Machine Safety Presentations
Safety Unit
Presentations
• Tool Safety
• Machine Safety
• Teaching yourselves and peers
Tricks and Tips
• Watch the “Power Point Basics video
• (embed)
Research
• Review the handouts
• Diagram and Machine Safety
Diagram
• Use the diagram to photograph the machine
parts
• Use the photos in your presentation
• Label the parts appropriately
QuickTime™ and a
decompressor
are needed to see this picture.
Presenting
•
View Mr. H’s presentation
•
Your presentation should include:
1.
2.
3.
4.
Title
Machine description
Top 10 Safety Rules
Top 10 Operational Rules
Paraphrasing
• Reword all information
• Include references
Table Saw
Mr. Heydens
Table Saws
• Rip, cross cut, bevel and cut angles
• Precise
Top 10 Safety Rules
1. 3”rule
2. Hands off saw
3. Align fence
Top 10 Safety Rules
4. Be aware
5. Use guard
QuickTime™ and a
decompressor
are needed to see this picture.
6. Adjust when the machine is off
Top 10 Safety Rules
7. Saw must be off when clearing it
8. Do not over reach
QuickTime™ and a
decompressor
are needed to see this picture.
9. Use a stop block when cross cutting
10. Raise blade 1/4” above stock
Operational Safety Rules
1. Operate with a positive and safe attitude (#1)
2. Disconnect power when not in use (#2)
3. Use the cross cut sled (#8)
QuickTime™ and a
decompressor
are needed to see this picture.
Operational Safety Rules
4. Use a stop block when cutting multiples (# 9)
5. Ensure no one is behind you (# 11)
6. Use a push stick when stock is within 4” of
blade(#13)
Operational Safety Rules
7. Stand comfortably (#14)
8. Stand to the left of the blade (#15)
9. Make sure the blade has stopped turning (#16)
Table Saw
Partners
• Find who has the matching card
Grade 7 Topics
• Belt / Disc Sander
• Scroll Saw
• Drill Press
Grade 8 Topics
•
•
•
•
•
Band saw
Scroll Saw
Router
Drill Press
Belt / Disc Sander
Grade 9 Topics
•
•
•
•
•
•
Band saw
Scroll Saw
Router
Drill Press
Compound Miter Saw
Belt / Disc Sander