-Point Control Based on
Robust L2 .......................................................................................................................................................1321
A. Liu, X. Zhang, X. Lin
Design and Realization of PMSM Vector Control IP Core Based on FPGA ...........................................1325
Q. Hui, Z. Ya
Research and Simulation on Constant Switching Frequency of Direct Torque
Control(DTC) ................................................................................................................................................1329
Y. Liao, X. Feng, X. Zhao, Y. Wang
A Hybrid Approach of Sensorless Rotor Position Self-Sensing for Brushless Dc Motor........................1334
L. Wenqi, H. Yuwen, H. Wenxin, C. Jianbo, Y. Jianfei
A New Approach to DTC-SVM for Induction Motor Drives ....................................................................1338
C. Hu, Y. Wan, J. Zhao, Y. Qin, S. Wan
Instantaneous Torque Control of a Permanent Magnet Wind Power Generator without a
Position Sensor ..............................................................................................................................................1343
Z. Xu, T. Pang, D. Xu
Study on the Protection of Asymmetric Bridge Circuit for Switched Reluctance Motor .......................1348
X. Liu, Z. Pan, Z. Q. Zhu
Study on Switched Reluctance Motor Using Three-Phase Bridge Inverter: Analysis and
Comparison with Asymmetric Bridge.........................................................................................................1354
X. Liu, Z. Pan
A Three-Level Induction Motors DTC Algorithm Based on Fixed Synthesizing Vectors
with Reduced Flux and Torque Ripples......................................................................................................1359
L. Lin, H. Zhong, J. Zhang, Y. Deng, Y. Zou
Nonlinear Feedback Linearization Control for SRM-Rotor Suspending in Shaft Direction .................1365
Z. Nan, G. Baoming, L. Zhuo, W. Yun, F. J. T. E. Ferreira, A. T. D. Almeida
Adaptive Sliding Mode Speed Control of Synchronous Reluctance Motor Drive Using
Input-Output Feedback Linearization ........................................................................................................1369
H. A. Zarchi, S. M. Fazeli, J. Soltani, H. W. Ping
Adaptive Sliding Mode Speed Control of surface Permanent Magnet Synchronous Motor
Using Input-Output Feedback Linearization .............................................................................................1375
S. M. Fazeli, H. A. Zarchi, J. Soltani, H. W. Ping
Research of Speed Sensorless Vector Control of an Induction Motor Based on Model
Reference Adaptive System ..........................................................................................................................1381
Y. Zhou, Y. Li, Z. Zheng
Mechanical Sensorless Control of SPMSM Based on HF Signal Injection and Kalman
Filter ...............................................................................................................................................................1385
Z. Zheng, Y. Li, X. Xiao, M. Fadel
A New Topology for Operating Three-Phase Induction Motors Connected to Single-Phase
Supply.............................................................................................................................................................1391
X. Yang, R. Hao, X. You, T. Q. Zheng
DC Offset and Parameter Compensated Stator Flux Estimator of Sensorless Vector
Controlled Induction Motor Drive ..............................................................................................................1395
M. Hajian, G. R. Arab, J. Soltani, S. Hoseinia
Analysis of the VSI with Small DC-Link Capacitor for Electric Vehicles ...............................................1401
J. Liu, H. Wen, X. Zhang
A Novel Line-to-Line Back EMF Calculation for Sensorless Brushless DC Motor Drives ....................1406
Z. Li, S. Cheng, Y. Qin, K. Cai
Ultra fast PMSM drive for Turbo-Blower Application .............................................................................1412
H. Cha, K. T. Vu, S. Choi, B. Han
Position Detecting for the Air-Cored TPMLSM with Linear Hall-Effect Sensors..................................1417
X. Liu, Z. Zheng, Y. Ye, Q. Lu
Dead-Time Effect and A Neutral Point Voltage Control for a Single-Phase NPC Converter................1421
W. S. Song, X. Y. Feng, S. Yang, W. Xie
Real-Time DSP-Based Computation-Efficient Speed-Sensorless Drive of Induction Motors................1427
F. Chen, L. Wang, C. Gu, H. Cheung, I. Lee, R. Cheung
Studies on Position Detection of Permanent Magnet Spherical Stepper Motor Based on
Machine Vision ..............................................................................................................................................1433
G. Li, J. Li, Z. Qian, C. Hu
Universal Voltage Vector Controller for Induction Motor Based on Motional
Electromotive Force ......................................................................................................................................1437
M. Meng
The Design on Adaptive Front Lighting System (AFS) Based on Brushless DC Motor .........................1442
P. Xu, J. Song, G. Shen
New Modulation Scheme for Matrix Converter Driving Brushless DC Motor .......................................1445
T. Jiang, B. Zhou, C. Hong, M. Shi
A Novel Instantaneous Values Control Strategy for Matrix Converters .................................................1451
M. Shi, B. Zhou, H. Qiu, T. Jiang
Low Cost Sensorless Vector Control for PMSM Compressors.................................................................1456
J. Yang, G. Yang, T. Li
A Closed Loop Control Method to Correct Position Phase for Sensorless Brushless DC
Motor..............................................................................................................................................................1460
X. Wu, B. Zhou, F. Chen, J. Wei, F. Song
A PSoC-Based Parallel Inductor Connection Driver of Ultrasonic Motor ..............................................1465
H. Wang, H. Li
Speed Sensorless Field-Oriented Control Based on the Novel Voltage Model and Phase
Difference.......................................................................................................................................................1469
Y. Zhou
Fuzzy Logic Energy Management Strategy for Supercapacitor-Based Energy Saving
System for Variable-Speed Motor Drives ...................................................................................................1473
S. Wang, Z. Qi, T. Wei
Control of Indirect Matrix Converter Based on Finite State Machine ....................................................1479
K. Sun, X. Lu, G. Li, L. Huang
Model Reference Adaptive Control for Permanent Magnet Synchronous Motor Servo
System ............................................................................................................................................................1483
X. Ma, L. Feng
A Novel Torque Servo Control System for the Flywheel Motor ...............................................................1488
Z. Jibin, C. Xia, T. Yu
Fuzzy Direct Torque Control Based on Space Vector Modulation with New Integrator for
Flux Estimation in Induction Motors ..........................................................................................................1491
Z. Zhang, J. Zhu, S. Wang, R. Tang
The Study on a Dual-Feed-Forward Control of DVR to Mitigate the Impact of Voltage
Sags Caused by Induction Motor Starting..................................................................................................1497
J. Zhou, H. Zhou, Z. Qi
Research on Asymmetry Characteristic of the Rotor in Dual-Redundancy PMSM System..................1501
W. Luo, B. Zhou, S. Fang
Digital Control Without Line Voltage Sensing for a Three Phase Bidirectional Inverter......................1506
F. Hao, Y. Fang, R. Wang, Y. Xing, Y. Ma
The Research of Speed Control for Induction Motor Based on Dynamic Recurrent Neural
Network..........................................................................................................................................................1511
W. Jun, P. Hong, W. Huabing, W. Qi
Based on Fuzzy-Neural Network of High Speed Linear Induce Motor Efficiency
Optimization (HSLIMEO) ...........................................................................................................................1515
Z. Hanxia, S. Yongxian
Predictive Control for a Permanent Magnet Synchronous Motor using Automatic Tuning
Smith-Predictor with Optimal Parameter Mismatch ................................................................................1520
Q. Zhang, Q. Shen, Q. Tong, H. Qin
A Novel SPWM Control Strategy to Reduce Common-Mode Voltage in Three-Phase FourLeg Inverters .................................................................................................................................................1526
J. Huang, R. Xiong, Z. Wang, W. Zuo, Y. Zhou, H. Shi
Research on H∞ Mixed Sensitivity Control of Brushless Doubly-Fed Motor..........................................1531
F. Zhang, S. Jin, G. Pan, G. Liu
Study on Control Method of Magnetic Bearing for High Speed Machine ...............................................1535
Y. Zhao, F. Wang
A Novel Fuzzy PID Velocity Control of Linear Elevator Driven by the Permanent Magnet
Linear Synchronous Motor ..........................................................................................................................1539
Q. Hu, H. Yu, Y. Mu, F. Yao, X. Zhang
The Study on the Constant Switching Frequency Direct Torque Controlled Induction
Motor Drive with a Fuzzy Sliding Mode Speed Controller .......................................................................1543
Z. Junhui, W. Mingyu, L. Yang, Z. Yanjing, L. Shuxi
H∞ Robust Two-Degree-of Freedom Control for High Rise Elevator Driven by Permanent
Magnet Linear Synchronous Motor ............................................................................................................1549
D. Yu, Q. Hu, Y. Wang, S. Xu, H. Jiang
Speed Sensorless Control of a Linear Synchronous Motor using State Observer on d-q
Reference Frame ...........................................................................................................................................1553
X. Wang, Q. Ge
Synchrodrive System of Dual Linear Motors Based on Hybrid Fuzzy PID Control ..............................1558
L. Wang, F. Huang, L. Wu
Three-Level NPC Inverter with IGCT for High Power AC Drives ..........................................................1562
S. Zhang, Q. Ge, Y. Li
A Novel Approach of Fixed Joint Multi-Motor Power Balance Control..................................................1567
Z. Li, J. Tang
Study On Neutral-Point Balancing For Three-Level Space Voltage Vector Pulse-Width
Modulation Inverter......................................................................................................................................1571
K. Yan, W. Wang, Z. Zhu, Q. Lu
Research and Simulation on ANN Speed-Sensorless Three-Level Inverter Vector Control
System for Induction Motor .........................................................................................................................1577
W. Jiang, X. Y. Feng, Q. Y. Wang
The Application of SAPWM Rectify Technology ON the Aircraft Electric Actuator ............................1582
Z. Wei, Z. Yuanjun
Sneak Circuit Analysis Method Based on Generalized Connection Matrix for Power
Converters......................................................................................................................................................1587
L. Qu, B. Zhang, D. Qiu, W. Tu
A Study of Electric Double Layer Capacitors Improving Electric Network Voltage
Fluctuation for Urban Railway Transit ......................................................................................................1591
W. Xun, Y. Zhongping
The Research on Protection of Over-Voltage About NPC Three-Level Medium Voltage
Motor Drives..................................................................................................................................................1595
J. Fang, C. Mao, J. Lu, D. Wang, Q. Zhang
Self-Tuning Vector Control System of Induction Machines Based on Dual EKF...................................1600
J. Li, Y. Zhang, Y. Zhong
Rapid Control Prototyping of Fifteen-Phase Induction Motor Drives Based on dSPACE ....................1604
L. Weichao, H. An, G. Shiguang, S. Chi
Path Tracking Control For a Four Wheel Differentially Steered Vision Robot......................................1608
F. J. Wang, B. Zhang
Design of Position Servo-System of BLDCM Based on Frequency Domain Method..............................1612
K. Yu, H. Guo, D. Wang, L. Li
Unity Power Factor Control for PMSM Position Sensorless Drive ..........................................................1618
F. Wu, S. Wan, S. Huang
Sensorless Control of Surface Permanent Magnet Synchronous Motor at Low Speed ..........................1621
J. Yang, C. Song
Sensorless Control of Salient PMSM with EKF of Speed and Rotor Position.........................................1625
Z. Zhang, J. Feng
Application of a Self-Tuning Two Degree of Freedom PID Controller Based on Fuzzy
Inference for PMSM .....................................................................................................................................1629
G. Shu-qiu, D. Xi-ying, W. Wei, R. Hai-yan
A Novel Method to Improve Voltage Sag Rid-through for Battery Powered PM Electric
Drive System..................................................................................................................................................1633
G. Luo, K. Song, W. Liu, Z. Zeng
Implementation of Full-Order Flux Observer for Speed Sensorless Drives of Induction
Motor at High Speeds ...................................................................................................................................1638
H. Luo, T. Luo, S. Wan
An Adaptive Control Based on Fuzzy Hierarchical Approach for the Permanent Magnet
Linear Synchronous Motor ..........................................................................................................................1641
W. Ai, G. Yan, Y. Chen, C. Li
A Method of Power Loss Calculation for RB-IGBT Matrix Converter ...................................................1645
K. Sun, L. Huang
Pulse Width Modulation Strategies and a Novel Mixed Control Method for DiodeClamped Five-Level Inverter .......................................................................................................................1649
B. Hu, S. Tao, L. Chang
Wide-Range Control of Output Voltage in Z-source Inverter by Neural Network.................................1653
M. J. R. Fatemi, S. Mirzakuchaki, S. M. J. R. Fatemi
Wide-Range Control of Output Voltage in Z-source Inverter by Neural Network.................................1659
C. Hu, Q. Wang, G. Li
An Online Optimization Approach to SHEPWM Applied to NPC Inverter ...........................................1665
W. Shi, C. Hu, Q. Wang
Analysis of Topology and Modulation Strategy for A Hybrid Multilevel Inverter .................................1669
L. Lu, X. Zhang, B. Wu
Double-loop Control and Stability Analysis Based on Three-Phase Buck-Boost Inverter .....................1673
Z. Jianlin, X. Lidan, L. Shasha
Medium Voltage Drive Based on the H Bridge Inverter and Its Common-Mode Voltage .....................1677
L. M. Yong, Y. Tao
Optimization of Neutral Shift in Cell-Fault Treatment for Cascaded H-Bridge Inverter......................1683
Z. Yi, S. Hongge, X. Bin
The Torque Oscillation Study in the Motor Soft Starting Process with Discrete Variable
Frequency Method ........................................................................................................................................1686
H. M. Hu, C. X. Mao, J. M. Lu, Y. X. Yu
Research on Linear Servo Motor Actuator and Its Control Technique of High-Voltage
Circuit Breaker..............................................................................................................................................1691
L. Xin, L. Yongxiang, W. Xiaoyu, W. Deshun
A Universal Digital Control Platform for Electrical Machines Based on the Programmable
Logic Devices and Digital Signal Processors Technology ..........................................................................1696
Q. Cheng, J. Fang
The Design of Dynamic Integrated Testing System Using Digital AC Servo Motor Based on
LabVIEW.......................................................................................................................................................1700
L. Yuanjiang, T. Yingzhong, L. Ming
Design and Analysis of Control System of a Proton Exchange Membrane Fuel Cell Directly
Connected with a DC Motor ........................................................................................................................1706
Y. Zhan, Y. Guo, J. Zhu, H. Wang
The Development of Active Controllable Energy Feedback Device Based on d-q Model ......................1711
L. Chengxi, Yuxiang, H. Shenghua
A Novel Family of ZCS-PWM Converters Minimizing Additional Conduction Loss ............................1716
L. Qin, Y. Wang, J. Gu, H. Xu
Flux-Weakening Control of Constant Power of Stator-Doubly-Fed Doubly Salient Motor
for Electric Vehicles ......................................................................................................................................1721
X. Kong, M. Cheng, Y. Shu
Analysis and Comparison of Two Control Strategies for Three-Phase Series-Parallel UPS..................1726
H. R. Karshenas, M. Niroomand
Design and Implementation of a New Hybrid Learning Control Strategy for Three-Phase
UPS .................................................................................................................................................................1732
M. Niroomand, H. R. Karshenas
Research of Interleaved Three-Phase Bidirectional DC/DC Converter Based on Control
Type Soft Switching ......................................................................................................................................1738
G. Shuqiu, Y. Ming, D. Xiying, H. Bin
Research on Novel Input-Paralleled Output-Paralleled Half-Bridge Converter ....................................1742
Z. Lian-qing, Z. Shi-hua
Uniform Modulation Principle and Ideal Operation Status of Parallel Inverters...................................1747
H. Cai, X. Qian
Hard Switching and Soft Switching Inverters Efficiency Evaluation.......................................................1752
B. L. C. Martinez, R. Li, K. Ma, D. Xu
The Research on Novel Repetitive Control Technology of Inverter .........................................................1758
H. Shan, L. Peng, X. Chen, C. Wu, Y. Kang, H. Li, Z. Liu, M. Yu, H. OuYang
Beat-Less Control Technology and Its Application in Three-Level Inverter ..........................................1763
X. Ge, X. Feng, B. Liu, S. Chen
Design of Voltage Controller of Single-Phase Inverter for Harmonic Rejection.....................................1768
Y. Kondo, H. Kubota
Proportional-Resonant Controller of High Power 400Hz Inverter in Stationary Frame .......................1772
C. Liu, C. Sun, W. Hu
Analysis and Selection of Switch for Double Modes Inverter in Micro-Grid System .............................1778
Z. Yang, H. Liao, C. Wu, H. Xu
Research on the Symmetrical Four-Phase Voltage Produced by theThree-Phase FourBridge Inverter ..............................................................................................................................................1782
Z. Zhu, Y. Chen, R. Wang
Modeling and Simulation of an Improved PLL-Controlled Circuit for Series Resonant
Inverter ..........................................................................................................................................................1786
Y. Peng, J. Xu, Y. Li
Hybrid Variable-Band Hysteresis DPM and Repetitive Control for a 400 Hz Inverter.........................1789
W. Liang-ping, H. Zhong-yi, X. Yan, X. Zhong-hua, W. Hong-fei
A Novel Control Method of Active Power Filter using Five-level Cascaded Inverter ............................1793
C. Junling, W. Ping, L. Yaohua, C. Yonggang
Research of RCD Clamp Snubber for High Power Combined Three-Phase Inverter............................1797
Y. Chen, X. Pei, Y. Kang
Research of Space Vector PWM Inverter Based on the Neural Network ................................................1802
H. S. Fen, Y. L. Zhi, T. P. An, L. J. Cheng, P. H. Mei
The Sliding Mode Control for Air Plasma Cutting Inverter Power Source ............................................1806
X. Bailu, D. Shanxu, L. Zhao, Z. Guorong, L. Xun
A Nural Network Indentification Method for the Inverter .......................................................................1810
C. Yan
Inverter Cutting Power Source with Double Close Loop Control ............................................................1814
Z. Guo-rong, Q. Cuifeng, L. Xuexiao, Y. Mi, L. Xun, D. Shan-xu, K. Yong
A Novel Single-Phase Three-Level PWM Rectifier With Asymmetrical Legs ........................................1820
X. Feng, W. Song, X. Ge
Analysis and Design of Main Circuit Parameters of New Industry Rectifier System with
SVC.................................................................................................................................................................1826
Z. Ning, L. Luo, Y. Li, J. Zhang, Z. Zhao, F. Liu
Study on Control Strategy of Three Phase High Power Factor PWM Rectifier .....................................1832
Y. Fang, Y. Xie, Y. Xing
Comparative Study on the Current Decoupled Control for the Three-Phase VoltageSource PWM Rectifier in the Synchronous Reference Frame ..................................................................1838
Y. Chen, Y. Zhong, D. Chen, X. Lai
Vector-Controlled PWM Rectifier with Hysteresis Regulators ................................................................1843
J. Zhang, Y. Kang, J. Chen, Z. Liu
A Linearization Voltage Control Strategy of Three-phase PWM Rectifier.............................................1846
Y. Zhong, Y. Chen, D. Chen
Modeling and Control Rule of Three-Phase Boost-Type Rectifier as Switched Linear
Systems...........................................................................................................................................................1849
W. Xiao, B. Zhang, D. Qiu
A Three-Level Rectifier with Reduced Number of Power Switches Based on One-Cycle
Control ...........................................................................................................................................................1855
K. Tian, M. Wang, C. Liu, B. Wei
The Research of Input-Output Linearization and Stabilization Analysis of Internal
Dynamics on the CCM Boost Converter.....................................................................................................1860
D. Shuai, Y. Xie, X. Wang
Comprehensive Analysis of Power Loss in the Output Diode of Flyback Switching
Converter Operating in DCM and CCM ....................................................................................................1865
J. Chen, G. Chen, Y. Guo, J. Zhu
Synthetic Design of the Transformer in Flyback Switching AC-DC Converters ....................................1871
G. Chen, J. Chen, Y. Guo, J. Zhu
Time-Frequency and Wavelet Transforms of EMI Dynamic Spectrum in Chaotic
Converter .......................................................................................................................................................1875
R. Yang, B. Zhang, Z. Liu, B. Xu
A New Soft Switching Current-Fed Isolated PWM DC_DC Converter...................................................1881
M. Delshad, B. Fani
A New Direct Sinusoidal Input/Output ac-ac Converter with Unidirectional Switches .........................1885
H. R. Karshenas, J. Mousavi
Research Of Phase-Shift Full-Bridge ZCT Converter Based On Digital Control...................................1891
X. Liu, Y. Zhao, Y. Zhang, B. Wang
A Novel Three-Phase Power Factor Correction Converter Based on Active Clamp
Technique.......................................................................................................................................................1896
D. Wang, H. Ben, T. Meng
Analysis and Design of High Frequency Asymmetrical Half Bridge Flyback Converter.......................1902
H. Li, W. Zhou, S. Zhou, X. Yi
Multilevel Current Source Converter Based On SHEPWM.....................................................................1905
W. Liqiao, W. Yong
Improved Three-Phase Single-Stage Isolated PFC Converter with Voltage-Clamping in
Primary Side..................................................................................................................................................1909
T. Meng, H. Ben, D. Wang
The Influence of Distributed Parameters of Transformer on the Performance of High
Power DC-DC Converter for Fuel Cell Vehicles ........................................................................................1914
L. Xu, C. Chen
The Applications of Bidirectional Full-Bridge DC-DC Isolated Converter in UPQC ............................1916
Y. Zhang, S. Zhang, J. Chen
Bidirectional Power Flow Z-Source AC-AC Converter.............................................................................1922
X. Fang
Optimized Design of Energy Storage Components for Three-Level Neutral Point Clamped
Back-to-Back Converter ...............................................................................................................................1928
Y. Zhang, Z. Zhao, Y. Zhang, T. Lu, L. Yuan
Control for Diode-Clamped Three-Level Half Bridge Converter.............................................................1933
L. Ying, F. Yu, X. Yan
Integrated Magnetic for Hybrid Full-Bridge Three-Level LLC Resonant Converter............................1937
K. Wu, Q. Chen, K. Jin, X. Ruan
Failure Simulation and Protection Strategy of Mid-Voltage Three-Level Frequency
Converter .......................................................................................................................................................1942
Q. Xiong, Z. Zhang, J. Liu, X. Yin
Research on Digital Controlled Converter for AC Power Electronics Burn-In Test with
Energy Feedback...........................................................................................................................................1946
Y. Zhou, L. Wang, X. Chen
An Improved Two-Transistor Forward Converter with Integrated Magnetics......................................1952
Q. Chen, J. Wang, H. Zhang, X. Ruan
Thermal Analysis and Design of Power Electronic Parts Assembled by Heat Sink in
Flyback Switching AC to DC Converters with Case Enveloped ...............................................................1958
J. Chen, G. Chen, Y. Guo, J. Zhu
Research on Electrical Locomotive 110V DC Power Supply Based on Power Factor
Correction ......................................................................................................................................................1963
Y. Liu, J. Gao, Y. Gao
Research info the Application of Split-Phase Coupling Array Integration Inductance in
Four-Phase Voltage Regulator Module .......................................................................................................1967
L. Hongzhu, R. Hesheng, Y. Yugang
Research of Dead-Time Compensation in SVPWM Modulator ...............................................................1973
Z. Chao, Z. Xu, L. Kong
Overlap Carrier Wave Phase Shift SVPWM Modulation Control Technique Research .......................1976
Y. Chen, D. Liu, Z. Zhu
A Novel Bipolar Bi-directional Buck-Boost Converter..............................................................................1980
L. Zhang, S. J. Yang, Y. Xing
An Improved Control Strategy for the Current Source Back-to-Back Converters ................................1985
L. Tan, Y. Li, C. Liu, P. Wang
A Novel Method for Improving the Fault Tolerance of Transformerless Cascade PWM
STATCOM ....................................................................................................................................................1990
M. Zhu, R. Zhao, H. Zhang, Y. Du
A Novel Dynamic Voltage Restorer with Flywheel Energy Storage System............................................1995
J. Zhu, X. Jiang, L. Huang
Research on Multi-Winding DSEM of the Aerial Ground Power Supply Unit.......................................2000
S. Peng, Z. Xucheng, Z. Xiaojing, Z. Lin, G. Chunlong, G. Pan
Hybrid Compensation for Harmonic, Reactive Power and Unbalance Under dq0
Coordinates....................................................................................................................................................2004
H. Peng, Z. Li, L. Li, C. Pei
Three-phase Active Power Filter Based on Simplified Space Vector Control .........................................2008
Y. Wang, F. Ye, M. Guan
A Novel Decoupling Control Based on D-Statcom .....................................................................................2012
L. Zhao, S. Hong-tao, W. Shu-hui, D. Shan-xu, K. Yong
A Real-time Digital Simulation and Testing System for SVC Used in EAF Power Supply
System ............................................................................................................................................................2017
X. Shi, C. Fu, W. Ma, G. Zhou
A New Control Strategy for Three-Phase Four-Wire UPQC with Zero Steady-State Error.................2022
T. Zhili, Z. Dongjiao, C. Jian, H. Dong
Convergence Process of the Active Power Filter Using Adaptive Inverse Modeling ..............................2026
W. Yanfeng, X. Hangtian, L. Weining, Z. Guoqing
Comparison of Hybrid Active Power Filter Topologies and Principles ...................................................2030
L. Chen, Y. Xie, Z. Zhang
Control Strategy of DC Voltage in Three-Phase Four-Wire Shunt Active Power Filter........................2036
X. Wei, Z. Liang, X. Meng, L. Cui, Z. Ji
The Research of Three-Phase Three-Wire Shunt Active Power Filter Current Loop
Multiple Control............................................................................................................................................2039
X. Wei, Z. Liang, X. Meng, Z. Ji, L. Cui
The Analysis and Compensation of Dead-Time Effects on Active Power Filter in α-β
Coordinate .....................................................................................................................................................2045
X. Zha, Y. Chen
Advanced Thyristor Switched Capacitors and Its Effect on Improving the Power Quality ..................2049
P. Li, L. Zhang, S. Rong
Deadbeat Current Control Based on New State-Observer for VSR.........................................................2053
C. Li, B. Guo, Y. Zhang, Y. Wang
A VSC-HVDC Fuzzy Controller for Improving the Stability of AC/DC Power System ........................2059
S. Li, J. Zhang, J. Shang, Z. Wu, M. Zhou
Modeling and Simulation of Dynamic Voltage Restorer Based on Super Capacitor Energy
Storage............................................................................................................................................................2064
Y. Li, Y. Wang, B. Zhang, C. Mao,
A Nonlinear Control Strategy for UPQC....................................................................................................2067
J. Le, Y. Xie, Z. Zhi, C. Lin
The Shunt Active Power Filter Based on ip-iq Detecting Method and Hysteresis Control......................2071
W. Hu, Y. Kang
A Novel Active Power Filter for the Voltage-Source Type Harmonic Source .........................................2077
D. Li, J. Tian
A Novel Power Quality Conditioner Suitable for High-Voltage Distribution Grids...............................2081
C. Zhang, Q. Chen, D. Li
A Sort of Harmonic Suppression and Reactive Power Compensation Device.........................................2087
L. Jianben, S. Yufei, L. Yongquan, W. Huajun, L. Xin, C. Qiaofu
Identification of Hybrid Active Compensation Topology for Electrified Railway Load ........................2092
W. Guo, T. Mingxing, R. Enen
Image Recognition Technology and Optimized Control Algorithm of the Self-Tracing
Smart Car Based on CMOS Camera Sensor ..............................................................................................2096
Z. Wang, Y. Ye
Study on Closed-Loop Control of Shock Process for Permanent Magnet Shaker in Particle
Impact Noise Detection .................................................................................................................................2102
S. Wang, G. Zhai, W. Yang
A Dimmable Electronic Ballast for Wired or Wireless Remote Control of Electrodeless
Fluorescent Lamp Group Lighting Systems ...............................................................................................2108
H. Kim, X. C. Ma, H. Xu, H. J. Kim
A Study on the Multiple Cold Cathode Fluorescent Lamp Drive with Capacitive Coupling.................2113
C. J. Kim, J. O. Park, Y. D. Son, H. K. Shin
Two-Stage Metal Halide Lamp Electronic Ballast with Constant Output-Power Control ....................2119
Y. K. Tan, C. M. Huang, T. J. Liang, J. F. Chen, L. S. Yang, M. Y. Cheng
Digital and Analog Hybrid Control of Multiphase Power Modules with Low OutputVoltage and High Output-Current ..............................................................................................................2125
C. Y. Yeh, L. S. Yang, T. J. Liang, R. L. Lin, J. F. Chen, H. T. Yang
An Efficient Power Management System for Biped Robot .......................................................................2130
L. Xie, Q. Qiao, Z. Wang
Simplified Predictive Current Controller for Bidirectional Voltage Source PWM Rectifier
Based on State Feedback Decoupling ..........................................................................................................2136
J. Wang, L. Zhou, J. Shi
Principle and Parameter Design for an Innovated Radial-Axial Hybrid Magnetic Bearing .................2142
Q. Wu, W. Pan, Y. Hong, Y. Sun, H. Zhu
Research on a Novel Gate Drive Circuit of Integrated Gate Commutated Thyristor ............................2147
Q. Chen, Q. Rui-chang
A Method for Electrical Network Voltage Compensation Without PLL Based on
Coordinate Transformation .........................................................................................................................2150
S. Zhang, J. Chen, W. Zhou
Stacked High/Low Voltage Level H-Bridge Circuit for Gradient Amplifier of MRI System ................2154
S. Li, B. Cao, D. Bi, X. Jiang
An Arbitrary Waveform Power Amplifier Adopting Switch-Linear Hybrid Technology .....................2159
X. Liu, J. Kan, S. Liu
Analysis of Transmission Mechanism and Efficiency of Resonance Coupling Wireless
Energy Transfer System ...............................................................................................................................2163
W. Fu, B. Zhang, D. Qiu, W. Wang
Closed Loop Test Platform for SVC Controller Based on RTDS .............................................................2169
X. Xiangning, Z. Yang, Z. Yan, Y. Meng, W. Xiaoning
Bifurcations and Chaos in H-Bridge DC Chopper Under Peak-Current Control ..................................2173
X. Wang, B. Zhang, D. Qiu
Research and Realization of a Pulse Width Modulation Technique Based on Voltage Space
Vectors............................................................................................................................................................2178
Z. Cong, D. Liu, L. Qingfen, Y. Huang
Research of System of Energy Recycling on Rubber-Tyred Gantry Crane.............................................2183
W. Liu, Z. Zhu, C. Chang, R. Wang, H. Xu
Identification Method for Transfer Function of Multi-DOFs Motion Stage............................................2188
X. Li, Z. Li, X. Chen
Study of Control Strategies for Transmission System of Electrical Wheels Autonomous
Dump Truck ..................................................................................................................................................2192
J. Wang, Y. Zhang, J. Zhang, C. Luo
Nonlinear Phenomena Analysis in Thyristor..............................................................................................2196
P. Tan, B. Zhang, D. Qiu
P-Fuzzy-PID Control in a Machine Tool Magnetic Suspension System...................................................2201
X. Yang, Y. Gao, J. Du, B. Yang
Experimental Study on High-Current Pulse Generator for Electromagnetically Induced
Acoustic Emission..........................................................................................................................................2205
C. Zhang, S. Liu, Q. Yang, L. Jin
A Neuromuscular-Like Control of Electric Vehicle...................................................................................2208
D. Tian, Q. Zhang, S. Cui
Comparison Between Periodic Function Space Based Power Theory and Traditional
Power Theory ................................................................................................................................................2212
F. Wang, Z. Mi, Q. Yang
A Current-Control Mode Three-Level PWM Switching Power Amplifier for Active
Magnetic Bearings.........................................................................................................................................2217
Z. Changsheng, C. Yang, Z. Dan, C. Liang
The Three-Level PWM Rectifier with High Reliability Based on the Three
Microcontrollers Control..............................................................................................................................2221
L. Wang, M. Li
A Control Strategy of Three-Phase Boost Type PWM Rectifier Based on Virtual Flux ........................2224
B. Xu, G. Yang, L. Sun
Advances of Interior Permanent Magnet (IPM) Wind Generators..........................................................2228
M. A. Rahman
Comparison of Different Structures for Variable Speed Constant Frequency Wind Power
Generator.......................................................................................................................................................2234
F. Wang, Y. Zhang, Y. Shen
Accurate Model for Power Turbine Generators as Recovery Energy......................................................2239
N. Matsui, F. Kurokawa, K. Shiraishi
Dual-Buck Full-Bridge Inverter...................................................................................................................2245
Z. Yao, L. Xiao, T. Wu, Y. Yan
Stability Analysis of Doubly-Fed Wind Power Generation System Based on Phase-Locked
Loop................................................................................................................................................................2251
Y. Zheng, Y. Li
Steady-State Performance Analysis of Six-Phase Self-Excited Induction Generator for
Renewable Energy Generation ....................................................................................................................2255
G. K. Singh
A New Control Methodology of Wind Turbine Generators for Load Frequency Control of
Power System in Isolated Island ..................................................................................................................2261
T. Senjyu, M. Tokudome, A. Uehara, T. Kaneko
Dynamic Performance Analysis of a Wind Turbine Generating System using a CurrentSource Thyristor Inverter ............................................................................................................................2267
F. Tatsuta, S. Nishikata
Dynamic Performance Analysis of A Hybrid Wind Turbine Generator System ....................................2271
Y. Fujii, C. Hasegawa, F. Tatsuta, S. Nishikata
Analysis of Wind Turbine Structural Loads Under Grid Fault................................................................2277
Z. Song, C. Xia, W. Chen
A Control Strategy for Direct-Drive Permanent-Magnet Wind-Power Generator Using
Back-to-Back PWM Converter....................................................................................................................2283
K. Huang, S. Huang, F. She, B. Luo, L. Cai
Development of Vertical-Axis Wind Turbine with Asynchronous Generator
Interconnected to the Electric Network ......................................................................................................2289
W. Hu, Y. Wang, X. Song, Z. Wang
Improved Control Strategy of an Active Crowbar for Directly-Driven PM Wind
Generation System Under Grid Voltage Dips.............................................................................................2294
N. Heng, L. Jiao, Z. Peng, H. Yikang
Modified DPC for DFIG Based Wind Power Generation Under Unbalanced Grid-Voltage.................2299
D. Sun, X. Guo, L. Shang, Y. He
Direct-Driven Wind Energy Conversion System with Multiple Armature-Winding HybridExcitation Generator ....................................................................................................................................2305
S. Huang, W. Hong, Y. Zhao, Q. Zhang
Research on the Unit Power Factor Control of Directly-Driven PM Wind Generator ..........................2311
N. Heng, L. Jiao, H. Yikang
Analysis of the By-Pass Resistance of an Active Crowbar for Doubly-Fed Induction
Generator Based Wind Turbines Under Grid Faults ................................................................................2316
W. Zhang, P. Zhou, Y. He
Development of Wind Turbine Simulator for Wind Energy Conversion Systems Based on
Permanent Magnet Synchronous Motor.....................................................................................................2322
W. Hu, Y. Wang, X. Song, Z. Wang
DC Injection Control for Grid-Connected Inverters Based on Virtual Capacitor Concept ..................2327
G. Xiaoqiang, W. Weiyang, G. Herong, S. Guocheng
DFIG Wind Power Generation Systems During Unbalanced Network Fault: Analysis and
Operation .......................................................................................................................................................2331
Y. He, J. Hu
An Engineering Design of a 2MW Direct-Drive Permanent-Magnet Wind-Power
Generation System ........................................................................................................................................2337
S. Huang, X. Long, L. Cai, K. Huang, J. Gao
Control of a Two-Phase Bi-Directional Interleaved Converter for Maximum Power Point
Tracking.........................................................................................................................................................2343
N. Jantharamin, L. Zhang
Phase Locked Loop for Electronically-Interfaced Converters in Distributed Utility
Network..........................................................................................................................................................2346
G. Xiaoqiang, W. Weiyang, S. Xiaofeng, S. Guocheng
The Dynamic Characteristics of an Isolated Self-Excited Induction Generator Driven by a
Wind Turbine ................................................................................................................................................2351
C. Grantham, D. Seyoum
Topologies and Control of VSC-HVDC Systems for Grid Connection of Large-Scale OffShore Wind Farms ........................................................................................................................................2357
K. Zhou, X. Fu, M. Cheng, X. Zhu, W. Wang, T. Wang
Agent-Based Energy Management and Control of a Grid-Connected Wind/Solar Hybrid
Power System.................................................................................................................................................2362
Y. Chen, J. Wu
Control Strategy of 600kW E-BOP for Molten Carbonate Fuel Cell Generation System......................2366
T. S. Hwang, K. S. Kim, B. K. Kwon
Comparative Analysis of PI Decoupling Control Strategies with or without Feed-Forward
in SRF for Three-Phase Power Supply........................................................................................................2372
S. Huang, L. Kong, T. Wei, G. Zhang
Performance Analysis and Improvement of a Proton Exchange Membrane Fuel Cell Using
Comprehensive Intelligent Control .............................................................................................................2378
Y. Zhan, J. Zhu, Y. Guo, H. Wang
One novel Variable-Speed Wind Energy System Based on PMSG and Super Sparse Matrix
Converter .......................................................................................................................................................2384
S. Yao, S. Mei, G. W. Hua
A New Smooth Scheme for Power Fluctuation using Inverter of Wind Power Generation
with Doubly Fed Induction Generator ........................................................................................................2390
T. Kai, A. Tanaka
Design Optimization and Evaluation of Different Wind Generator Systems ..........................................2396
H. Li, Z. Chen
Study on Variable Speed Direct Drive Wind Energy Conversion System with Doubly
Salient Electro-Magnetic Generator............................................................................................................2402
J. Chen, R. Chen, C. Gong, Z. Chen, Y. Yan
Direct Stator Current Phase Control Strategy of Doubly-Fed Induction Generator..............................2408
Z. Li, G. Li, Z. Gao
Modeling and Control of Doubly Fed Induction Generator Wind Turbines by Using
Causal Ordering Graph During Voltage Dips............................................................................................2412
L. Peng, Y. Li, B. Francois
A Novel Five Phase Fault Tolerant Doubly Salient Electromagnetic Generator for Direct
Driven Wind Turbine ...................................................................................................................................2418
D. Zhu, X. Qiu, N. Zhou, Y. Yan
Electromagnetic-Force Study of Permanent Magnet About Large Permanent Magnet
Generator in Wind-Power ............................................................................................................................2423
S. He, W. Wang, X. Zhang, X. Zhao, L. Guo
A New Type of Control Strategy of DFIG in Wind Power System Based on SMC.................................2428
Y. Wang, D. Zhao, B. Zhao, H. Xu
The Optimal Power Control of Doubly-Fed Variable Speed Constant Frequency
(DFVSCF) Wind Power Generator .............................................................................................................2432
Q. Liu, R. Lin
Modeling and Control of a Wind-Turbine-Driven DFIG Incorporating Core Saturation
During Grid Voltage Dips.............................................................................................................................2438
J. Zhao, W. Zhang, Y. He, J. Hu
Design of a Doubly-Fed Reluctance Machine for Wind Energy Generation ...........................................2443
W. Cao, X. Huang, I. French
Optimal Design and Comparison of Different PM Synchronous Generator Systems for
Wind Turbines...............................................................................................................................................2448
Y. S. Xue, L. Han, H. Li, L. D. Xie
Control of Variable-Speed Permanent Magnet Synchronous Generators Wind Generation
System ............................................................................................................................................................2454
Q. Deng, G. Liu, F. Xiao
Control of Direct-Drive Permanent-Magnet Wind Power System Connected to Grid...........................2459
D. Luo, Y. Sun, S. Huang, K. Huang
The Design of Inductance in AC Side of Grid-Connected Inverter in Wind Power
Generation .....................................................................................................................................................2464
Y. Yong, R. Yi, S. Huang-qing, T. Yan-yan, Y. Ying
Study on the Paralleling Operation Control of a Household Wind Power Generation
System ............................................................................................................................................................2470
S. He, X. Sun, J. Chai
Research on One-Cycle-Controlled Grid-Connected Inverter Application on Direct-Drive
Wind Power System ......................................................................................................................................2474
P. Zhao, J. Li, C. E, H. Xu
Adaptive Protection and Control Strategy for Interfacing Wind Generators to Distribution
Grids...............................................................................................................................................................2478
L. Wang, L. Zhou, H. Cheung, A. Hamlyn, T. Mander, I. Lee, R. Cheung
Research On the Control Strategy of Four-Multiple Grid Connected Converter for LargeScale Wind Energy Conversion System ......................................................................................................2484
Z. Yin, H. Liang
Analysis of Harmonic and Circulating Current for Paralleling Inverters in MW-Level
Wind Energy Conversion System ................................................................................................................2489
S. Chen, X. Jiang, J. Chai
Independent Control of Active and Reactive Power of the Grid-Connected Inverter............................2493
P. Li, J. Tang, L. Zhang, C. Lian
Inverter Control Strategy for Direct-Drive Permanent Magnet Wind Generator Under
Unbalance of Three-phase Source Voltage .................................................................................................2497
Y. Zhang, J. Gong, D. Xie
Design and Optimization of Proportional Resonant Controller for Rotor Current of a
Wind Turbine Driven DFIG.........................................................................................................................2502
H. Wang, W. Zhang, J. Hu, Y. He
Studies of Commercial Converter in Wound Rotor Brushless Doubly-Fed Marine
Generator Control System............................................................................................................................2507
T. Wu, X. Wang, J. W. Zhang, F. Xiong, Z. Kan
High Power Snubberless IGBT Converter For Direct-Drive Wind Power Generation
System ............................................................................................................................................................2512
M. Li, Y. Wang, B. Wang, L. Zhang, G. Liu
Cascaded Single Phase PFC Rectifier Pair For Permanent Magnet Wind Generation
System ............................................................................................................................................................2516
L. Liu, Y. Ma, J. Chai, X. Sun
Short-Term Wind Speed Forecasting for Wind Farm Based on Empirical Mode
Decomposition ...............................................................................................................................................2521
R. Li, Y. Wang
Small Signal Stability Analysis of Large Scale Variable Speed Wind Turbines Integration .................2526
X. Li, Z. Zeng, J. Zhou, Y. Zhang
Research on the Configuration and Control Methods of the Non-AC Grid Connected Wind
Power System with Energy-Storage Units ..................................................................................................2531
X. Zhang, J. Chen, C. Gong
Adaptive Active Filter for Interfacing Wind-Power DGs to Distribution Systems .................................2536
L. Wang, C. Gu, H. Cheung, W. Liu, I. Lee, R. Cheung
Maximum Wind Capture Based on Fuzzy PD Control Strategy ..............................................................2542
L. Le, L. Ying, P. Tian, P. Li
An Improved Strategy of Wind Power Generation Expansion Planning.................................................2547
C. Lian, P. Li
Research on Power Flow Algorithm for Power System Including Wind Farm.......................................2551
Y. Liu, W. Wang, L. Xu, P. Ni, L. Wang
A New Excitation Regulating and Harmonic Eliminating Equipment for Fixed Speed
Fixed Pitch Wind Turbines ..........................................................................................................................2556
J. Gong, D. Xie, Y. Zhang
Offshore Wind Farm with Dispersed Wind Turbines Control and HVDC Grid-Connected
Control ...........................................................................................................................................................2561
X. Lei, X. Da, Z. Yanchi
Vectorial Dynamic Optimal Power Flow Calculation Including Wind Farms Based on
Step-Controlled Primal-Dual Interior Point Method.................................................................................2567
Z. Qin, Y. Yang, J. Wu
A Novel Dual Power Flow Wind Power Generation System .....................................................................2573
X. Sun, M. Cheng, L. Xu, W. Hua
Grid Integration of DFIG-Based Offshore Wind Farms with Hybrid HVDC Connection ....................2579
H. Zhou, G. Yang, H. Geng
Comparison of Transient Behaviors of Wind Turbines with DFIG Considering the Shaft
Flexible Models..............................................................................................................................................2585
R. Ye, H. Li, Z. Chen, Q. Gao
Design of Wind Turbine Controller by Using Wind Turbine Codes........................................................2591
J. Zhang, M. Cheng, Z. Chen
The Impact of Nan'ao Wind Farm Integration on Power Quality of Shantou Power Grid ...................2596
W. Hu, Z. Wu, Y. Zhang, L. Ye, Q. Zhong
Study of a Novel Buck-Boost Inverter for Photovoltaic Systems ..............................................................2602
B. Hu, L. Chang, Y. Xue
Research of Multi-Power Structure Optimization for Grid-Connected Photovoltaic System
Based on Markov Decision-Making Model.................................................................................................2607
Y. Li, J. Niu, R. Luan, Y. Yue
Design and Implementation of A Novel MPPT Controller Based on Sun Tracking
Technology.....................................................................................................................................................2611
G. Li, X. Shi, C. Fu, G. Zhou
DC/DC Converter Applied in the Photovoltaic-Inclined Thermal Collector Hybrid Systems
for Brackish Water Desalination .................................................................................................................2616
L. Yuan, Y. Lu, M. Eltawil, Z. Zhao
Curved Surface Renewable Solar Cell Applied to Near Space Airship Energy System .........................2621
J. Su, B. Song
Research on Dynamic Stability of Hybrid Wind/PV System Based on Micro-Grid ...............................2627
W. Deng, X. Tang, Z. Qi
Design and Implementation of A Solar Array Simulator ..........................................................................2633
K. Wang, Y. Li, J. Rao, M. Sun
Design and Control of a Novel Module Integrated Converter with Power Pulsation
Decoupling for Photovoltaic System ............................................................................................................2637
C. Zhang, X. He, D. Zhao
Simulation and Design of Intelligent Wind Solar Generation System Based on EWB ...........................2640
F. Zhang, E. Shang, Y. Wang
Design and Research on Two-Loop Control Strategy of PV Grid-Connected Inverter with
LCL Filter......................................................................................................................................................2644
F. Liu, Y. Zhou, J. Yin, S. Duan
Energy Management of Multi-Energy Hybrid BIPV System....................................................................2650
B. Liu, S. Duan
Experience on 10kW Grid-connecting Solar Power Station......................................................................2654
J. Wang, J. Jiang
Research on an Improved Active Frequency Drift Method for the Grid-Connected AntiIslanding Detection........................................................................................................................................2657
B. Y. Ren, X. Q. Tong, X. D. Sun, Y. R. Zhong
Test and Evaluation of Lighting System in High-Frequency AC Microgrids..........................................2661
H. Xu, Y. Wang, D. Pan, T. A. Lipo, L. Kong
Modelling and Simulation of the Microsources Within a Microgrid........................................................2667
D. Yubing, G. Yulei, L. Qingmin, W. Hui
MPPT Control Method of the Seaflow Energy Generation by Using Fuzzy Controller in a
Boost Converter.............................................................................................................................................2672
C. K. Kim, Y. S. Kim
Fuel Cell and Battery Hybrid Supplied Power System..............................................................................2676
W. T. Yan, L. S. Yang, C. M. Hong, T. J. Liang, J. F. Chen, H. T. Yang
Dynamic Model of an FC- and UC-Based IPT System for Railway Vehicle............................................2681
K. H. Han, B. S. Lee, H. J. Park, S. Y. Kwon, S. H. Baek
A Novel Islanding Detection Method of Distributed Generator Based on Wavelet
Transform ......................................................................................................................................................2686
Y. Zhu, Q. Yang, J. Wu, D. Zheng, Y. Tian
Economic Incentive Mechanism of Renewable Energy Generation .........................................................2689
L. Ying, C. Yin, R. Yuan, H. Yong
Model and Control for Supercapacitor-Based Energy Storage System for Metro Vehicles ..................2695
Y. Zhang, L. Wu, X. Hu, H. Liang
Push-Pull Forward Three-Level Converter for High-Voltage Fuel Cell Applications ...........................2698
Z. Yao, L. Xiao, Y. Huang, W. Yang
Experimental Study on Electrode Potential Drop in Liquid Metal Magnetohydrodynamic
Generator.......................................................................................................................................................2704
Y. Xu, R. Li, L. Zhao, Z. Lin, B. Liu, J. Li, Y. Peng, C. Sha, W. Wei
The Research and Application of the Optimal Operation Based on Improved Genetic
Algorithm for Small Hydropower Stations in ShaoGuan..........................................................................2707
L. Ye, Y. Zhang, C. Xia, W. Hu, L. Chen
Regenerative Braking Control Strategy for Fuel Cell Hybrid Vehicles Using Fuzzy Logic...................2712
X. Li, L. Xu, J. Hua, J. Li, M. Ouyang
A Novel Energy Saving Control System for Elevator Based on Supercapacitor Bank Using
Fuzzy Logic....................................................................................................................................................2717
Z. Li, Y. Ruan
Study on Selftuning-Weight EMAP Model Applied in Collaborative Operation of
Renewable Power Generation System.........................................................................................................2723
L. Kong, X. Tang, Z. Qi
Economic Analysis of EDLC/Battery Hybrid Energy Storage..................................................................2729
X. Tang, Z. Qi
Research of Energy Management System of Distributed Generation Based on Power
Forecasting.....................................................................................................................................................2734
C. Changsong, D. Shanxu, Y. Jinjun
Analysis of Novel Rotating Electromagnetic Heater Based on the Concept of the Third
Function of Rotational Motor ......................................................................................................................2738
Y. Pei, F. Chai, Y. Yu, L. Chen, S. Cheng
A New Adaptive Active Frequency Drift Method for Islanding Detection of GridConnected Inverters......................................................................................................................................2742
Z. Chun-jiang, W. Xiaohuan, M. Hui-ying, Z. Xiu-bo, X. Dian-guo
Research on Digital Implementation of Proportional-Resonant Controller Based on a
Three-Phase PV Grid-Connected System ...................................................................................................2746
Z. Yan, D. Shanxu, L. Fei, Y. Jinjun
A New Method to Optimize q-axis Voltage for Deep Flux Weakening Control of IPM
Machines Based on Single Current Regulator............................................................................................2750
L. Xu, Y. Zhang, M. K. Guven
Key Technologies of Large and Medium Power Electromechanical Energy Conversion
under Extreme Operating Conditions.........................................................................................................2755
M. Weiming, W. Dong
Influence of Transient Current to PM-AC Motor Driven By BLDC Mode.............................................2761
C. Bi, C. S. Soh
PM Machine Comparison Used in Vehicle with Different On-Board Voltage Level ..............................2767
G. Ombach, J. Junak
Comparison of Permanent Magnet Brushless Motors Designed for Automated Manual
Transmission (AMT) Systems ......................................................................................................................2773
J. Junak, G. Ombach
Comparative Study of Electromagnetic Performance of Alternative Halbach and
Conventional Radially Magnetized Permanent Magnet Brushless Motors .............................................2778
Z. Q. Zhu, Z. P. Xia, D. Howe
A Wide Range Speed Control Method of Compact High Speed BLDCM using PLL
Approach........................................................................................................................................................2784
D. H. Lee, J. W. Ahn
Researches on Behavior of Vibration in Axial Flux Permanent Magnet Synchronous Motor...............2789
S. Yu, L. Wang, Y. Cao, X. Qu, W. Wang, Z. Song, Q. Li, J. Chen, R. Tang
Performance Analysis on Opposite-Rotation Dual Mechanical Ports PMSM.........................................2792
G. Liu, F. Zhang, X. Liu
Key Technology Research of BLDCM for High Performance Driving System.......................................2797
W. Liu, Y. Huangfu, G. Luo
Stator-Permanent Magnet Brushless Machines: Concepts, Developments and Applications................2802
M. Cheng, W. Hua, X. Zhu, X. Kong, J. Zhang, W. Zhao
A Switched-Reluctance Motor/Generator for Mild Hybrid Vehicles .......................................................2808
P. A. Watterson, W. Wu, B. A. Kalan, H. C. Lovatt, G. Prout, J. B. Dunlop, S. J. Collocot
Synthesis of Dimensionless Indexes for IPM Machine in Variable Speed Operations............................2814
L. Xu, T. Fan, X. Wen
Influence of Eddy Currents on Resonance-Based Position Estimation of Switched
Reluctance Drives..........................................................................................................................................2820
K. R. Geldhof, A. V. D. Bossche, J. A. A. Melkebeek
Comparative Study of Alternative Permanent Magnet Linear Oscillating Actuators............................2826
X. Chen, Z. Q. Zhu, D. Howe, J. S. Dai
Analysis of the Magnetomotive Force of a Three-Phase Winding with Concentrated Coils
and Different Symmetry Features ...............................................................................................................2832
D. Gerling
The Magnetic Field Calculation and Analysis of an Air-Core Compulsator ...........................................2838
C. Ye, K. Yu, G. Zhang, Y. Pan
Comparison of Outer-Rotor Stator-Permanent-Magnet Brushless Motor Drives for
Electric Vehicles ............................................................................................................................................2842
K. T. Chau, C. Liu, J. Z. Jiang
Characteristics Comparison Between SPMSM and IPMSM Under High Flux Density
Condition by Both Experimental and Analysis Results .............................................................................2848
K. Akatsu, K. Narita, Y. Sakashita, T. Yamada
Influence of Skew and Cross-Coupling on d- and q-Axis Inductances and Flux-Weakening
Performance of PM Brushless AC Machines..............................................................................................2854
G. Qi, J. T. Chen, Z. Q. Zhu, D. Howe, L. B. Zhou, C. L. Gu
A Novel and Easy-Realizing Initial Rotor Position Detection Method and Speedup
Algorithm for Sensorless BLDC Motor Drives...........................................................................................2860
M. Lin, Z. Zhang, K. Lin
Numerical Magnetic Field Analysis and Parameter Computation of a PM Synchronous
Generator.......................................................................................................................................................2866
Y. Guo, Y. Dou, J. Zhu, H. Lu, J. Jin
Reduction of Harmonic Iron Losses in Interior Permanent Magnet Motors by
Optimization of Rotor Structures ................................................................................................................2870
K. Yamazaki, H. Ishigami
Comparison of Performance of a Closed Loop PMSM Drive System with Modified
Predictive Current and Hysteresis Controllers ..........................................................................................2876
A. Lekshmi, R. Sankaran, S. Ushakumari
Design of a Fault Tolerant Permanent Magnet Machine for Airplanes ...................................................2882
J. Wolmarans, H. Polinder, J. A. Ferreira, D. Clarenbach
Investigation of Line Start Permanent Magnet Synchronous Motors with Interior-Magnet
Rotors and Surface-Magnet Rotors.............................................................................................................2888
P. W. Huang, S. H. Mao, M. C. Tsai, C. T. Liu
Fundamental Study on a Novel Transverse Flux Permanent Magnet Linear Machine .........................2894
Z. Ji-bin, W. Qian
Study of Techniques for Reducing the Cogging Torque in Permanent Magnet Motors ........................2899
X. Wang, Y. Yang, D. Wang, T. Ding
Optimal Combination of Stator and Rotor Pole Numbers in Flux-Switching PM Brushless
AC Machines .................................................................................................................................................2905
J. T. Chen, Z. Q. Zhu, A. S. Thomas, D. Howe
The Capacitor Matching Problem in the Single-Phase Line-Start Permanent Magnetic
Synchronous Motor.......................................................................................................................................2911
S. Jing, H. Jianhui, Z. Shufang
Compound-Structure Permanent-Magnet Synchronous Machine Used for HEVs ................................2916
P. Zheng, R. Lin, Q. Wu, C. Tong, Z. Tang
Saliency Ratio Optimization in an IPM Machine with Fractional-Slot Concentrated
Windings ........................................................................................................................................................2921
L. Chong, M. F. Rahman
Drive System of Single Side Linear Induction Motors...............................................................................2927
L. Yaohua, R. Jinqi
Novel Position Estimation for Switched Reluctance Motor Based on Space Vector of Phase
Inductance......................................................................................................................................................2932
A. Komatsuzaki, Y. Miura, I. Miki
Analysis and Design of a Novel Power Converter for Four Phase Switch Reluctance Motor
Based on Double IPMS .................................................................................................................................2938
D. Wang, X. Wang, Y. Yang, X. Mu
Novel Force Ripple Reduction Method for a Moving-Magnet Linear Synchronous Motor
with a Segmented Stator ...............................................................................................................................2942
J. M. M. Rovers, J. W. Jansen, E. A. Lomonova
Novel Linear Flux-Switching Permanent Magnet Machines.....................................................................2948
Z. Q. Zhu, X. Chen, J. T. Chen, D. Howe, J. S. Dai
Robot Architecture for a Contactless Industrial Pick-and-Place Machine..............................................2954
J. J. H. Paulides, L. Encica, J. W. Jansen, R. A. J. V. D. Burg, J. L. Horijon, E. A. Lomonova
Analysis of Forces in Combined Levitation-and-Propulsion SLIM System ............................................2960
L. Shi, H. Zhang, K. Wang
Optimal Design and Dynamic Characteristic Analysis of a New Type Electric Actuator for
High Voltage Circuit Breaker ......................................................................................................................2964
H. K. Jung
Reduction Effect of Suspension Input Power Using Rotor Eccentricity in a Bearingless
Motor..............................................................................................................................................................2968
H. Hara, M. Takemoto, Y. Tanaka, A. Chiba, T. Fukao
Hybrid Excitation Machines with Powdered Iron Core for Electrical Traction Drive
Applications ...................................................................................................................................................2974
T. Kosaka, N. Matsui
Torque Ripple Reduction in the Flux Reversal Motor by Rotor Pole Shaping and Stator
Excitation .......................................................................................................................................................2980
G. Vakil, P. Upadhyay, N. Cheth, A. Patel, A. Tiwari, D. Miller
Flux-Switching PM Brushless Machines with Alternative Stator and Rotor Pole
Combinations.................................................................................................................................................2986
A. Thomas, Z. Q. Zhu, G. W. Jewell, D. Howe
An Electric Assist Bicycle Drive with Automatic Continuously Variable Transmission ........................2992
P. A. Watterson
Design of Two-Phase Hybrid Stepping Motor Driver with Current Closed-Loop Control
Based on PIC18F2331 ...................................................................................................................................2998
R. Zhang, X. Wang, Y. Yang, D. Qiao
Dynamic Characteristics Analysis of Magnetic Bearing for High Speed Machine Based on
Field–Circuit Coupling Method ...................................................................................................................3002
J. Xing, F. Wang
Feedback Linearization Control for a Hybrid Magnet Levitation System ..............................................3006
L. Shi, H. Zhang
Hybrid Excitation Machine with Isolated Magnetic Paths........................................................................3010
Q. Zhang, S. Huang, X. Ding
Analysis of the Commutation Currents for a Sinusoidal BLDC Motor ...................................................3016
M. Markovic, A. Hodder, Y. Perriard
Cogging Torque Reduction of Flux-Switching Permanent Magnet Machines Without
Skewing ..........................................................................................................................................................3020
W. Hua, M. Cheng
A New Model of Vector-Controlled Doubly-Salient Permanent Magnet Motor with Skewed
Rotor...............................................................................................................................................................3026
W. Hua, M. Cheng
A New Stator-Flux Orientation Strategy for Flux-Switching Permanent Motor Drive
Based on Voltage Space-Vector ...................................................................................................................3032
H. Jia, M. Cheng, W. Hua, W. Zhao, W. Lu
Basic Characteristics of a 4kW Permanent-Magnet Type Bearingless Slice Motor for
Centrifugal Pump System.............................................................................................................................3037
Q. Li, P. Boesch, M. Haefliger, J. W. Kolar, D. Xu
Harmonic Analysis and Comparison of the Back EMFs of Four Permanent Magnet
Machine with Different Winding Arrangements........................................................................................3043
A. Chen, R. Nilssen, A. Nysveen
Module of Permanent Magnet Brushless Motor Based on Voltage Switch Function .............................3049
Z. Zhang, W. Shi, J. Gong, S. Huang
A 200 000 rpm, 2 kW Slotless Permanent Magnet Motor .........................................................................3054
P. D. Pfister, Y. Perriard
Analyzing on Structure Parameters for Low-Speed Permanent Magnet Synchronous
Generator.......................................................................................................................................................3060
Q. He, X. Bao, Q. Wang
Halbach Array Magnet and Its Application to PM Spherical Motor.......................................................3064
H. Li, C. Xia
Exploring and Modeling on Constant Speed Control Strategy of Permanent Magnet
Synchronous Motor for Direct Drive System .............................................................................................3070
X. H. Zhao, X. Y. Feng, Y. H. Liao, X. Y. Yu, W. S. Song
Sensorless Vector Control System of Permanent Magnet Synchronous Motors Based on
Adaptive and Fuzzy Control ........................................................................................................................3074
H. Lin, S. Chen, J. Yao, M. Tsuji
A Sensorless Speed Control of an IPMSM using the Observers with the Adaptive Structure...............3079
Y. J. Kim, H. S. Kang, Y. S. Kim
Research on Rotor Harmonic Copper Losses of Line-Start REPMSM Based on FEM .........................3085
R. Fu, M. Dou
A Study on the Starting Characteristics in Single-Phase Line-Start Permanent Magnet
Motor..............................................................................................................................................................3090
J. B. Yun, S. J. Kim, J. Y. Park, J. B. Im, J. Lee
The Analyses and Prediction of An HighAccurate No Linear Inductance Analysis
Formulation of Six-Phase Ten-Pole Fault-Tolerant Permanent Magnet Machine..................................3094
H. Zhang-yang, H. Yu-wen, H. Xiao-ge, H. Wen-xin, L. Yong
A Comparative Analysis of Two Kinds of Poles for Washing Machine’s IPMSM with the
Same Torque and Output Power .................................................................................................................3099
C. H. Cho, C. S. Jin, I. S. Jang, S. B. Lim, J. Lee
The Study and Modeling of Multi-Phase PMSM Variety Speed System with High FaultTolerant..........................................................................................................................................................3102
J. Zhu, H. Zhang, R. Tang
Basic Concept of an Analytical Calculation Method and Some Test Results for
Determination of Constant of Line Start Permanent Magnet Motor .......................................................3108
K. Tsuboi, I. Hirotsuka, T. Takegami, M. Nakamura
Using Mathematical Method of Torque Simulation for Reducing Calculation Time of
Permanent Magnet Spherical Wheel Motor ...............................................................................................3112
C. H. Cho, D. Kang, S. Y. Kim, S. H. Won, J. Lee
Study on Optimization Design of the Main Electromagnetic Parameters of Permanent
Magnet Synchronous Motor.........................................................................................................................3116
G. Zhou, J. Wang, L. Ren, T. Ding
The Design of Rotor and Notch to Improve the Operation Characteristics in Spoke Type
BLDC Motor..................................................................................................................................................3121
K. K. Han, D. Y. Lee, G. H. Kang, K. B. Jang, H. K. Shin
A Study on the Improvement of Dynamic Characteristics in Interior Permanent Magnet
Motor by Rotor Shape Design......................................................................................................................3126
B. C. Yun, K. K. Han, D. Y. Lee, G. H. Kang, K. B. Jang, H. K. Shin, G. T. Kim
Investigation and Comparison of Inductance Calculation Methods in Interior Permanent
Magnet Synchronous Motors .......................................................................................................................3131
T. Sun, S. Kwon, S. H. Lee, J. P. Hong
A Study on the Reducing of Cogging Torque of IPMSM ..........................................................................3137
K. J. Park, D. S. Jung, H. S. Chang, J. N. Bae, J. Lee
A Novel Control Method for Reducing Torque Ripple in PMSM Applied for Electric
Power Steering...............................................................................................................................................3142
S. H. Lee, G. H. Lee, S. I. Kim, J. P. Hong
Design Criteria and Electromagnetic Analysis of a High-Speed Permanent Magnet
Synchronous Machine...................................................................................................................................3146
S. M. Jang, K. J. Ko, J. H. Park, S. H. Lee
Performance Analysis of Permanent Magnet Machines Considering Magnetic Losses
Based on Analytical Parameter Estimation ................................................................................................3152
S. M. Jang, J. Y. Choi, K. J. Ko, I. J. Kim, H. K. Sung
Investigation on Core Loss According to Stator Shape in Interior Permanent Magnet
Synchronous Motor.......................................................................................................................................3158
S. J. Lee, S. I. Kim, J. P. Hong
Thermal Analysis Using Equivalent Thermal Network in IPMSM..........................................................3162
D. J. Kim, J. W. Jung, S. O. Kwon, J. P. Hong
Speed Control of PMSM Based on Energy-Shaping and PWM Signal Transformation
Principle .........................................................................................................................................................3166
H. Yu, Z. Zou, Y. Tang
Design and Analysis on Permanent-Magnet BLDC Motor for Automatic Door.....................................3171
G. Liu, H. Zhang
The Effect of Dispersibility of Permanent Magnetic Materials on Performances of Line
Start Permanent Magnet Synchronous Motors..........................................................................................3177
Y. Yang, X. Wang, T. Ding, C. Huang
Electromagnetic Coupling Analysis of Uniform Magnetic-Filed Permanent Magnet Dual
Mechanical Port Machine.............................................................................................................................3181
G. Xizheng, F. Tao, W. Xuhui, Z. Feng
Design of Rotor Position Detecting Circuit with Band-Pass Filters in Sensorless BLDC
Motor Drives..................................................................................................................................................3185
L. Qiang, C. Yongjuan, W. Ruixia
Cogging Torque Reduction by Combining Teeth Notching and Rotor Magnets Skewing in
PM BLDC with Concentrated Windings ....................................................................................................3189
Bin Zhang, X. Wang, R. Zhang, X. Mou
Calculation of Winding Voltage of Permanent Magnet Synchronous Generator Based on
Tooth Flux Method .......................................................................................................................................3193
S. Huang, L. Wang, Y. Xia
Analysis of Flux Control for the IPMSM Used in the Power Generation ................................................3197
L. Ma, J. Jiang, F. Tang, L. Zhan, X. Jin
Design and Magnetic Field Analysis of a Dual-Rotor Permanent-Magnet Synchronous
Wind Generator ............................................................................................................................................3202
J. Cao, X. Yang
Four Switch Three Phase Inverter Fed PMSM DTC System with Nonlinear Perpendicular
Flux Observer and Sliding Mode Control...................................................................................................3206
B. Wang, Y. He, Y. B. Ivonne
Analysis of the Magnetic Field of the Six-Phase Disc PMSM and Effect of Air Gap Length
on the Air Gap Magnetic Field.....................................................................................................................3212
X. Wang, Q. Wang, Y. Wang
Magnet Demagnetization Observation for Permanent Magnet Synchronous Motor .............................3216
X. Xi, C. Changming, Z. Meng
Experimental Research on New-Type of Transverse Flux Permanent Magnet Machine for
Electric Vehicle..............................................................................................................................................3220
J. Cheng, X. Tu, C. Gu
Calculation of Big Air-Gap Magnetic Field in Poly-Phase Multi-Pole BLDC Motor .............................3224
G. Meng, H. Li, H. Xiong
The Series Structure Dual-Rotor PMSM Design Based on Phase-Shifting Winding..............................3228
J. Xia, T. Dong, C. Wang, R. Jing
Optimal Design and Experimental Verification of a Line-Start Permanent Magnet
Synchronous Motor.......................................................................................................................................3232
G. Yang, J. Ma, J. X. Shen, Y. Wang
Analysis of the Iron Loss of Line Start Permanent Magnet Synchronous Motor Using
Time-Stepping Finite Element Method .......................................................................................................3237
J. Hu, Y. Luo, M. Liu, X. Liu
Design and Analysis of Double-Stator Permanent Magnet Brushless Motor for Hybrid
Electric Vehicles ............................................................................................................................................3241
Y. Wang, M. Cheng, Y. Fan, K. T. Chau
The Effect of Magnet Thickness on Maximum Levitation Force in Surface Permanent
Magnet Synchronous Bearingless Motor ....................................................................................................3247
Y. Xin-ping, W. Hua, H. Song, Q. Li-ping
Research on the Axial-Radial Flux Compound-Structure Permanent-Magnet Synchronous
Machine (CSPMSM) Used for HEV............................................................................................................3250
H. Zhao, L. Li. P. Zheng, R. Liu, J. Zhao
Speed Regulation of Wider Range for Rare Earth Permanent Magnet Brushless DC Motor ...............3254
R. Ma, Y. Huangfu, P. Fan
Analysis on Fast Reclosing of Line Start Permanent Magnet Motor with Time-Stepping
Finite Element Method .................................................................................................................................3257
L. Yingli, L. Zhiqiang, L. Mingji, Z. Lifang
Comparison and Study of 6/5- and 12/10-Pole Permanent Magnet Flux-Switching Motors
Considering Flux-Weakening Capability....................................................................................................3262
Y. Wang, Z. W. Huang, J. X. Shen, C. F. Wang
Control of a BLDC Motor for Electromechanical Actuator .....................................................................3266
Y. Xu, Y. Tang, J. Zhu, J. Zou, C. Ma
Pull Out Torque Computation for Line Start Permanent Magnet Motor ...............................................3270
L. Zhiqiang, L. Yingli, L. Xiaofang, Z. Jian
Low Speed High Torque PMSM Design Based on Unequal Teeth Structure..........................................3274
J. Xia, T. Dong, C. Wang, J. Zhao
Interior Permanent Magnet Synchronous Motor Design for Improving Self-Sensing
Performance at Very Low Speed .................................................................................................................3278
S. Wu, D. D. Reigosa, Y. Shibukawa, M. A. Leetmaa, R. D. Lorenz, Y. Li
Calculation and Analysis of High-Speed Permanent Magnetic Generator Unilateral
Magnetic Force ..............................................................................................................................................3284
L. Weili, T. Li, Z. Xiaocheng, G. Jiaming
Study on the Permanent Magnet Reduction Design in Single-Phase Line-Start Permanent
Magnet Motor for Household Appliance ....................................................................................................3289
L. Fang, B. H. Lee, J. P. Hong, H. Nam, S. H. Ha
Calculation on Parameters of Multi –Segment PM Motor with Composite Magnetic
Circuit in Rotor Based on 3D FEM .............................................................................................................3293
Q. Zhao, H. Zhao, C. Ma, Z. Li, S. Zhang
Optimal Design of Outer Rotor Permanent Magnet Machine Using Improved Particle
Swarm Optimization.....................................................................................................................................3297
S. Y. Lee, J. H. Seo, S. Y. Kwak, C. G. Lee, S. Y. Jung, H. K. Jung
Iron Loss Calculation of PM Motor by Coupling Analysis Between Magnetic Field
Simulator and Control Simulator ................................................................................................................3301
K. Narita, T. Yamada, Y. Sakashita, K. Akatsu
Design and Optimization of Servo Permanent Magnetic Synchronous Motor........................................3307
F. Youjing, C. Wanli, Y. Kai, G. Chenglin
Study of Dead-Time Compensation on Direct Torque Control of ALA Rotor Motor ............................3311
L. Q. Zhou
Dynamic Modeling and Control for a Switched Reluctance Starter/Generator System ........................3315
W. Ding, D. Liang
Sensorless Control of Switched Reluctance Motor for Three-Phase Full-Bridge Inverter
Drive ...............................................................................................................................................................3321
S. Kachapomkul, P. Somsiri, N. Chayopitak, K. Tungpimolrut, R. Pupadubsin, P. Jitkreeyan
An Adaptive Low-Ripple Torque Control of Switched Reluctance Motor for Small Electric
Vehicle ............................................................................................................................................................3327
N. Chayopitak, R. Pupadubsin, K. Tungpimolrut, P. Somsiri, P. Jitkreeyan, S. Kachapornkul
Simple Predictive Delta-Modulation Current Regulator for Switched Reluctance Motor
Drive ...............................................................................................................................................................3333
R. Pupadubsin, P. Somiri, N. Chayopitak, K. Tungpimolrut, P. Jitkreeyan, S. Kachapornkul
Torque Compensation for Switched Reluctance Drives ............................................................................3338
K. Tungpimolrut, R. Pupadubsin, N. Chayopitak, S. Kachapornkul, P. Jitkreeyarn, P. Somsiri
Control Mode Conversion Considering Nonlinear Inductance Parameter in the Single
Phase Switched Reluctance Motor...............................................................................................................3343
B. Ahn, S. Go, I. Cho, H. Chang, J. Lee
Novel Active Boost Power Converter for SR Drive....................................................................................3347
J. Liang, S. H. Seok, D. H. Lee, J. W. Ahn
Novel Passive Boost Power Converter for SR Drive with High Demagnetization Voltage.....................3353
D. H. Lee, J. Liang, T. H. Kim, J. W. Ahn
Basic Characteristics of Electric Vehicle Using 40kW Switched Reluctance Motor...............................3358
S. Aida, A. Komatsuzaki, I. Miki
Fourier Series and ANFIS-Based Modeling and Prediction for Switched Reluctance Motor................3362
W. Ding, D. Liang
A Design of Transverse Flux Switched Reluctance Motors With Permanent Magnet Shield................3367
S. Qu, H. Li, X. Ma
Design of a Novel Switched Reluctance Planar Motor...............................................................................3370
C. Ma, Z. Wang, G. Li, Y. Chen, X. Liu
SRM Torque Ripple Minimization Based on Modified Multi-Level Converter......................................3374
Z. Li, Y. Wang, H. Qi, J. W. Ahn
Study for Generating Operation of Three-Phase Fully-Pitched Winding Switched
Reluctance Machine ......................................................................................................................................3380
J. Sun, S. Wang, Z. Wei, Q. Zhan, Z. Ma, T. Yang
Maximization of Starting Torque of a Three-Phase 6/2 Switched Reluctance Motor for
Super High Speed Drive ...............................................................................................................................3385
Q. Zhou, C. Liu, W. Zeng, D. Liu
Direct Torque Control of Switched Reluctance Motors ............................................................................3389
G. Song, Z. Li, Z. Zhao, X. Wang
Research on Switched Reluctance Double-Rotor Motor Used for Hybrid Electric Vehicle...................3393
S. Cui, Y. Yuan, T. Wang
Regenerative Braking Control Strategies of Switched Reluctance Machine for Electric
Bicycle ............................................................................................................................................................3397
X. Liu, C. Liu, M. Lu, D. Liu
A Current Control Method of Switched Reluctance Motors Based on Iterative Learning
Control Considering the Mutual Inductance..............................................................................................3401
Y. Zheng, H. Sun, Y. Dong, P. Li
Mutual Coupling and Its Effect on Torque Waveform of Even Number Phase Switched
Reluctance Motor ..........................................................................................................................................3405
B. Qu, J. Song, T. Liang, H. Zhang
The Model of Nonlinear Radial Force in Switched Reluctance Motor Based on Radial
Basis Function Neuron Network ..................................................................................................................3411
W. Weibing, W. Honghua, L. Jiyong
Analytical Design and Modeling of Transverse Flux Switched Reluctance Machine .............................3414
H. Yang, C. Gu
Studies to Decrease Cogging Force and Pulsating Thrust in the Prototype Linear
Permanent Magnet Vernier Motor..............................................................................................................3417
S. Shimomura, M. Fujieda, K. Hoshino
Experimental Study on Identification of the Parameters on? α-β Axis of LIM by DC Decay
Testing Method..............................................................................................................................................3423
R. Nakata, H. Kubota
A Study on the Optimal Barrier Design for High Efficiency of LSPM ....................................................3427
B. L. Ahn, W. H. Kim, B. S. Kim, K. C. Ko, J. Lee
Study on Minimizing the Detent Force of PM Linear Brushless DC Motors ..........................................3430
S. Wang, X. Wang, X. Xu, J. Cao
A Novel Adaptive Genetic Algorithm Applied to Optimizing Linear Induction Machines....................3435
Y. C. Zhuang, H. T. Yu, M. Q. Hu, J. Xia
Analysis and Study Thrust Ripple of PMSLM...........................................................................................3439
Z. Jinghong, Z. Xiaofeng, Z. Junhong
Analysis of Detent Force in a Discontinuous Primary Type Permanent Magnet Linear
Synchronous Motor.......................................................................................................................................3443
J. K. Si, X. D. Wang, H. Chen, S. Y. Yuan, L. C. Jiao
Research on Thrust Ripples Elimination Technique for Double Sided PM Linear Motor ....................3449
G. Zianguo, Y. Ming, X. Dianguo
Electromagnetic Analysis of a Permanent Magnet Linear Synchronous Motor .....................................3453
L. Zheng, J. Jin, Y. Guo, J. Zhu
Dynamic Characteristic Analysis of High Speed Long Primary Block Feeding Linear
Induction Motor ............................................................................................................................................3459
J. Lu, W. Ma
Study and Optimized Design of Stator Core Structure in Single-Sided Linear Induction
Motor..............................................................................................................................................................3464
J. Han, Y. Du, Y. Li, N. Jin, T. Zhou, W. Xu
The Suspension System Design of Linear Induction Motor Based on Hybrid Excitation
Principle .........................................................................................................................................................3470
F. Li, H. TaoYu, Y. C. Zhuang, Q. Gao, M. Q. Hu
A Novel Traction and Normal Forces Study for the Linear Induction Motor.........................................3474
Z. Yang, J. Zhao, T. Q. Zheng
Performance Calculation for Double-Sided Linear Induction Motor with Short Secondary ................3478
T. Yang, L. Zhou, L. Li
Toroidal Motor ..............................................................................................................................................3484
D. Zheng, L. Xu
Starting Performance Analysis of Three-Phase Capacitor Motor for Beam Pumping Unit ..................3489
S. Xiong, B. Yang, G. Ni
Research and Optimal Design on Hybrid Excitation Claw-Pole Alternator for Automobile
Application.....................................................................................................................................................3493
X. Bao, Q. He, Q. Wang, Y. Ni
Architecture and Principle of a Novel Coordinate Structure Hybrid Excitation
Synchronous Machine...................................................................................................................................3497
Z. Zhang, J. Zhou, D. Zhu, Y. Yan
A Study on the Design and Analysis of Double Cylinder Motor ...............................................................3501
C. S. Park, H. J. Lee
A Novel SHEPWM Scheme for Reducing Torque Pulsation of Dual Three-Phase Induction
Motors ............................................................................................................................................................3505
W. Tiejun, C. Yongbing, S. Chaolong, J. Xiaoyi
On Hybrid Excitation Claw-Pole Synchronous Generator with Magnetic Circuit Series
Connection .....................................................................................................................................................3509
D. Zhang, C. Zhao, L. Zhu, Y. Ding, C. Yu, C. Tian
A Study of Cooling Magnet-Wire of the Brushless DC Motor for Car Air Conditioner ........................3514
T. Naruta, Y. Akiyama, Y. Niwa
Research and Development of the Electric Supercharger for Minivehicles.............................................3518
Y. Niwa, T. Naruta, Y. Akiyama
Analysis on a Novel Doubly Salient Machine..............................................................................................3522
Z. Chen, N. Zhou, X. Meng
Exploring Suitable Applications for Doubly-Fed Asynchronous Machines.............................................3526
D. Aguglia, R. Wamkeue, P. Viarouge, J. Cros
Research on Ultrasonic Motor with Orthogonal Synchronization ...........................................................3532
X. Qian, X. Wang
Analysis the Electromagnetic Torque and Magnetic Field of the Axial and Radial Air Gap
Hybrid Magnet Circuit Multi-Coupling Motor..........................................................................................3536
J. Y. Han, S. K. Cheng
Analysis of Permanent Magnet Type Stepping Motor with Claw Poles Using
Electromagnetic Field Analysis....................................................................................................................3539
T. Hattori, Y. Suzuki, T. Yamada
Design, Fabrication and Experiment of Iron-Core Passive Compulsator................................................3544
S. Wu, S. Cui, L. Song, M. Liu
Study on the Structure and Flux Regulation Performance of a Novel Hybrid Excitation
Synchronous Generator................................................................................................................................3549
Z. Jibin, F. Xinghe
Design And Study Of Novel Transverse Flux Permanent Magnet Synchronous Motor.........................3554
L. Chen, B. Li, C. Liu, R. Tang
Optimization of Asymmetric Permanent Magnetic Synchronous Motor for Cogging
Torque Minimization Using Finite Element Method .................................................................................3559
H. Feng, X. Wang, X. Xu, Y. Liu
Research on A Novel Combined Permanent Magnet Electrical Machine................................................3564
S. Du, Y. Zhang, J. Jiang
Analyze of Dual-Axle Four Quadrant Transducer Motor Operation Mode............................................3568
W. Shi, Z. Zhang, S. Huang, J. Gong, Y. Kun
The Development Of A New Type Of Doubly-Fed Variable Speed Salient-Pole Generator
And Its Control System.................................................................................................................................3572
Z. Wei, X. Chen
Research on a High Energy Utilization Efficiency Electromagnetic Aircraft Launcher with
an Ultracapacitor Bank ................................................................................................................................3575
H. Zhao, J. Wu
Research on a Visual CAD System of REPM DC Coreless Motor ...........................................................3579
F. Zhaoyang, L. Jinglin, C. Weiwei
Position Controlling for RTWUSM with Diameter 30mm Based on DSP and DDS...............................3584
G. Juping, W. Xinjian, H. Minqiang, J. Long, W. Deming, X. Zhike
Transient Characteristics Analysis for Switching from Starter to Generator of Doubly
Salient Electro-Magnet Starter/Generator .................................................................................................3587
C. Hu, B. Zhou, J. Wei, F. Cheng
Superconducting Inductive Energy Storage Pulsed Current Generator for Electromagnetic
Launcher ........................................................................................................................................................3591
N. Chen, Y. Tang, F. Guo, Z. Liu, Y. Pan
Power Parameters Matching Design of Dual Mechanical Ports Electric Machine with
Clutch Applied in Hybrid Electric Vehicle .................................................................................................3595
G. Xinhua, W. Xuhui, Z. Feng, F. Tao
Pulse Magnetic Traveling Wave Propulsion System Simulation Analysis for
Electromagnetic Launcher ...........................................................................................................................3600
F. Guo, Y. Tang, N. Chen, L. Ren, J. Li, Y. Pan
A Brushless Permanent Magnet Dual Mechanical Port Machine for Hybrid Electric
Vehicle Application .......................................................................................................................................3604
F. Tao, W. Xuhui, X. Shan, K. Liang
The Structural and Characteristic Study on the Novel Parallel Magnetic Path Hybrid
Excitation Synchronous Generator .............................................................................................................3608
K. Xiao, C. Liu, Q. Zhou
Research on Modeling and Several Other Prospective Problems of Dual Rotor Machine.....................3612
T. Pang, S. Huang, X. Chen, S. Wang
The Principle and Mathematic Model of the Brushless Doubly-Fed Electrical Variable
Transmission..................................................................................................................................................3617
X. Chen, S. Huang, T. Pang, S. Wang
The Principle and Harmonic Analysis of a New BDFM with Tooth Harmonic Wound
Rotor Using as a Generator..........................................................................................................................3622
J. Zhang, X. Wang, T. Wu, F. Xiong, C. Kan
The Study of Bypass Hybrid Excitation Synchronous Motors with Extended FieldWeakening Capability ..................................................................................................................................3627
K. Liang, W. Xuhui, X. Shan, F. Tao
Research on Control of Ultrasonic Motor Based on Virtual Instrument .................................................3632
H. Sujuan, X. Zhike, J. Long, H. Minqiang, G. Juping
Direct Power Control of a Permanent Magnet Linear Generator in a Free Piston Energy
Converter .......................................................................................................................................................3636
Y. Lu, X. Huang, Z. Q. Zhu
3-D FEM Analysis of a Novel Structure for Axial-Flux Homopolar Generators Using a
Grain-Oriented Silicon Steel Stator Core ...................................................................................................3640
S. Javadi, M. Mirsalim, J. Sabzivand
Radial Force Characteristics of Multi-Consequent-Pole Bearingless Motor...........................................3644
H. Sugimoto, K. Kamiya, R. Nakamura, J. Asama, A. Chiba, T. Fukao, D. G. Dorrell
Efficiency Improvement of a Doubly Salient-Pole Homopolar Machine with Powder Iron
Core ................................................................................................................................................................3650
K. Nakamura, H. Narushima, J. Asama, A. Chiba, T. Fukao, H. Mitani, H. Hojo, O. Ozaki, K. Inoue
Calculation of Eddy Current Losses in a Solid-Rotor Cage Induction Motor by Finite
Element Analysis ...........................................................................................................................................3656
T. Yang, L. Zhou, W. Jiang
Reduction of the Cogging in the Linear Synchronous Motor with a Claw-Pole-Structured
Mover .............................................................................................................................................................3660
K. Shiroshita, K. Iijima, T. Kichiji, Y. Kataoaka, K. Tashiro, T. Saito, H. Wakiwaka
Cogging Force Analysis of Tubular Linear Permanent Magnet Motors .................................................3665
W. Hong-xing, LiLi-yi, K. Bao-quan
Research for the Diver of Hybrid Excitation Switched Reluctance Motor ..............................................3668
W. Hong-xing, LiLi-yi, K. Bao-quan
Development of Electromagnetic Linear Actuators for Micro Robots (Invited) .....................................3673
J. Zhu, H. Lu, Y. Guo, Z. Lin
Self-Sensing Methods From MEMs to Solar Aircraft Motors ..................................................................3680
Y. Perriard, O. Scaglione, M. Markovic
Effect of Magnetization on Torque Pulsation of the PM BLDC Motor ...................................................3685
H. N. Phyu, C. Bi, Q. Jiang
The Torque Free Phenomenon of Ultrasonic Motors ................................................................................3691
Y. Akiyama, T. Naruta, Y. Yamashima, P. Mosbar
Design and Implementation of an ASIC-Based Four-Axis Position Servo System..................................3697
Y. Liu, T. Li, Z. Zhou, P. Xu
Dynamic Characteristics of Thermoelastic Actuators ...............................................................................3702
I. Dolezel, M. Donatova, P. Karban
Design of A Novel Piezoelectric Inchworm Actuator .................................................................................3707
Z. Zhang, H. Hu
Analysis of Claw-Pole Machine Using Magnetic Circuit Method Applying Fourier Series ...................3712
S. B. Lim, I. S. Jung, Y. K. Kim, J. H. Choi, B. G. Gu
Analysis of a Linear Ultrasonic Motor Using Numerical and Analytic Method......................................3716
K. P. Yi, J. S. Rho, H. K. Jung
Design of Motor Driving 3-Phase Variac Charging System for DNB High Voltage Power
Supply.............................................................................................................................................................3720
D. Tonghai, L. Baohua
The Research on Performances of Interior Permanent Magnet Synchronous Motor with
Different Pole and Slot Combinations .........................................................................................................3724
Chaifeng, G. Hongwei, Y. Yanjun, C. Shukang
Realization of Super-Low Revs Running About AC Servo Motor ...........................................................3728
D. Song, J. Liu
The Application of Gain Scheduling PID and Notch Filter to AC Servo System ....................................3731
J. Wengang, L. Li, D. Fengyan, C. Jianshu
Research on Tracking Performance of Digital Two-loops Position Servo System ..................................3735
F. Teng, Y. Hu, Y. Liu, Y. Li
Coupled Analysis of a 3-Phase Linear Actuator.........................................................................................3740
I. Dolezel, M. Donatova, P. Karban, B. Ulrych
Design of Electromagnetic Force Driving Actuator (EMFA) for Molded Case Circuit
Breaker...........................................................................................................................................................3746
R. E. Kim, J. H. Kang, S. Y. Kwak, H. K. Jung
Study on Performances of Novel Electromagnetic Drive Micromanipulator ..........................................3750
G. Liang, C. Ben-yong
Study on Control Strategy of Rotating Actuator Made by Magnetically Shape Memory
Alloy ...............................................................................................................................................................3754
J. Lu, F. Wang, Y. Shen
Finite Element Analysis of the Uniformity of Magnetic Field for On-Off Giant
Magnetostrictive Actuators ..........................................................................................................................3758
L. Li, C. Zhang, B. Yang, X. Li
Optimal Design of Novel Spatial Bending SMA Actuator Based on Heat Analysis ................................3762
Y. Kai, X. Jianguo, G. Chenglin
Calculation of Equivalent Circuit Parameters of Doubly Fed Induction Generator Based
on Magnetic Field Finite Element Analysis.................................................................................................3767
J. Chai, Z. Zhang
Brushless Traction PM Machines Using Commercial Drive Technology, Part II:
Comparative Study of the Motor Configurations ......................................................................................3772
E. V. Kazmin, E. A. Lomonova, J. J. H. Paulides
Comparison of Parasitic Parameters Extraction Methods and Equivalent Circuits for a
Grounding Model ..........................................................................................................................................3781
Y. Zhong, Z. Zhao
Quasi-Continuous High Order Sliding Mode Controller Design for PMSM...........................................3785
Y. Huangfu, W. Liu, S. Laghrouche, A. Miraoui
SPWM Modulation Strategy Study of AC/DC Matrix Converter with High Frequency
Isolation..........................................................................................................................................................3789
Y. Zhaoyang, Z. Kun, J. Minli, W. Weiyang
Novel Design Method of a Multi-Section Transmission-Line Transformer Using Genetic
Algorithm Techniques ..................................................................................................................................3793
C. Ming
Derivation of a Novel State-Space Formulation of 2-D Frequency Transformation by LFT
Techniques .....................................................................................................................................................3797
N. Shiratori, S. Yan, L. Xu
Brushless Traction PM Machines Using Commercial Drive Technology, Part I: Design
Methodology and Motor Design...................................................................................................................3801
E. V. Kazmin, E. A. Lomonova, J. J. H. Paulides
An Improved Dynamic Model for the Simulation of Three-Phase Induction Motors with
Deep Rotor Bars ............................................................................................................................................3810
D. Lin, P. Zhou
Kinetic Model of Three Degree-of-Freedom Traveling Wave Type Ultrasonic Motor...........................3815
P. Fu, J. Guo
Modeling and Simulation of Tooth-Belt-Driven Industry Servo System .................................................3821
X. Gong, Z. Li, W. Qian
Analytical Modeling of Permanent Magnets on a Soft Magnetic Support for a Suspension
System ............................................................................................................................................................3825
J. L. G. Janssen, J. J. L. Paulides, L. Encica, E. Lomonova
Modeling and Performance Evaluation of 2DOF Spherical Traveling-Wave Type
Ultrasonic Motor ...........................................................................................................................................3831
X. Hu, J. Guo, R. Shen
Modeling of Photovoltaic Power Plants.......................................................................................................3835
Z. A. Zakaria, B. C. Chen, M. O. Hassan
Simulation of High Pulse Power Circuit Based on Semiconductor Switch RSD in SABERSimulink Co-Simulation Environment and Experiment ...........................................................................3840
P. Yabin, Y. Yuehui, L. Lin, S. Chao, L. Jianchao, W. Yubin
Principle and Simulation Analysis of a Novel Structure Magnetic Gear .................................................3845
L. Yong, X. Jingwei, P. Kerong, L. Yongping
Hybrid Modeling Techniques for Power Electronics Based on Petri Net ................................................3850
R. Zhang, S. Fan, J. Chen
Research on Electric Mesh Grid for Seawater Desalination Based on Capacitive
Deionization ...................................................................................................................................................3854
S. Cheng, H. Gong, L. Cuiping, B. Guo, P. Zhang
Modeling of a Novel Quantum Series Resonant Inverter ..........................................................................3858
J. Wu, W. Wu, M. Dai, Y. Zhu, Z. Yan
Dynamic Modeling and Nonlinear Decoupled Control of Back-to-Back Voltage Source
Converter .......................................................................................................................................................3862
Y. Gan-gui, J. Gui-qiang, M. Gang, L. Jun-hui, C. Tao, H. Ya-feng, W. Jian
Build and Validation of RTDS Model for Control and Protection System Testing of
Lingbao BTB DC Converter Station ...........................................................................................................3867
L. Qian, Q. Zhong, Y. Ma, Y. Tao, Z. Cao
Study on the Excitation Condition of Compensated Pulsed Alternators .................................................3873
K. Yu, C. Ye, Y. Pan
Study on a Double Two-Phase Permanent Motor Drive System ..............................................................3877
B. Wang, T. A. Lipo, J. Chu, G. Wei
Research on The Voltage Filter Method for AC Excited Variable Speed Constant
Frequency Generator....................................................................................................................................3883
Q. Zhang
Investigation on a Methodology to Detect Instantaneous Reactive and Harmonic Currents
in Single-Phase Systems ................................................................................................................................3887
Q. Li, W. Wang, L. Qin, L. Zou, Q. Li
Predictive Current Control of the VSC-HVDC System.............................................................................3892
X. Fu, K. Zhou, M. Cheng
The Study of PWM Methods in Permanent Magnet Brushless DC Motor Speed Control
System ............................................................................................................................................................3897
Q. Li, H. Huang, B. Yin
Expression of Single Traveling Field Wave of AC Induction Motors ......................................................3901
X. Liu, X. Tuo, M. Lu
Feedback Linearization Control in AC Servo System ...............................................................................3903
T. Zhang, J. Jiang
Stray Loss Analysis for Magnetic Shielding with Lamination ..................................................................3907
S. Yang, Z. Cheng, W. Yan, Q. Yang, Y. Du
Mechanism Analysis of a Novel Four-Phase Rectify Circuits ...................................................................3912
D. He, L. Luo, Y. Li, P. Shao, F. Liu
A Modified Direct Torque Control Method of Brushless DC Motor Based on Hyper Space
Vector Modulation ........................................................................................................................................3917
J. Yang, Y. Hu, W. Huang, J. Gao, W. Lu
A Control Strategy of Direct Driven Permanent Magnet Synchronous Generator for
Maximum Power Point Tracking in Wind Turbine Application..............................................................3921
Y. Chen, Z. Wang, Y. Shen, L. Kong
Influence of Current Waveform on Rail-Gun Launching Efficiency .......................................................3927
Y. Yang, J. Wang
Calculation and Remedial Strategy of Radial Force of Switched Reluctance Motors with
Eccentricity ....................................................................................................................................................3932
J. Ji, Y. Sun, W. Zhao, X. Zhu, C. Song
A New Kernel-Based Clustering Algorithm for the Multi-Machine Equivalent of Large
Power Systems ...............................................................................................................................................3936
X. Wang, Z. Yan, L. Li, D. Xie
Dynamic Decoupling Control of AC-DC Hybrid Magnetic Bearing Based on Neural
Network Inverse Method ..............................................................................................................................3940
Y. Hong, H. Zhu, Q. Wu, J. Chen, D. Zhu
A Sensorless Initial Rotor Position Estimation Scheme and an Extended Kalman Filter
Observer for the Direct Torque Controlled Permanent Magnet Synchronous Motor Drive.................3945
Q. Jilong, T. Yantao, G. Yimin, Z. Cheng
Principle of Multi-Time Scale Order Reduction and Its Application in AC/DC Hybrid
Power Systems ...............................................................................................................................................3951
F. Ma, L. Fu
Study on Generator Hamiltonian Control Model Based on Dynamic Theory.........................................3957
Y. Zeng, F. Yu, Y. Wang
Analysis and Design of a New Type High-Efficiency Single-Phase Induction Motor Based
on Negative Sequence Magnetic Field Compensation................................................................................3962
H. Zhong, X. Wang, D. Wang, D. Qiao
A Novel Control Method Based on Wavelet Neural Networks for Direct Torque Control in
Induction Motor Drives ................................................................................................................................3967
Z. Li, Y. Ruan
Research of Position Sensorless Control of PMSM Based on High Frequency Signal
Injection .........................................................................................................................................................3973
Y. Chen, L. Wang, L. Kong
Harmonic Detection for Three-Phase Circuit Based on the Improved Analog LMS
Algorithm.......................................................................................................................................................3978
J. Zhang, K. Liu
Research on A Novel Method to Suppress Neutral Harmonic Currents in Three-Phase
Four-Wire Power Systems............................................................................................................................3983
L. Wang, S. Pang
Application Research of Maximum Power Point Tracing Controller Based on Adaptive
Control Strategy in WECS ...........................................................................................................................3987
Z. Liang, W. Zhang, C. Yan
Parameters Identification of Twelve-Phase Synchronous Generator Based on LevenbergMarquardt Algorithm...................................................................................................................................3992
W. Chen, Q. Gong, L. Zhang, M. Yang
Power System State Estimation Based on Nonlinear Programming ........................................................3996
Y. Yude, D. Lijun
An Indirect Adaptive Fuzzy Speed Controller for Permanent Magnet Synchronous Motor.................4002
L. Yongkun, X. Chaoying
A Fast Matlab Toolbox for Electrical Machinery ......................................................................................4008
M. H. Moradi, P. G. Khorasani
Fault Diagnosis Approach of Protective Switching Device Based on Support Vector
Machines ........................................................................................................................................................4014
S. Ma, X. Zhao
Study on Electromagnetic Damp Characteristics of Permanent Magnet Synchronous
Generator.......................................................................................................................................................4018
N. Zhou, G. Ma
Study of Excitation Control Strategies for AC Excited Generator...........................................................4022
J. Wu, J. Zhang, X. Mao, J. Lu, Q. Li
Study of the Flux Observer and Its Optimizing Strategy for Induction Motor Based on
Extended Kalman Filter ...............................................................................................................................4028
Z. Yongjun, W. Jing, C. He
Evaluation of Jiles-Atherton Hystersis Model’s Parameters Using Mix of Simplex Method
and Simulated Annealing Method ...............................................................................................................4033
J. Zeng, B. Bai
Study on Fault-Synchronizing Current and Electromagnetic Torque of Powerformer .........................4037
Z. Zhiqiang, G. Baojun, T. Dajun, L. Yanling
Research on Electromagnetic Field Characteristic of Armature in the Coil Launcher..........................4040
L. Sanqun, Z. Chaowei, L. Zhiyuan, G. Xiaocun, Z. Keyi
Modeling of Flux-Switching Permanent Magnet Motor Drives Using Transient FieldCircuit Co-Simulation Method ....................................................................................................................4044
W. Zhao, M. Cheng, W. Hua, H. Jia
Analysis of Reluctance Coil Launcher Performance Using Coupled Field-Circuit Method ..................4049
Z. Chaowei, D. Pengshu, D. Xiaojun, L. Sanqun, L. Zhiyuan, Z. Guanghui
An Improved Magnetic Property Modeling for Electrical Steel Sheets Based on DoubleExciting Type 2D Measuring System...........................................................................................................4053
Y. Zhang, C. Xu, Y. H. Eum, D. Xie, C. S. Koh
Calculation of Railgun Inductance Gradient by 2-D Finite Element Method .........................................4057
S. Liu, J. Ruan, Z. Du, D. Wang, C. Zhao
Modeling of Potential Transformers for the Very Fast Transient Simulation Based on
Wideband Scattering Parameter Measurements........................................................................................4061
H. Dong, C. Ji, G. Liang, W. Tao, X. Liu
A New Modeling and Simulation Platform-Mworks for Electrical Machine Based on
Modelica.........................................................................................................................................................4065
X. Chen, Z. Wei
An Integrative Modeling Method and Stability Analysis of Higher Order Switching
Converters......................................................................................................................................................4068
W. Shi-Bing, Z. Yufei, C. Jun-Ning, J. Xue-Dong
Measurement-Based Small Signal Modeling for the Smart Power IC .....................................................4072
H. Xu, H. Kim, H. J. Kim
Thermal Modeling of Permanent Magnet Double-Rotor Machine...........................................................4076
A. Wang
A Large Signal Dynamic Model for Buck-Cascaded Buck-Boost Converter in UniversalInput PFC Applications................................................................................................................................4080
Y. Zhou, B. Wang
Level Set Method for Movement Modeling in Finite Element Analysis of
Electromechanical System............................................................................................................................4086
M. K. Baek, Y. S. Kim, I. H. Park
Model and Experiment of Giant Magnetostrictive Vibration Sensor.......................................................4092
L. Weng, B. Wang, Y. Sun, S. Li, Q. Yang
Calculation of Muti-Power Supplies Short Circuit Based on Distribution Grid’s Structure
Characteristics...............................................................................................................................................4096
W. Lantian, L. Kaipei, L. Xiaoli, H. Po, W. Yumin
Aircraft Power Distribution System Large-Signal Modeling and Control ..............................................4102
W. Liu, J. Gong, S. Xie
Study of Virtual Ship Power Station Based on Creator—Vega ................................................................4107
Y. Guohao, J. Chuanli, X. Yiqun, W. Yongjian
Simulation of Brushless Doubly-Fed Generator Base on Hybrid Reference Frame Model
and Tensor Method .......................................................................................................................................4110
S. Gong, X. Yang, G. Peng
Three-Phase Transformer Models for Load Flow Calculations in Power Systems.................................4114
J. Kang, L. Fu
Simulation and Experiment Verification of Differential Pressure Sensor with Magnetic
Fluid ...............................................................................................................................................................4119
W. Yang, Z. Wang, Q. Yang, M. Xu, D. Li
Research on Loss Model and Junction Temperature of IGBT for Electric Vehicles Using
PSPICE ..........................................................................................................................................................4123
W. Hu, X. Wen, H. Wen, J. Liu
Analysis of Single-Phase Induction Motor by Using Circuit-Coupled Finite Element
Method ...........................................................................................................................................................4127
N. Tong, F. Zhang, J. Wang
A Platform for Inverter System Research Based on Semi-Physical Simulation......................................4131
W. Hongfei, H. Zhongyi, Q. Biaojie, Xingyan
Modeling and Simulation of Seven Level Inverter Based on Multi-Carrier Control..............................4136
Y. Guo, Y. Li, J. Zhu
The Building and Analyzing of the Fifth-Order Model of the Synchronous Generator in
Stand-Alone Infinite System.........................................................................................................................4139
Z. Li, L. Cui
A Dynamic Model of Electromagnetic Relay Including Contact Bounce.................................................4144
X. Jun, H. Jun-jia, Z. Chun-yan
Three-Dimensional Numerical Simulation on Helical Channel MHD Thruster .....................................4150
H. Jiang, Y. Peng, L. Zhao, C. Sha, Z. Lin, R. Li
A New Equivalent Circuit for the Brushless Doubly-Fed Machine ..........................................................4155
F. Xiong, X. Wang, J. Zhang, C. Kan, T. Wu
Effective Simulation of Stability of 3/12-Phase Synchronous Generators with Simultaneous
AC and DC Stator Connections Using MATLAB ......................................................................................4160
W. Shanming, Z. Anming, W. Xiangheng, S. Pengsheng
Research on Mathematical Models and Leakage Reactances Measurement of DoubleWinding AC-DC Generator .........................................................................................................................4164
W. Xusheng, Z. Junhong, H. Nan, L. Zhongyan
Simulation Researches on Temperature Rise of a Vacuum Interrupter for High Current
Applications ...................................................................................................................................................4167
L. Yu, S. Yuan, F. Li, J. Xu
Model of the Unit Controlling and Driving for RTWUSM Based on MCM............................................4171
D. Jun, G. Juping, H. Minqiang, J. Long, X. Chen, W. Xiao, T. Lanlan
Research on Three-Phase Four-Wire Shunt Active Power Filter for Harmonic and
Reactive Compensation.................................................................................................................................4174
T. Yue-xin, C. Hai-yan, Z. Yan-ping
Analysis and Design of PDM HF Converter for Mining Local Fanner....................................................4178
M. Xian-Min
A Study on the Compensation Capacitor in Ballast Track Circuit ..........................................................4182
M. S. Kim, J. W. Lee, J. S. Ko
The Estimation of Pitch Angle in Pitch-Controlled Wind Turbine ..........................................................4188
Y. Liu, H. Gho, H. Wang, J. He
Electromagnetic Analyzing of Slotless Evaporative Cooling Generator ..................................................4192
X. Peng, H. Guo
Study of Six-Pole Magnetic Bearing ............................................................................................................4195
J. Luo, L. Xu, R. Ma
A 3-D SVPWM Without Medium Vectors For 3-Phase 3-Wire 3-Level Rectifier ..................................4199
W. Wenjun, Z. Yanru, D. Bo
Application of Three-Phase Current Source Converter in Power Battery Testing System
for Electric Vehicles ......................................................................................................................................4205
X. Yan, C. Du, H. Li, L. Zhang, F. Wang
Performance of UPFC Integrated with SMES for Power Systems Controlling ......................................4210
A. Tang, P. Yin, X. Xu, S. Wang, S. Cheng
Operational Mechanism and Characteristic Analysis of Directly Driven Wind Turbine
with Complex Structure and Permanent Magnet Synchronous Generator.............................................4215
L. Chen, H. Wang, X. Duan
Research on Combined Three-Subsection Permanent Magnet Model in the Close Magnetic
Circuit ............................................................................................................................................................4220
H. Liang, J. Xu, R. Zhang, G. Zhai
Trajectory Sensitivity Analysis of Influences of Excitation System and Governors on the
Dynamics of Hydroelectric Generating Unit ..............................................................................................4224
Z. Yuan, X. Li, X. Hu, Q. Ni
Effects of Inductor Shape on the Performance of Axial Flux Inductor Type
Superconducting Motor................................................................................................................................4230
L. Liyi, Y. Tao, K. Baoquan
Cage Rotor Structure and Its Effect on Magnetic Field Modulation of Brushless DoublyFed Machine ..................................................................................................................................................4234
Q. Gao, L. Han, C. Luo, R. Ye
Effects of the Inverter Parameters on the Eddy Current Losses in Induction Motor Fed by
PWM Inverter ...............................................................................................................................................4240
B. Zhu, B. Bai, H. He
Harmonic Analysis of the Converter Stations Modulated By GIC in HVDC Transmission
Lines ...............................................................................................................................................................4244
W. Li, J. Wen, L. Liu, G. Ma, L. Wang, C. Xu
A New Three-Phase Doubly Salient Electrical Magnet Generator for Direct-Driven Wind
Power Generation..........................................................................................................................................4250
J. Wei, B. Zhou, F. Cheng, Z. Zhang, C. Hu, X. Wu
Transmission Planning Considering Reliability and Economic Performances in A
Deregulated Environment ............................................................................................................................4253
Z. Gao, Q. Tan, H. Chen, Y. Qian
Applied Research on Controllable Shunt Reactor in Ultra-High Voltage AC Transmission
System ............................................................................................................................................................4258
Y. Xie, B. Chen
Electro-Hydraulic Braking Control System Based on Electro-Rheological Technology ........................4263
S. Hou, Q. Yang, W. Yang, R. Yan, H. Chen, J. Lou
Modeling of a Squirrel Cage Induction Generator ....................................................................................4267
A. Movahednasab, S. M. Madani, M. M. Shahbazi
Design Optimization of Tooth-Harmonic Brushless Doubly-Fed Machine..............................................4272
C. Kan, X. Wang, F. Xiong, J. Zhang, T. Wu, H. Tang
Analysis and Improve of Electromagnet Mechanism for Integrated Control and Protective
Switching Devices ..........................................................................................................................................4277
Z. Cai, H. Gong, S. Ma
A Nonlinear PI Controller of the Brushless DC Motor Based on Ant Colony System............................4281
P. Shu, G. Shi, Y. Lin
Relationship Between Multi-Broken-Bar Position and Faulty Feature on Squirrel Cage
Induction Motor ............................................................................................................................................4285
R. Wang, H. Wu, W. Xu, C. Huang
Study on the Electromagnetic Transient State in the New Converter Transformer Based
on Coupled Field-Circuit Method................................................................................................................4291
L. Luo, H. Li, Y. Li, C. Rehtanz, F. Liu
A New Hybrid Model of Transformer Windings Under Very Fast Transient Overvoltages .................4296
X. Zhu, H. Dong, G. Liang, C. Ji
Design and Analysis of a 10 kVA HTS Transformer .................................................................................4302
X. Chen, J. Jin, Y. Guo, J. Zhu
Computer Simulation Model of Transformer Considering the Influences of Saturation.......................4305
S. Huang, A. Gui, L. Zhao
A Modeling for Transformer Windings Under Very Fast Transient Over-Voltages..............................4309
P. Zhang, Y. Wang, X. Nie, W. Yan, H. Zhang
On-Line Monitoring and Study of Transformer DC Bias .........................................................................4313
L. Hailiang, W. Xishan, L. Xiaoping, T. Xuefang
A New Approach to Identify Inrush Current Based on Generalized S-Transform ................................4317
S. Jiao, S. Wang, G. Zheng
Modeling and Test of Contactless Transformer Used in Inductosyn .......................................................4323
L. C. Jun, Q. Ming, Z. J. Bin
A Novel Comparator Centered on the Controlled Saturable Reactor .....................................................4328
L. Qi, W. Li
Application of Phase-Shifting Reactor in Harmonic Suppression of the Independent Power
Supply System ...............................................................................................................................................4332
L. Zhou, Z. Yin, X. Xiao, Q. Song
Impact of Saturation Depth Ratio of Iron-Core on the PMFCL ..............................................................4338
L. Zou, Y. Ma, H. Liu, Q. Li, S. Sun
Development of A Comprehensive Power Quality Controller for Power Distribution
System ............................................................................................................................................................4344
C. Tu, H. Pan, K. Peng, A. Luo
The Inverse Design Method of Electromagnetic Relay Reaction System.................................................4349
W. Fan, G. Zhai, S. Wu
Safety Measurement of Capacitive Current for Coal Mine Distribution Network .................................4354
J. Zhao, N. Li, Y. Hou
Design and Analysis of Vacuum Circuit Breaker of Paralleled Breaks Based on PhaseControl Technology.......................................................................................................................................4357
X. Zheng, J. Zou, Z. Cheng, B. Tong
Performance Analysis of Sliding Transformer in Contactless Inductive Power Transfer
System ............................................................................................................................................................4360
W. Xie, H. Li, C. Wang
A Novel Double-Side Average Equivalent Instantaneous Inductance in Nonsaturation
Zone Based Transformer Protection ...........................................................................................................4364
D. Q. Bi, S. S. Li, X. H. Wang, W. J. Wang
Fast Time-Domain Algorithm of Very Fast Transient in Power Transformer Windings
with Wound-in-Shields .................................................................................................................................4370
G. Liang, H. Dong, X. Liu, X. Zhang
Three Phase Transformer Modeling with Consideration the Core Effect ...............................................4375
S. Javadi, B. Vahidi, S. H. Hosseinian
The Mathematical Model of the New Converter Transformer Based on Modified Node
Method ...........................................................................................................................................................4379
Z. Zhao, L. Luo, Y. Li, J. Zhang, D. He, P. Shao
A Novel Controllable Reactor of Transformer Type .................................................................................4384
Y. Zhang, Q. Chen, J. Tian
Effective Electromagnetic Field Analysis Using Finite Element Method for High
Frequency Transformers with Litz-Wire....................................................................................................4388
Y. Suzuki, I. Hasegawa, S. Sakabe, T. Yamada
Theoretical Analysis and Experiment Research of High Temperature Superconducting
Air-Core Transformer ..................................................................................................................................4394
M. Song, Y. Tang, N. Chen, Z. Li, Y. Zhou
Modified Integrated Congruence Transform and Its Application in Computation of VFTO
Distribution in Transformer Windings .......................................................................................................4398
C. Ji, H. Dong, G. Liang, H. Ran
Study on Surge Current and Over-Voltage of Electric Locomotive Transformer..................................4403
L. Luo, Y. Wang, W. D. Shi
Synthetical Analysis of Interleaving Techniques’ Effect on High-Frequency Transformer’s
Parameters.....................................................................................................................................................4407
L. Zhihua, L. Henglian
Experimental Measurement and Modeling of Multi-Winding High-Voltage Transformer ...................4411
J. Zhou, Q. Chen, X. Ruan, S. C. Wong, C. K. Tse
A Novel Direction Protection Principle for Power Transformer ..............................................................4416
B. Gu, J. Tan
The FE-Based State Space Analysis for Saturated Transformer..............................................................4419
Y. Yao, S. Xiong, D. Jiang, Z. Wu
The Calculation of Ampere Force on Electric Power Transformer Under the Short Circuit
Situation .........................................................................................................................................................4423
L. Jiao, B. Bai, H. Li
Improvement of Main Insulation Structure for 110kV Electric Power Transformer Based
on Electric Field Analysis .............................................................................................................................4427
G. Yonhua, G. Dan, L. Yanbin, G. Shuqiu, W. Guogang
A Power-Line Energizing System for Active Power Electronic Current Transformer ..........................4431
J. Chen, R. Yan, W. Yang, H. Zhao
Model Test for Harmonic Characteristics of Convertor Transformer Under Dc Bias...........................4436
H. Li, F. Lin, Z. Gui
A Novel Variable Reactor with Transformer and Inverter Control.........................................................4440
D. Li, J. Tian
Research on DC Magnetic Flux Controllable Reactor...............................................................................4444
K. Bao-quan, T. Hong-jiang, L. Liyi
Analysis of Magnetic Field with Single Controlled Winding Controllable Reactor................................4448
Z. Lawu, L. Junyan, X. Lei
Influence of Switching Conditions on Very Fast Transient Over-voltage in 500kV Gas
Insulated Substation......................................................................................................................................4451
Q. Liu, Y. Zhang
Operational Characteristics of Three-Phase Active Superconducting Fault Current
Limiter in Power System ..............................................................................................................................4455
L. Chen, Y. Tang, N. Chen, J. Shi, M. Song, S. Cheng
Variable-Phase Contactless Energy Transfer Desktop Part I: Design .....................................................4460
C. L. W. Sonntag, E. A. Lomonova, J. L. Duarte
FEM Analysis of Non-Contact Feeding System for Electric Vehicle........................................................4466
K. Yoshikura, M. Morimoto
Research of Fast and Non-Impact On-Load Tap Changing Regulator for Electrolytic
Process............................................................................................................................................................4470
L. Xiaoming, H. Junjie
An Optimized Sync Control Method for Vacuum Circuit Breaker..........................................................4475
K. Wang, X. Zhang, J. Chen
A Novel Reactive Power Compensator Based On Current Control .........................................................4479
T. Jun, C. Qiaofu, J. Fang
Design Principle of a Novel Automatic Tuning Arc Suppression Coil System ........................................4483
C. Lu, C. Qiaofu, Z. Yu
An Engineering Practical Method for Simulation of Anisotropic Laminated Core Joints
and Validation ...............................................................................................................................................4489
X. Zhang, Q. Yang, Z. Cheng, J. Xing, Y. Du, J. Zhang
Development and Application of Flexible Smart Transducer Based on TMS320F2812.........................4493
L. Zhijun, L. Dongling, M. Ailong
The Influence and Countermeasure to Transformer Differential Protection of CT
Saturation Caused by External Fault Removal ..........................................................................................4497
J. Gu, T. Zheng, S. Huang
Research on 1000kV Series Standard Potential Transformer ..................................................................4503
M. Lei, F. Zhou, H. Zheng, Z. Hu, K. Xiao
Calculation of Leakage Reactance for HTS Transformer Windings with Magneto-Motive
Force Imbalance ............................................................................................................................................4507
X. Li, Q. Chen, S. Wu, Y. Zhou
Author Index